From: Tatyana Brokhman <tlinder@codeaurora.org>
To: gregkh@suse.de
Cc: linux-arm-msm@vger.kernel.org, ablay@codeaurora.org,
Tatyana Brokhman <tlinder@codeaurora.org>,
"open list:USB GADGET/PERIPH..." <linux-usb@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [RFC/PATCH 5/5] uas: HACK needed for UAS host.
Date: Mon, 7 Mar 2011 18:48:51 +0200 [thread overview]
Message-ID: <1299516532-28866-1-git-send-email-tlinder@codeaurora.org> (raw)
REMOVE LATER ON!
In today's UAS host driver MODE SENSE command isn't handled correctly.
Each time after power up there is a unit attention condition of
RESET_OCCURRED that needs to be cleared (= acknowledged by the
host) by the MODE SENSE command.
Due to the above this patch resets the RESET_OCCURRED unit attention.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
diff --git a/drivers/usb/gadget/uasp_cmdiu.c b/drivers/usb/gadget/uasp_cmdiu.c
index 4df3d98..51eb132 100644
--- a/drivers/usb/gadget/uasp_cmdiu.c
+++ b/drivers/usb/gadget/uasp_cmdiu.c
@@ -83,6 +83,13 @@ static __u32 check_cmdiu(struct uasp_dev *udev,
curlun->lun->unit_attention_data = SS_NO_SENSE;
return ua_data;
}
+ /* HACK!!! REMOVE!!! */
+ if (curlun->lun->unit_attention_data == SS_RESET_OCCURRED &&
+ cmdiu->cdb[0] == INQUIRY) {
+ curlun->lun->unit_attention_data = SS_NO_SENSE;
+ DBG(udev->ucommon->common, "check_cmdiu() - "
+ "HACK!!! RESETTING unit attention condition\n");
+ }
}
if (curlun && !(curlun->lun->filp) && needs_medium) {
--
1.7.0.4
--
Sent by a Consultant for Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
next reply other threads:[~2011-03-07 16:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-07 16:48 Tatyana Brokhman [this message]
2011-03-07 16:52 ` [RFC/PATCH 5/5] uas: HACK needed for UAS host Greg KH
2011-03-07 16:56 ` Tanya Brokhman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1299516532-28866-1-git-send-email-tlinder@codeaurora.org \
--to=tlinder@codeaurora.org \
--cc=ablay@codeaurora.org \
--cc=gregkh@suse.de \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).