[PATCH] arm: dts: apq8084: Remove all instances of IRQ_TYPE_NONE

[Victhor Foster <victhor.foster@ufpe.br>]

This patch removes all instances of IRQ_TYPE_NONE, which fixes warning messages during boot. It also changes interrupt types to their corresponding macros, as defined in arm-gic.h.

Signed-off by: Victhor Foster <victhor.foster@ufpe.br>
---
 arch/arm/boot/dts/qcom-apq8084.dtsi | 40 ++++++++++++++---------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 0a0fb147ebb9..1724a87afc4f 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-apq8084.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -184,7 +185,7 @@ cpu_crit3: trip1 {
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 7 0xf04>;
+		interrupts = <GIC_PPI 7 0xf04>;
 	};
 
 	clocks {
@@ -203,10 +204,10 @@ sleep_clk: sleep_clk {
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 2 0xf08>,
-			     <1 3 0xf08>,
-			     <1 4 0xf08>,
-			     <1 1 0xf08>;
+		interrupts = <GIC_PPI 2 0xf08>,
+			     <GIC_PPI 3 0xf08>,
+			     <GIC_PPI 4 0xf08>,
+			     <GIC_PPI 1 0xf08>;
 		clock-frequency = <19200000>;
 	};
 
@@ -258,7 +259,6 @@ tsens: thermal-sensor@fc4a8000 {
 			nvmem-cell-names = "calib", "calib_backup";
 			#thermal-sensor-cells = <1>;
 		};
-
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -269,50 +269,50 @@ timer@f9020000 {
 
 			frame@f9021000 {
 				frame-number = <0>;
-				interrupts = <0 8 0x4>,
-					     <0 7 0x4>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9021000 0x1000>,
 				      <0xf9022000 0x1000>;
 			};
 
 			frame@f9023000 {
 				frame-number = <1>;
-				interrupts = <0 9 0x4>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9023000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9024000 {
 				frame-number = <2>;
-				interrupts = <0 10 0x4>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9024000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9025000 {
 				frame-number = <3>;
-				interrupts = <0 11 0x4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9025000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9026000 {
 				frame-number = <4>;
-				interrupts = <0 12 0x4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9026000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9027000 {
 				frame-number = <5>;
-				interrupts = <0 13 0x4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9027000 0x1000>;
 				status = "disabled";
 			};
 
 			frame@f9028000 {
 				frame-number = <6>;
-				interrupts = <0 14 0x4>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xf9028000 0x1000>;
 				status = "disabled";
 			};
@@ -404,13 +404,13 @@ tlmm: pinctrl@fd510000 {
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			interrupts = <0 208 0>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		blsp2_uart2: serial@f995e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf995e000 0x1000>;
-			interrupts = <0 114 0x0>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
@@ -420,7 +420,7 @@ sdhci@f9824900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 123 0>, <0 138 0>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&gcc GCC_SDCC1_AHB_CLK>,
@@ -433,7 +433,7 @@ sdhci@f98a4900 {
 			compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <0 125 0>, <0 221 0>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&gcc GCC_SDCC2_AHB_CLK>,
@@ -449,7 +449,7 @@ spmi_bus: spmi@fc4cf000 {
 			      <0xfc4cb000 0x1000>,
 			      <0xfc4ca000 0x1000>;
 			interrupt-names = "periph_irq";
-			interrupts = <0 190 0>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
@@ -463,7 +463,7 @@ smd {
 		compatible = "qcom,smd";
 
 		rpm {
-			interrupts = <0 168 1>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
 			qcom,ipc = <&apcs 8 0>;
 			qcom,smd-edge = <15>;
 
-- 
2.24.0