From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Boyd Subject: [PATCH 0/2] Enable clock controllers on MSM Date: Thu, 16 Jan 2014 17:25:02 -0800 Message-ID: <1389921904-3777-1-git-send-email-sboyd@codeaurora.org> Return-path: Received: from smtp.codeaurora.org ([198.145.11.231]:43101 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751310AbaAQBZN (ORCPT ); Thu, 16 Jan 2014 20:25:13 -0500 Sender: linux-arm-msm-owner@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org To: arm@kernel.org Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Mike Turquette These patches add the clock controller nodes, enable the clock drivers on MSM based platforms, and hook it up enough to get the serial console working. This is based on the merge of Mike's clk-next branch with linux-next-20140116. The changes need the clk-next branch because that's where the DTS include files landed. Perhaps this can be applied after 3.14-rc1 is out? Stephen Boyd (2): ARM: dts: msm: Add clock controller nodes and hook into uart ARM: msm_defconfig: Enable MSM clock drivers arch/arm/boot/dts/qcom-msm8660-surf.dts | 11 +++++++++++ arch/arm/boot/dts/qcom-msm8960-cdp.dts | 18 ++++++++++++++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 24 ++++++++++++++++++++++++ arch/arm/configs/msm_defconfig | 4 ++++ 4 files changed, 57 insertions(+) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation