From: Stephen Boyd <sboyd@codeaurora.org>
To: arm@kernel.org
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
David Brown <davidb@codeaurora.org>,
Daniel Walker <dwalker@fifo99.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH v2 1/7] usb: phy: msm: Move mach dependent code to platform data
Date: Mon, 30 Dec 2013 13:15:27 -0800 [thread overview]
Message-ID: <1388438133-431-2-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1388438133-431-1-git-send-email-sboyd@codeaurora.org>
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
This patch fix compilation error when driver is compiled
in multi-platform builds.
drivers/built-in.o: In function `msm_otg_link_clk_reset':
./drivers/usb/phy/phy-msm-usb.c:314: undefined reference to `clk_reset'
./drivers/usb/phy/phy-msm-usb.c:318: undefined reference to `clk_reset'
Use platform data supplied reset handlers and adjust error
messages reported when reset sequence fail.
This is an intermediate step before adding support for reset
framework and newer targets.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/mach-msm/board-msm7x30.c | 35 +++++++++++++++++++++++++++++++++++
arch/arm/mach-msm/board-qsd8x50.c | 35 +++++++++++++++++++++++++++++++++++
drivers/usb/phy/phy-msm-usb.c | 35 +++++++++++++++--------------------
include/linux/usb/msm_hsusb.h | 3 +++
4 files changed, 88 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index f9af5a4..46de789 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -30,6 +30,7 @@
#include <asm/memory.h>
#include <asm/setup.h>
+#include <mach/clk.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
@@ -60,10 +61,44 @@ static int hsusb_phy_init_seq[] = {
-1
};
+static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
+{
+ int ret;
+
+ if (assert) {
+ ret = clk_reset(link_clk, CLK_RESET_ASSERT);
+ if (ret)
+ pr_err("usb hs_clk assert failed\n");
+ } else {
+ ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb hs_clk deassert failed\n");
+ }
+ return ret;
+}
+
+static int hsusb_phy_clk_reset(struct clk *phy_clk)
+{
+ int ret;
+
+ ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
+ if (ret) {
+ pr_err("usb phy clk assert failed\n");
+ return ret;
+ }
+ usleep_range(10000, 12000);
+ ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb phy clk deassert failed\n");
+ return ret;
+}
+
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
+ .link_clk_reset = hsusb_link_clk_reset,
+ .phy_clk_reset = hsusb_phy_clk_reset,
};
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 5f933bc..9169ec3 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -31,6 +31,7 @@
#include <mach/irqs.h>
#include <mach/sirc.h>
#include <mach/vreg.h>
+#include <mach/clk.h>
#include <linux/platform_data/mmc-msm_sdcc.h>
#include "devices.h"
@@ -81,10 +82,44 @@ static int hsusb_phy_init_seq[] = {
-1
};
+static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
+{
+ int ret;
+
+ if (assert) {
+ ret = clk_reset(link_clk, CLK_RESET_ASSERT);
+ if (ret)
+ pr_err("usb hs_clk assert failed\n");
+ } else {
+ ret = clk_reset(link_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb hs_clk deassert failed\n");
+ }
+ return ret;
+}
+
+static int hsusb_phy_clk_reset(struct clk *phy_clk)
+{
+ int ret;
+
+ ret = clk_reset(phy_clk, CLK_RESET_ASSERT);
+ if (ret) {
+ pr_err("usb phy clk assert failed\n");
+ return ret;
+ }
+ usleep_range(10000, 12000);
+ ret = clk_reset(phy_clk, CLK_RESET_DEASSERT);
+ if (ret)
+ pr_err("usb phy clk deassert failed\n");
+ return ret;
+}
+
static struct msm_otg_platform_data msm_otg_pdata = {
.phy_init_seq = hsusb_phy_init_seq,
.mode = USB_PERIPHERAL,
.otg_control = OTG_PHY_CONTROL,
+ .link_clk_reset = hsusb_link_clk_reset,
+ .phy_clk_reset = hsusb_phy_clk_reset,
};
static struct platform_device *devices[] __initdata = {
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index e9d4cd9..9a47d44 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -40,8 +40,6 @@
#include <linux/usb/msm_hsusb_hw.h>
#include <linux/regulator/consumer.h>
-#include <mach/clk.h>
-
#define MSM_USB_BASE (motg->regs)
#define DRIVER_NAME "msm_otg"
@@ -308,33 +306,30 @@ static void ulpi_init(struct msm_otg *motg)
static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
{
- int ret;
+ int ret = 0;
+
+ if (!motg->pdata->link_clk_reset)
+ return ret;
+
+ ret = motg->pdata->link_clk_reset(motg->clk, assert);
+ if (ret)
+ dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
+ assert ? "assert" : "deassert");
- if (assert) {
- ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
- if (ret)
- dev_err(motg->phy.dev, "usb hs_clk assert failed\n");
- } else {
- ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
- if (ret)
- dev_err(motg->phy.dev, "usb hs_clk deassert failed\n");
- }
return ret;
}
static int msm_otg_phy_clk_reset(struct msm_otg *motg)
{
- int ret;
+ int ret = 0;
- ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
- if (ret) {
- dev_err(motg->phy.dev, "usb phy clk assert failed\n");
+ if (!motg->pdata->phy_clk_reset)
return ret;
- }
- usleep_range(10000, 12000);
- ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
+
+ ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
if (ret)
- dev_err(motg->phy.dev, "usb phy clk deassert failed\n");
+ dev_err(motg->phy.dev, "usb phy clk reset failed\n");
+
return ret;
}
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 22a396c..3275483 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -20,6 +20,7 @@
#include <linux/types.h>
#include <linux/usb/otg.h>
+#include <linux/clk.h>
/**
* Supported USB modes
@@ -135,6 +136,8 @@ struct msm_otg_platform_data {
enum msm_usb_phy_type phy_type;
void (*setup_gpio)(enum usb_otg_state state);
char *pclk_src_name;
+ int (*link_clk_reset)(struct clk *link_clk, bool assert);
+ int (*phy_clk_reset)(struct clk *phy_clk);
};
/**
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2013-12-30 21:15 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-30 21:15 [PATCH v2 0/7] Allow MSM DT platforms to be built multi-platform Stephen Boyd
2013-12-30 21:15 ` Stephen Boyd [this message]
2013-12-30 21:15 ` [PATCH v2 2/7] mmc: msm_sdcc: Limit driver to platforms that use it Stephen Boyd
2013-12-30 21:15 ` [PATCH v2 3/7] tty: serial: Limit msm_serial_hs " Stephen Boyd
2014-01-02 18:10 ` Arnd Bergmann
2014-01-02 20:20 ` Stephen Boyd
2014-01-02 20:26 ` Arnd Bergmann
2013-12-30 21:15 ` [PATCH v2 4/7] ARM: msm: Only build clock.c on proc_comm based platforms Stephen Boyd
2013-12-30 21:15 ` [PATCH v2 5/7] ARM: msm: Only build timer.c if required Stephen Boyd
2013-12-30 21:15 ` [PATCH v2 6/7] drm/msm: Drop unnecessary mach include Stephen Boyd
2013-12-30 21:20 ` Stephen Boyd
2013-12-31 1:12 ` Rob Clark
2013-12-31 1:19 ` Rob Clark
2013-12-31 5:15 ` Stephen Boyd
2014-01-09 8:13 ` Olof Johansson
2014-01-09 18:40 ` Stephen Boyd
2013-12-30 21:15 ` [PATCH v2 7/7] ARM: msm: Move MSM's DT based hardware to multi-platform support Stephen Boyd
2013-12-30 21:17 ` [PATCH v2 0/7] Allow MSM DT platforms to be built multi-platform Stephen Boyd
2014-01-02 18:13 ` Arnd Bergmann
2014-01-03 18:51 ` Stephen Boyd
2014-01-03 19:31 ` Olof Johansson
2014-01-09 8:11 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1388438133-431-2-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=arm@kernel.org \
--cc=davidb@codeaurora.org \
--cc=dwalker@fifo99.com \
--cc=gregkh@linuxfoundation.org \
--cc=iivanov@mm-sol.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).