linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tatyana Brokhman <tlinder@codeaurora.org>
To: gregkh@suse.de
Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
	balbi@ti.com, ablay@codeaurora.org,
	Tatyana Brokhman <tlinder@codeaurora.org>
Subject: [PATCH v6 0/5] usb gadget: Add SuperSpeed support to the Gadget Framework
Date: Wed, 23 Mar 2011 10:01:52 +0200	[thread overview]
Message-ID: <1300867313-20751-1-git-send-email-tlinder@codeaurora.org> (raw)

It was tested in the following ways:
1. Dummy_hcd and g_zero gadget with our internally developed unittest. 
   (See bellow)
2. Our DCD (that is not ready for upstreaming yet but we're working on
   it) and g_mass_storage gadget. With this setup we passed USBCV 2.0 and 3.0.
3. We developed a UAS gadget driver that is also working with this
   implementation over our DCD and the UAS Linux host driver. Its operational
   both in SS and in HS mode. Was released to the community in another patch series.
4. All of the other existing gadget drivers were minimally testes on
   the dummy_hcd setup as well (successful enumeration).

The unittest framework that was used for testing can be downloaded from 
git://codeaurora.org/quic/usb3/ut/.git
Please use the upstream branch.
See https://www.codeaurora.org/gitweb/quic/usb3/?p=ut/.git;a=summary for more 
details.

Tatyana Brokhman (5):
  usb: Adding SuperSpeed support to dummy_hcd
  usb: Add usb_endpoint_descriptor to be part of the struct usb_ep
  usb: Configure endpoint according to gadget speed.
  usb: Modify existing gadget drivers to use config_ep_by_speed()
    instead of     ep_choose.
  usb:gadget: Add SuperSpeed support to the Gadget Framework

 drivers/usb/gadget/Kconfig          |   12 +
 drivers/usb/gadget/composite.c      |  458 +++++++++++++++++++++++++++++--
 drivers/usb/gadget/config.c         |   25 --
 drivers/usb/gadget/dbgp.c           |    8 +-
 drivers/usb/gadget/dummy_hcd.c      |  519 ++++++++++++++++++++++++++++++++++-
 drivers/usb/gadget/epautoconf.c     |    7 +-
 drivers/usb/gadget/f_acm.c          |   50 +---
 drivers/usb/gadget/f_audio.c        |    5 +-
 drivers/usb/gadget/f_ecm.c          |   54 ++---
 drivers/usb/gadget/f_eem.c          |   36 +--
 drivers/usb/gadget/f_fs.c           |    3 +-
 drivers/usb/gadget/f_hid.c          |   22 +-
 drivers/usb/gadget/f_loopback.c     |   17 +-
 drivers/usb/gadget/f_mass_storage.c |   33 +--
 drivers/usb/gadget/f_ncm.c          |   58 ++---
 drivers/usb/gadget/f_obex.c         |   32 +--
 drivers/usb/gadget/f_phonet.c       |   17 +-
 drivers/usb/gadget/f_rndis.c        |   52 +---
 drivers/usb/gadget/f_serial.c       |   32 +--
 drivers/usb/gadget/f_sourcesink.c   |   14 +-
 drivers/usb/gadget/f_subset.c       |   33 +--
 drivers/usb/gadget/f_uvc.c          |    6 +-
 drivers/usb/gadget/file_storage.c   |    3 +-
 drivers/usb/gadget/gmidi.c          |    6 +-
 drivers/usb/gadget/inode.c          |    6 +-
 drivers/usb/gadget/printer.c        |   26 +-
 drivers/usb/gadget/u_ether.c        |   12 +-
 drivers/usb/gadget/u_ether.h        |    4 -
 drivers/usb/gadget/u_serial.c       |    4 +-
 drivers/usb/gadget/u_serial.h       |    2 -
 include/linux/usb/composite.h       |   55 +++-
 include/linux/usb/gadget.h          |   59 +++-
 32 files changed, 1245 insertions(+), 425 deletions(-)

-- 
1.7.3.3
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

             reply	other threads:[~2011-03-23  8:02 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-23  8:01 Tatyana Brokhman [this message]
     [not found] ` <1300867313-20751-1-git-send-email-tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2011-03-31 13:51   ` [PATCH v6 0/5] usb gadget: Add SuperSpeed support to the Gadget Framework Tanya Brokhman
2011-04-13 21:49     ` Greg KH
     [not found]       ` <20110413214958.GB8823-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2011-04-14 11:30         ` Felipe Balbi
     [not found]           ` <20110414113056.GI14319-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-04-14 12:03             ` Tanya Brokhman
2011-04-14 12:27               ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1300867313-20751-1-git-send-email-tlinder@codeaurora.org \
    --to=tlinder@codeaurora.org \
    --cc=ablay@codeaurora.org \
    --cc=balbi@ti.com \
    --cc=gregkh@suse.de \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).