From: Pavankumar Kondeti <pkondeti@codeaurora.org>
To: greg@kroah.com, linux-usb@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org,
Pavankumar Kondeti <pkondeti@codeaurora.org>
Subject: [PATCH] USB: Fix trout build failure with ci13xxx_msm gadget
Date: Fri, 4 Feb 2011 10:08:18 +0530 [thread overview]
Message-ID: <1296794298-3208-1-git-send-email-pkondeti@codeaurora.org> (raw)
This patch fixes the below compilation errors.
CC drivers/usb/gadget/ci13xxx_msm.o
CC net/mac80211/led.o
drivers/usb/gadget/ci13xxx_msm.c: In function 'ci13xxx_msm_notify_event':
drivers/usb/gadget/ci13xxx_msm.c:42: error: 'USB_AHBBURST' undeclared (first use in this function)
drivers/usb/gadget/ci13xxx_msm.c:42: error: (Each undeclared identifier is reported only once
drivers/usb/gadget/ci13xxx_msm.c:42: error: for each function it appears in.)
drivers/usb/gadget/ci13xxx_msm.c:43: error: 'USB_AHBMODE' undeclared (first use in this function)
make[4]: *** [drivers/usb/gadget/ci13xxx_msm.o] Error 1
make[3]: *** [drivers/usb/gadget] Error 2
MSM USB driver is not supported on boards like trout (MSM7201) which
has an external PHY.
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
---
drivers/usb/gadget/Kconfig | 2 ++
drivers/usb/host/Kconfig | 2 ++
drivers/usb/otg/Kconfig | 2 ++
include/linux/usb/msm_hsusb_hw.h | 4 ----
4 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 06bb9d4..d500996 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -546,6 +546,8 @@ config USB_GADGET_CI13XXX_MSM
ci13xxx_udc core.
This driver depends on OTG driver for PHY initialization,
clock management, powering up VBUS, and power management.
+ This driver is not supported on boards like trout which
+ has an external PHY.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "ci13xxx_msm" and force all
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 24046c0..0e6afa2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -151,6 +151,8 @@ config USB_EHCI_MSM
Qualcomm chipsets. Root Hub has inbuilt TT.
This driver depends on OTG driver for PHY initialization,
clock management, powering up VBUS, and power management.
+ This driver is not supported on boards like trout which
+ has an external PHY.
config USB_EHCI_HCD_PPC_OF
bool "EHCI support for PPC USB controller on OF platform bus"
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 9fb875d..9ffc823 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -103,6 +103,8 @@ config USB_MSM_OTG_72K
required after resetting the hardware and power management.
This driver is required even for peripheral only or host only
mode configurations.
+ This driver is not supported on boards like trout which
+ has an external PHY.
config AB8500_USB
tristate "AB8500 USB Transceiver Driver"
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
index b92e173..7d1babb 100644
--- a/include/linux/usb/msm_hsusb_hw.h
+++ b/include/linux/usb/msm_hsusb_hw.h
@@ -16,12 +16,8 @@
#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
#define __LINUX_USB_GADGET_MSM72K_UDC_H__
-#ifdef CONFIG_ARCH_MSM7X00A
-#define USB_SBUSCFG (MSM_USB_BASE + 0x0090)
-#else
#define USB_AHBBURST (MSM_USB_BASE + 0x0090)
#define USB_AHBMODE (MSM_USB_BASE + 0x0098)
-#endif
#define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */
#define USB_USBCMD (MSM_USB_BASE + 0x0140)
--
1.7.1
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next reply other threads:[~2011-02-04 4:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-04 4:38 Pavankumar Kondeti [this message]
2011-02-04 22:07 ` [PATCH] USB: Fix trout build failure with ci13xxx_msm gadget Daniel Walker
2011-02-04 22:14 ` Bryan Huntsman
2011-02-04 22:14 ` David Brown
2011-04-05 12:55 ` Felipe Balbi
2011-04-07 10:34 ` Pavan Kondeti
2011-04-13 8:24 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1296794298-3208-1-git-send-email-pkondeti@codeaurora.org \
--to=pkondeti@codeaurora.org \
--cc=greg@kroah.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).