Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Amit Blay <ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org
Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	balbi-l0cyMroinI0@public.gmane.org,
	tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	Amit Blay <ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [RFC/PATCH 1/3] usb: Add SuperSpeed support to g_zero gadget
Date: Sun,  3 Jul 2011 17:29:31 +0300	[thread overview]
Message-ID: <1309703373-22476-2-git-send-email-ablay@codeaurora.org> (raw)
In-Reply-To: <1309703373-22476-1-git-send-email-ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

This patch adds SuperSpeed descriptors to the g_zero gadget.
The SuperSpeed descriptors were added both for f_soursesink and f_loopback
configurations of the g_zero gadget.

Signed-off-by: Tatyana Brokhman <tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Signed-off-by: Amit Blay <ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

---
 drivers/usb/gadget/f_loopback.c   |   55 ++++++++++++++++++++++++++++++++++++-
 drivers/usb/gadget/f_sourcesink.c |   55 ++++++++++++++++++++++++++++++++++++-
 drivers/usb/gadget/zero.c         |    2 +-
 3 files changed, 109 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index 3756326..ca660d4 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -118,6 +118,49 @@ static struct usb_descriptor_header *hs_loopback_descs[] = {
 	NULL,
 };
 
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_loop_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+struct usb_ss_ep_comp_descriptor ss_loop_source_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_endpoint_descriptor ss_loop_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+struct usb_ss_ep_comp_descriptor ss_loop_sink_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_descriptor_header *ss_loopback_descs[] = {
+	(struct usb_descriptor_header *) &loopback_intf,
+	(struct usb_descriptor_header *) &ss_loop_source_desc,
+	(struct usb_descriptor_header *) &ss_loop_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_loop_sink_desc,
+	(struct usb_descriptor_header *) &ss_loop_sink_comp_desc,
+	NULL,
+};
+
 /* function-specific strings: */
 
 static struct usb_string strings_loopback[] = {
@@ -175,8 +218,18 @@ autoconf_fail:
 		f->hs_descriptors = hs_loopback_descs;
 	}
 
+	/* support super speed hardware */
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		ss_loop_source_desc.bEndpointAddress =
+				fs_loop_source_desc.bEndpointAddress;
+		ss_loop_sink_desc.bEndpointAddress =
+				fs_loop_sink_desc.bEndpointAddress;
+		f->ss_descriptors = ss_loopback_descs;
+	}
+
 	DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
-			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+	    (gadget_is_superspeed(c->cdev->gadget) ? "super" :
+	     (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")),
 			f->name, loop->in_ep->name, loop->out_ep->name);
 	return 0;
 }
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index caf2f95..5247f07 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -131,6 +131,49 @@ static struct usb_descriptor_header *hs_source_sink_descs[] = {
 	NULL,
 };
 
+/* super speed support: */
+
+static struct usb_endpoint_descriptor ss_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+struct usb_ss_ep_comp_descriptor ss_source_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_endpoint_descriptor ss_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+};
+
+struct usb_ss_ep_comp_descriptor ss_sink_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	0,
+};
+
+static struct usb_descriptor_header *ss_source_sink_descs[] = {
+	(struct usb_descriptor_header *) &source_sink_intf,
+	(struct usb_descriptor_header *) &ss_source_desc,
+	(struct usb_descriptor_header *) &ss_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_sink_desc,
+	(struct usb_descriptor_header *) &ss_sink_comp_desc,
+	NULL,
+};
+
 /* function-specific strings: */
 
 static struct usb_string strings_sourcesink[] = {
@@ -187,8 +230,18 @@ autoconf_fail:
 		f->hs_descriptors = hs_source_sink_descs;
 	}
 
+	/* support super speed hardware */
+	if (gadget_is_superspeed(c->cdev->gadget)) {
+		ss_source_desc.bEndpointAddress =
+				fs_source_desc.bEndpointAddress;
+		ss_sink_desc.bEndpointAddress =
+				fs_sink_desc.bEndpointAddress;
+		f->ss_descriptors = ss_source_sink_descs;
+	}
+
 	DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
-			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+	    (gadget_is_superspeed(c->cdev->gadget) ? "super" :
+	     (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")),
 			f->name, ss->in_ep->name, ss->out_ep->name);
 	return 0;
 }
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index af7e7c3..00e2fd2 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -340,7 +340,7 @@ static struct usb_composite_driver zero_driver = {
 	.name		= "zero",
 	.dev		= &device_desc,
 	.strings	= dev_strings,
-	.max_speed	= USB_SPEED_HIGH,
+	.max_speed	= USB_SPEED_SUPER,
 	.unbind		= zero_unbind,
 	.suspend	= zero_suspend,
 	.resume		= zero_resume,
-- 
1.7.3.3

--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2011-07-03 14:29 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-03 14:29 [PATCH 0/3] usb:gadget: Add SuperSpeed Function Power Management Amit Blay
     [not found] ` <1309703373-22476-1-git-send-email-ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2011-07-03 14:29   ` Amit Blay [this message]
     [not found]     ` <1309703373-22476-2-git-send-email-ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2011-07-08 10:58       ` [RFC/PATCH 1/3] usb: Add SuperSpeed support to g_zero gadget Felipe Balbi
2011-07-03 14:29 ` [RFC/PATCH 2/3] usb:gadget: Add SuperSpeed function power management Amit Blay
     [not found]   ` <1309703373-22476-3-git-send-email-ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2011-07-27 14:34     ` Felipe Balbi
2011-07-28 16:15       ` Amit Blay
2011-07-29  4:51         ` Felipe Balbi
     [not found]           ` <20110729045136.GA9069-UiBtZHVXSwEVvW8u9ZQWYwjfymiNCTlR@public.gmane.org>
2011-07-29  7:41             ` Amit Blay
2011-07-28 16:15       ` Amit Blay
2011-07-03 14:29 ` [RFC/PATCH 3/3] usb:gadget: SuperSpeed function power management testing support Amit Blay
     [not found]   ` <1309703373-22476-4-git-send-email-ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2011-07-27 14:37     ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1309703373-22476-2-git-send-email-ablay@codeaurora.org \
    --to=ablay-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=balbi-l0cyMroinI0@public.gmane.org \
    --cc=greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox