Re: [PATCH v2 4/4] arm64: dts: qcom: msm8953: add MDSS

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 12/06/2022 12:22, Luca Weiss wrote:
> From: Vladimir Lypak <vladimir.lypak@gmail.com>
> 
> Add the MDSS, MDP and DSI nodes that are found on msm8953 SoC.
> 
> Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> Changes from v1:
> - disable nodes by default, thanks Dmitry!
> - enable iommu for mdp
> 
>   arch/arm64/boot/dts/qcom/msm8953.dtsi | 208 ++++++++++++++++++++++++++
>   1 file changed, 208 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
> index 961db3e23ee4..c7373c845f41 100644
> --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
> @@ -726,6 +726,214 @@ tcsr_phy_clk_scheme_sel: syscon@193f044 {
>   			reg = <0x193f044 0x4>;
>   		};
>   
> +		mdss: mdss@1a00000 {
> +			compatible = "qcom,mdss";
> +
> +			reg = <0x1a00000 0x1000>,
> +			      <0x1ab0000 0x1040>;
> +			reg-names = "mdss_phys",
> +				    "vbif_phys";
> +
> +			power-domains = <&gcc MDSS_GDSC>;
> +			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			clocks = <&gcc GCC_MDSS_AHB_CLK>,
> +				 <&gcc GCC_MDSS_AXI_CLK>,
> +				 <&gcc GCC_MDSS_VSYNC_CLK>;
> +			clock-names = "iface",
> +				      "bus",
> +				      "vsync";

I've sent the patches using "core" clock for the mdss ([1]). Please 
consider utilizing it here.

[1]: https://patchwork.freedesktop.org/series/105162/

> +
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			status = "disabled";
> +
[skipped the rest]

-- 
With best wishes
Dmitry