[PATCH v2] Bluetooth: Add socket option definitions for AMP

[PATCH v2] Bluetooth: Add socket option definitions for AMP

[Mat Martineau]

This adds a new BT_AMP socket option to control the use of AMP channels.
It is for use with the SOL_BLUETOOTH option level on L2CAP sockets.

Available option values are defined as:

BT_AMP_REQUIRE_BR_EDR
 * Default
 * AMP controllers cannot be used
 * Channel move requests from the remote device are denied
 * If the L2CAP channel is currently using AMP, move the channel to
   BR/EDR

BT_AMP_PREFER_AMP
 * Allow use of AMP controllers
 * If the L2CAP channel is currently on BR/EDR and AMP controller
   resources are available, initiate a channel move to AMP
 * Channel move requests from the remote device are allowed
 * If the L2CAP socket has not been connected yet, try to create
   and configure the channel directly on an AMP controller rather
   than BR/EDR

BT_AMP_PREFER_BR_EDR
 * Allow use of AMP controllers
 * If the L2CAP channel is currently on AMP, move it to BR/EDR
 * Channel move requests from the remote device are allowed

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
 include/net/bluetooth/bluetooth.h |   25 +++++++++++++++++++++++++
 1 files changed, 25 insertions(+), 0 deletions(-)

diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 27a902d..5e8b6c3 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -64,6 +64,31 @@ struct bt_security {
 
 #define BT_DEFER_SETUP	7
 
+
+#define BT_AMP_POLICY		8
+/* Require BR/EDR (default policy)
+ *   AMP controllers cannot be used
+ *   Channel move requests from the remote device are denied
+ *   If the L2CAP channel is currently using AMP, move the channel to BR/EDR
+ */
+#define BT_AMP_POLICY_REQUIRE_BR_EDR	0
+/* Prefer AMP
+ *   Allow use of AMP controllers
+ *   If the L2CAP channel is currently on BR/EDR and AMP controller
+ *     resources are available, initiate a channel move to AMP
+ *   Channel move requests from the remote device are allowed
+ *   If the L2CAP socket has not been connected yet, try to create
+ *     and configure the channel directly on an AMP controller rather
+ *     than BR/EDR
+ */
+#define BT_AMP_POLICY_PREFER_AMP	1
+/* Prefer BR/EDR
+ *   Allow use of AMP controllers
+ *   If the L2CAP channel is currently on AMP, move it to BR/EDR
+ *   Channel move requests from the remote device are allowed
+ */
+#define BT_AMP_POLICY_PREFER_BR_EDR	2
+
 #define BT_INFO(fmt, arg...) printk(KERN_INFO "Bluetooth: " fmt "\n" , ## arg)
 #define BT_ERR(fmt, arg...)  printk(KERN_ERR "%s: " fmt "\n" , __func__ , ## arg)
 #define BT_DBG(fmt, arg...)  pr_debug("%s: " fmt "\n" , __func__ , ## arg)
-- 
1.7.1

Re: [PATCH v2] Bluetooth: Add socket option definitions for AMP

[Gustavo F. Padovan]

Hi Mat,

* Mat Martineau <mathewm@codeaurora.org> [2010-09-08 09:46:14 -0700]:

> This adds a new BT_AMP socket option to control the use of AMP channels.
> It is for use with the SOL_BLUETOOTH option level on L2CAP sockets.
> 
> Available option values are defined as:
> 
> BT_AMP_REQUIRE_BR_EDR
>  * Default
>  * AMP controllers cannot be used
>  * Channel move requests from the remote device are denied
>  * If the L2CAP channel is currently using AMP, move the channel to
>    BR/EDR
> 
> BT_AMP_PREFER_AMP
>  * Allow use of AMP controllers
>  * If the L2CAP channel is currently on BR/EDR and AMP controller
>    resources are available, initiate a channel move to AMP
>  * Channel move requests from the remote device are allowed
>  * If the L2CAP socket has not been connected yet, try to create
>    and configure the channel directly on an AMP controller rather
>    than BR/EDR
> 
> BT_AMP_PREFER_BR_EDR
>  * Allow use of AMP controllers
>  * If the L2CAP channel is currently on AMP, move it to BR/EDR
>  * Channel move requests from the remote device are allowed
> 
> Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
> ---
>  include/net/bluetooth/bluetooth.h |   25 +++++++++++++++++++++++++
>  1 files changed, 25 insertions(+), 0 deletions(-)
> 
> diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
> index 27a902d..5e8b6c3 100644
> --- a/include/net/bluetooth/bluetooth.h
> +++ b/include/net/bluetooth/bluetooth.h
> @@ -64,6 +64,31 @@ struct bt_security {
>  
>  #define BT_DEFER_SETUP	7
>  
> +
> +#define BT_AMP_POLICY		8

Please add a empty line here.

> +/* Require BR/EDR (default policy)
> + *   AMP controllers cannot be used
> + *   Channel move requests from the remote device are denied
> + *   If the L2CAP channel is currently using AMP, move the channel to BR/EDR
> + */
> +#define BT_AMP_POLICY_REQUIRE_BR_EDR	0

And here.

> +/* Prefer AMP
> + *   Allow use of AMP controllers
> + *   If the L2CAP channel is currently on BR/EDR and AMP controller
> + *     resources are available, initiate a channel move to AMP
> + *   Channel move requests from the remote device are allowed
> + *   If the L2CAP socket has not been connected yet, try to create
> + *     and configure the channel directly on an AMP controller rather
> + *     than BR/EDR
> + */
> +#define BT_AMP_POLICY_PREFER_AMP	1

And here.

> +/* Prefer BR/EDR
> + *   Allow use of AMP controllers
> + *   If the L2CAP channel is currently on AMP, move it to BR/EDR
> + *   Channel move requests from the remote device are allowed
> + */
> +#define BT_AMP_POLICY_PREFER_BR_EDR	2
> +
>  #define BT_INFO(fmt, arg...) printk(KERN_INFO "Bluetooth: " fmt "\n" , ## arg)
>  #define BT_ERR(fmt, arg...)  printk(KERN_ERR "%s: " fmt "\n" , __func__ , ## arg)
>  #define BT_DBG(fmt, arg...)  pr_debug("%s: " fmt "\n" , __func__ , ## arg)
> -- 
> 1.7.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Gustavo F. Padovan
roFUSION embedded systems - http://profusion.mobi