[PATCH 1/2] msm_serial_hs: Fix type inconsistency for tx and rx command_ptr_ptr

[PATCH 1/2] msm_serial_hs: Fix type inconsistency for tx and rx command_ptr_ptr

[Mayank Rana]

Both tx and rx command_ptr_ptr are of type u32*. While allocating
memory for it, sizeof(u32 *) is used as part of kmalloc API instead
of sizeof(u32). ADM Hardare requires size of command_ptr_ptr as 1 Word.
Both sizeof(u32 *) and sizeof(u32) are same on 32-bit architecture
whereas sizeof(u32 *) would be different in size compare to sizeof(u32)
on anyother architecture.

Hence correct usage of sizeof(command_ptr_ptr) for Tx and Rx with
kmalloc and dma_(map/unmap)_single APIs.

Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
---
 drivers/tty/serial/msm_serial_hs.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index 624701f..f1d5695 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -420,9 +420,9 @@ static int __devexit msm_hs_remove(struct platform_device *pdev)
 		      msm_uport->rx.rbuffer);
 	dma_pool_destroy(msm_uport->rx.pool);
 
-	dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32 *),
+	dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32),
 			 DMA_TO_DEVICE);
-	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32 *),
+	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32),
 			 DMA_TO_DEVICE);
 	dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box),
 			 DMA_TO_DEVICE);
@@ -810,7 +810,7 @@ static void msm_hs_submit_tx_locked(struct uart_port *uport)
 	*tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr);
 
 	dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr,
-				   sizeof(u32 *), DMA_TO_DEVICE);
+				   sizeof(u32), DMA_TO_DEVICE);
 
 	/* Save tx_count to use in Callback */
 	tx->tx_count = tx_count;
@@ -1535,7 +1535,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport)
 	if (!tx->command_ptr)
 		return -ENOMEM;
 
-	tx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+	tx->command_ptr_ptr = kmalloc(sizeof(u32), GFP_KERNEL | __GFP_DMA);
 	if (!tx->command_ptr_ptr) {
 		ret = -ENOMEM;
 		goto err_tx_command_ptr_ptr;
@@ -1545,7 +1545,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport)
 					    sizeof(dmov_box), DMA_TO_DEVICE);
 	tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev,
 						tx->command_ptr_ptr,
-						sizeof(u32 *), DMA_TO_DEVICE);
+						sizeof(u32), DMA_TO_DEVICE);
 	tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr);
 
 	init_waitqueue_head(&rx->wait);
@@ -1573,7 +1573,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport)
 		goto err_rx_command_ptr;
 	}
 
-	rx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA);
+	rx->command_ptr_ptr = kmalloc(sizeof(u32), GFP_KERNEL | __GFP_DMA);
 	if (!rx->command_ptr_ptr) {
 		pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__);
 		ret = -ENOMEM;
@@ -1591,7 +1591,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport)
 	*rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr);
 
 	rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr,
-					    sizeof(u32 *), DMA_TO_DEVICE);
+					    sizeof(u32), DMA_TO_DEVICE);
 	rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr);
 
 	INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work);
@@ -1607,7 +1607,7 @@ err_dma_pool_alloc:
 	dma_pool_destroy(msm_uport->rx.pool);
 err_dma_pool_create:
 	dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr,
-				sizeof(u32 *), DMA_TO_DEVICE);
+				sizeof(u32), DMA_TO_DEVICE);
 	dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr,
 				sizeof(dmov_box), DMA_TO_DEVICE);
 	kfree(msm_uport->tx.command_ptr_ptr);
-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

[PATCH 2/2] msm_serial_hs: Fix spinlock recursion in handling CTS

[Mayank Rana]

msm_hs_handle_delta_cts tries to acquire port->lock already acquired
by the callee function msm_hs_isr. Change function name to follow
"_locked" convention.

Signed-off-by: Mayank Rana <mrana@codeaurora.org>
---
 drivers/tty/serial/msm_serial_hs.c |    7 ++-----
 1 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index f1d5695..ec16037 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -1085,12 +1085,10 @@ static void msm_hs_config_port(struct uart_port *uport, int cfg_flags)
 }
 
 /*  Handle CTS changes (Called from interrupt handler) */
-static void msm_hs_handle_delta_cts(struct uart_port *uport)
+static void msm_hs_handle_delta_cts_locked(struct uart_port *uport)
 {
-	unsigned long flags;
 	struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport);
 
-	spin_lock_irqsave(&uport->lock, flags);
 	clk_enable(msm_uport->clk);
 
 	/* clear interrupt */
@@ -1098,7 +1096,6 @@ static void msm_hs_handle_delta_cts(struct uart_port *uport)
 	uport->icount.cts++;
 
 	clk_disable(msm_uport->clk);
-	spin_unlock_irqrestore(&uport->lock, flags);
 
 	/* clear the IOCTL TIOCMIWAIT if called */
 	wake_up_interruptible(&uport->state->port.delta_msr_wait);
@@ -1246,7 +1243,7 @@ static irqreturn_t msm_hs_isr(int irq, void *dev)
 
 	/* Change in CTS interrupt */
 	if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK)
-		msm_hs_handle_delta_cts(uport);
+		msm_hs_handle_delta_cts_locked(uport);
 
 	spin_unlock_irqrestore(&uport->lock, flags);
 
-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.