From: Tatyana Brokhman <tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org
Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Tatyana Brokhman
<tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH v11 0/7] usb gadget: Add SuperSpeed support to the Gadget Framework
Date: Thu, 19 May 2011 14:43:25 +0300 [thread overview]
Message-ID: <1305805417-31750-1-git-send-email-tlinder@codeaurora.org> (raw)
It was tested in the following ways:
1. Dummy_hcd and g_zero gadget with our internally developed unittest.
(See bellow)
2. Our DCD (that is not ready for upstreaming yet but we're working on
it) and g_mass_storage gadget. With this setup we passed USBCV 2.0 and 3.0.
3. We developed a UAS gadget driver that is also working with this
implementation over our DCD and the UAS Linux host driver. Its operational
both in SS and in HS mode. Was released to the community in another patch series.
4. All of the other existing gadget drivers were minimally testes on
the dummy_hcd setup as well (successful enumeration).
The unittest framework that was used for testing can be downloaded from
git://codeaurora.org/quic/usb3/ut/.git
Please use the upstream branch.
See https://www.codeaurora.org/gitweb/quic/usb3/?p=ut/.git;a=summary for more
details.
Tatyana Brokhman (7):
usb: Add usb_endpoint_descriptor to be part of the struct usb_ep
usb: Configure endpoint according to gadget speed.
usb: Modify existing gadget drivers to use config_ep_by_speed()
instead of ep_choose.
usb:gadget: Add SuperSpeed support to the Gadget Framework
usb: Add streams support to the gadget framework
usb:dummy_hcd: use the shared_hcd infrustructure
usb: Adding SuperSpeed support to dummy_hcd
drivers/usb/gadget/Kconfig | 11 +
drivers/usb/gadget/composite.c | 341 ++++++++++++-
drivers/usb/gadget/config.c | 25 -
drivers/usb/gadget/dbgp.c | 8 +-
drivers/usb/gadget/dummy_hcd.c | 922 +++++++++++++++++++++++++----------
drivers/usb/gadget/epautoconf.c | 133 ++++-
drivers/usb/gadget/f_acm.c | 50 +--
drivers/usb/gadget/f_audio.c | 5 +-
drivers/usb/gadget/f_ecm.c | 54 +--
drivers/usb/gadget/f_eem.c | 36 +-
drivers/usb/gadget/f_fs.c | 3 +-
drivers/usb/gadget/f_hid.c | 22 +-
drivers/usb/gadget/f_loopback.c | 17 +-
drivers/usb/gadget/f_mass_storage.c | 33 +-
drivers/usb/gadget/f_ncm.c | 58 +--
drivers/usb/gadget/f_obex.c | 32 +-
drivers/usb/gadget/f_phonet.c | 17 +-
drivers/usb/gadget/f_rndis.c | 52 +--
drivers/usb/gadget/f_serial.c | 32 +-
drivers/usb/gadget/f_sourcesink.c | 14 +-
drivers/usb/gadget/f_subset.c | 33 +-
drivers/usb/gadget/f_uvc.c | 6 +-
drivers/usb/gadget/file_storage.c | 3 +-
drivers/usb/gadget/gmidi.c | 6 +-
drivers/usb/gadget/inode.c | 6 +-
drivers/usb/gadget/printer.c | 26 +-
drivers/usb/gadget/u_ether.c | 12 +-
drivers/usb/gadget/u_ether.h | 4 -
drivers/usb/gadget/u_serial.c | 4 +-
drivers/usb/gadget/u_serial.h | 2 -
include/linux/usb/ch9.h | 2 -
include/linux/usb/composite.h | 46 ++-
include/linux/usb/gadget.h | 69 ++-
33 files changed, 1399 insertions(+), 685 deletions(-)
--
1.7.3.3
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2011-05-19 11:43 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-19 11:43 Tatyana Brokhman [this message]
2011-05-19 11:43 ` [PATCH/RESEND v11 1/7] usb: Add usb_endpoint_descriptor to be part of the struct usb_ep Tatyana Brokhman
2011-05-19 11:43 ` [PATCH v11 2/7] usb: Configure endpoint according to gadget speed Tatyana Brokhman
2011-05-20 15:24 ` Sebastian Andrzej Siewior
2011-05-19 11:43 ` [PATCH/RESEND v11 3/7] usb: Modify existing gadget drivers to use config_ep_by_speed() instead of ep_choose Tatyana Brokhman
2011-05-19 11:43 ` [PATCH v11 4/7] usb:gadget: Add SuperSpeed support to the Gadget Framework Tatyana Brokhman
2011-05-20 16:49 ` Sebastian Andrzej Siewior
2011-05-22 7:20 ` Tanya Brokhman
2011-05-22 10:59 ` Sebastian Andrzej Siewior
2011-05-23 6:19 ` Felipe Balbi
2011-05-19 11:43 ` [PATCH/RESEND v11 5/7] usb: Add streams support to the gadget framework Tatyana Brokhman
2011-05-19 11:43 ` [PATCH v11 6/7] usb:dummy_hcd: use the shared_hcd infrustructure Tatyana Brokhman
2011-05-19 18:48 ` Alan Stern
2011-05-19 13:46 ` [PATCH v11 0/7] usb gadget: Add SuperSpeed support to the Gadget Framework Felipe Balbi
[not found] ` <1305805417-31750-1-git-send-email-tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2011-05-19 11:43 ` [PATCH v11 7/7] usb: Adding SuperSpeed support to dummy_hcd Tatyana Brokhman
2011-05-19 13:27 ` [PATCH v11 0/7] usb gadget: Add SuperSpeed support to the Gadget Framework Greg KH
2011-05-20 10:40 ` Felipe Balbi
2011-05-19 16:14 ` Felipe Balbi
2011-05-19 16:41 ` Greg KH
[not found] ` <20110519164112.GC27139-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2011-05-19 18:43 ` Tanya Brokhman
2011-05-19 18:50 ` Greg KH
[not found] ` <20110519185015.GA27546-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2011-05-19 18:55 ` Tanya Brokhman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305805417-31750-1-git-send-email-tlinder@codeaurora.org \
--to=tlinder-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).