From: Tatyana Brokhman <tlinder@codeaurora.org>
To: greg@kroah.com
Cc: linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org,
balbi@ti.com, ablay@codeaurora.org,
Tatyana Brokhman <tlinder@codeaurora.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH/RESEND v14 5/9] usb: coding style fix
Date: Tue, 31 May 2011 16:18:25 +0300 [thread overview]
Message-ID: <1306847914-19876-6-git-send-email-tlinder@codeaurora.org> (raw)
In-Reply-To: <1306847914-19876-1-git-send-email-tlinder@codeaurora.org>
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
---
drivers/usb/gadget/composite.c | 16 ++++++++++---
drivers/usb/gadget/dummy_hcd.c | 48 ++++++++++++++++++++++++++++++----------
2 files changed, 48 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 15e9bc9..897e4f5 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -495,10 +495,18 @@ static int set_config(struct usb_composite_dev *cdev,
INFO(cdev, "%s speed config #%d: %s\n",
({ char *speed;
switch (gadget->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
+ case USB_SPEED_LOW:
+ speed = "low";
+ break;
+ case USB_SPEED_FULL:
+ speed = "full";
+ break;
+ case USB_SPEED_HIGH:
+ speed = "high";
+ break;
+ default:
+ speed = "?";
+ break;
} ; speed; }), number, c ? c->label : "unconfigured");
if (!c)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 61ff9279..d92a660 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -425,10 +425,18 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
(desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
({ char *val;
switch (desc->bmAttributes & 0x03) {
- case USB_ENDPOINT_XFER_BULK: val = "bulk"; break;
- case USB_ENDPOINT_XFER_ISOC: val = "iso"; break;
- case USB_ENDPOINT_XFER_INT: val = "intr"; break;
- default: val = "ctrl"; break;
+ case USB_ENDPOINT_XFER_BULK:
+ val = "bulk";
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ val = "iso";
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ val = "intr";
+ break;
+ default:
+ val = "ctrl";
+ break;
}; val; }),
max);
@@ -1786,18 +1794,34 @@ show_urb (char *buf, size_t size, struct urb *urb)
urb,
({ char *s;
switch (urb->dev->speed) {
- case USB_SPEED_LOW: s = "ls"; break;
- case USB_SPEED_FULL: s = "fs"; break;
- case USB_SPEED_HIGH: s = "hs"; break;
- default: s = "?"; break;
+ case USB_SPEED_LOW:
+ s = "ls";
+ break;
+ case USB_SPEED_FULL:
+ s = "fs";
+ break;
+ case USB_SPEED_HIGH:
+ s = "hs";
+ break;
+ default:
+ s = "?";
+ break;
}; s; }),
ep, ep ? (usb_pipein (urb->pipe) ? "in" : "out") : "",
({ char *s; \
switch (usb_pipetype (urb->pipe)) { \
- case PIPE_CONTROL: s = ""; break; \
- case PIPE_BULK: s = "-bulk"; break; \
- case PIPE_INTERRUPT: s = "-int"; break; \
- default: s = "-iso"; break; \
+ case PIPE_CONTROL: \
+ s = ""; \
+ break; \
+ case PIPE_BULK: \
+ s = "-bulk"; \
+ break; \
+ case PIPE_INTERRUPT: \
+ s = "-int"; \
+ break; \
+ default: \
+ s = "-iso"; \
+ break; \
}; s;}),
urb->actual_length, urb->transfer_buffer_length);
}
--
1.7.3.3
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-05-31 13:18 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-31 13:18 [PATCH v14 0/9] usb gadget: Add SuperSpeed support to the Gadget Framework Tatyana Brokhman
2011-05-31 13:18 ` [PATCH/RESEND v14 1/9] usb: Add usb_endpoint_descriptor to be part of the struct usb_ep Tatyana Brokhman
2011-05-31 13:18 ` [PATCH/RESEND v14 2/9] usb: Configure endpoint according to gadget speed Tatyana Brokhman
2011-05-31 13:18 ` [PATCH/RESEND v14 3/9] usb: Modify existing gadget drivers to use config_ep_by_speed() instead of ep_choose Tatyana Brokhman
2011-05-31 13:18 ` [PATCH v14 4/9] usb: Add max_speed to usb_composite_driver structure Tatyana Brokhman
2011-06-06 11:17 ` Felipe Balbi
2011-06-06 11:33 ` Tanya Brokhman
2011-06-06 11:37 ` Felipe Balbi
[not found] ` <20110606113742.GY18731-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-06-06 15:25 ` Alan Stern
2011-06-06 15:36 ` Felipe Balbi
2011-05-31 13:18 ` Tatyana Brokhman [this message]
2011-05-31 13:18 ` [PATCH v14 6/9] usb: Add streams support to the gadget framework Tatyana Brokhman
2011-05-31 13:18 ` [PATCH v14 7/9] usb:gadget: Add SuperSpeed support to the Gadget Framework Tatyana Brokhman
2011-06-03 8:03 ` Felipe Balbi
[not found] ` <20110603080333.GS2409-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-06-03 18:00 ` Tanya Brokhman
2011-06-06 11:14 ` Felipe Balbi
2011-05-31 13:18 ` [PATCH/RESEND v14 8/9] usb:dummy_hcd: use the shared_hcd infrastructure Tatyana Brokhman
2011-05-31 13:18 ` [PATCH v14 9/9] usb: Adding SuperSpeed support to dummy_hcd Tatyana Brokhman
2011-05-31 14:18 ` Alan Stern
2011-05-31 18:39 ` Brokhman Tatyana
2011-05-31 19:07 ` Alan Stern
2011-05-31 19:29 ` Brokhman Tatyana
[not found] ` <Pine.LNX.4.44L0.1105311014160.30678-100000-pYrvlCTfrz9XsRXLowluHWD2FQJk+8+b@public.gmane.org>
2011-05-31 18:40 ` Brokhman Tatyana
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306847914-19876-6-git-send-email-tlinder@codeaurora.org \
--to=tlinder@codeaurora.org \
--cc=ablay@codeaurora.org \
--cc=balbi@ti.com \
--cc=greg@kroah.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).