Re: [PATCH v4 01/15] usb: phy: msm: Move mach dependent code to platform data

["Ivan T. Ivanov" <iivanov@mm-sol.com>]

Hi Christopher,

On Tue, 2013-11-12 at 13:27 -0500, Christopher Covington wrote:
> Hi Ivan,
> 
> On 11/12/2013 09:51 AM, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
> > 
> > This patch fix compilation error when driver is compiled
> > in multi-platform builds.
> > 
> > drivers/built-in.o: In function `msm_otg_link_clk_reset':
> > ./drivers/usb/phy/phy-msm-usb.c:314: undefined reference to `clk_reset'
> > ./drivers/usb/phy/phy-msm-usb.c:318: undefined reference to `clk_reset'
> > 
> > Use platform data supplied reset handlers and adjust error
> > messages reported when reset sequence fail.
> > 
> > This is an intermediate step before adding support for reset
> > framework and newer targets.
> > 
> > Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
> > Acked-by: David Brown <davidb@codeaurora.org>
> > Cc: Daniel Walker <dwalker@fifo99.com>
> > Cc: Felipe Balbi <balbi@ti.com>
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > ---
> >  arch/arm/mach-msm/board-msm7x30.c |   35 +++++++++++++++++++++++++++++++++++
> >  arch/arm/mach-msm/board-qsd8x50.c |   35 +++++++++++++++++++++++++++++++++++
> >  drivers/usb/phy/phy-msm-usb.c     |   35 +++++++++++++++--------------------
> >  include/linux/usb/msm_hsusb.h     |    3 +++
> >  4 files changed, 88 insertions(+), 20 deletions(-)
> > 
> > diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
> > index f9af5a4..46de789 100644
> > --- a/arch/arm/mach-msm/board-msm7x30.c
> > +++ b/arch/arm/mach-msm/board-msm7x30.c
> > @@ -30,6 +30,7 @@
> >  #include <asm/memory.h>
> >  #include <asm/setup.h>
> >  
> > +#include <mach/clk.h>
> >  #include <mach/msm_iomap.h>
> >  #include <mach/dma.h>
> >  
> > @@ -60,10 +61,44 @@ static int hsusb_phy_init_seq[] = {
> >  	-1
> >  };
> >  
> > +static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
> > +{
> > +	int ret;
> > +
> > +	if (assert) {
> > +		ret = clk_reset(link_clk, CLK_RESET_ASSERT);
> > +		if (ret)
> > +			pr_err("usb hs_clk assert failed\n");
> > +	} else {
> > +		ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
> > +		if (ret)
> > +			pr_err("usb hs_clk deassert failed\n");
> > +	}
> > +	return ret;
> > +}
> > +
> > +static int hsusb_phy_clk_reset(struct clk *phy_clk)
> > +{
> > +	int ret;
> > +
> > +	ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
> > +	if (ret) {
> > +		pr_err("usb phy clk assert failed\n");
> > +		return ret;
> > +	}
> > +	usleep_range(10000, 12000);
> > +	ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
> > +	if (ret)
> > +		pr_err("usb phy clk deassert failed\n");
> > +	return ret;
> > +}
> > +
> >  static struct msm_otg_platform_data msm_otg_pdata = {
> >  	.phy_init_seq		= hsusb_phy_init_seq,
> >  	.mode                   = USB_PERIPHERAL,
> >  	.otg_control		= OTG_PHY_CONTROL,
> > +	.link_clk_reset		= hsusb_link_clk_reset,
> > +	.phy_clk_reset		= hsusb_phy_clk_reset,
> >  };
> >  
> >  struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
> > diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
> > index 5f933bc..9169ec3 100644
> > --- a/arch/arm/mach-msm/board-qsd8x50.c
> > +++ b/arch/arm/mach-msm/board-qsd8x50.c
> > @@ -31,6 +31,7 @@
> >  #include <mach/irqs.h>
> >  #include <mach/sirc.h>
> >  #include <mach/vreg.h>
> > +#include <mach/clk.h>
> >  #include <linux/platform_data/mmc-msm_sdcc.h>
> >  
> >  #include "devices.h"
> > @@ -81,10 +82,44 @@ static int hsusb_phy_init_seq[] = {
> >  	-1
> >  };
> >  
> > +static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
> > +{
> > +	int ret;
> > +
> > +	if (assert) {
> > +		ret = clk_reset(link_clk, CLK_RESET_ASSERT);
> > +		if (ret)
> > +			pr_err("usb hs_clk assert failed\n");
> > +	} else {
> > +		ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
> > +		if (ret)
> > +			pr_err("usb hs_clk deassert failed\n");
> > +	}
> > +	return ret;
> > +}
> > +
> > +static int hsusb_phy_clk_reset(struct clk *phy_clk)
> > +{
> > +	int ret;
> > +
> > +	ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
> > +	if (ret) {
> > +		pr_err("usb phy clk assert failed\n");
> > +		return ret;
> > +	}
> > +	usleep_range(10000, 12000);
> > +	ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
> > +	if (ret)
> > +		pr_err("usb phy clk deassert failed\n");
> > +	return ret;
> > +}
> 
> Why are there identical, static definitions of hsusb_link_clk_reset and
> hsusb_phy_clk_reset across the two board files? Why not share a single
> non-static set of definitions?

One file which is used by both boards and is compiled unconditionally 
is clock.c, but I don't think that it will be appropriate to put USB
specific functions there. Creating new file for just these functions
also do not sound good to me.

Regards,
Ivan

> 
> Thanks,
> Christopher
>