Re: [PATCH 4/4] ARM: dts: qcom: msm8974: Add device tree for Samsung Galaxy S5 China

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 21/01/2024 16:39, Rong Zhang wrote:
> This device has little difference compared to Samsung Galaxy S5 (klte),
> so the device tree is based on qcom-msm8974pro-samsung-klte.dts. The
> only difference is the gpio pins of i2c_led_gpio. With pins corrected,
> the LEDs and WiFi are able to work properly.
> 
> Signed-off-by: Rong Zhang <i@rong.moe>


> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts
> new file mode 100644
> index 000000000000..5a8d59ea4439
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include "qcom-msm8974pro-samsung-klte.dts"
> +
> +/ {
> +	model = "Samsung Galaxy S5 China";
> +	compatible = "samsung,kltechn", "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";

That's not what you said in the binding.

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Best regards,
Krzysztof