From: Stephen Boyd <sboyd@codeaurora.org>
To: David Brown <davidb@codeaurora.org>, Kumar Gala <galak@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: msm: Add 8058 PMIC to ssbi bus
Date: Tue, 8 Apr 2014 18:25:52 -0700 [thread overview]
Message-ID: <1397006752-19494-2-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1397006752-19494-1-git-send-email-sboyd@codeaurora.org>
Add the PMIC and the sub-devices that are currently supported in
the kernel to the DT.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/boot/dts/qcom-msm8660-surf.dts | 30 +++++++++++++++++++++++
arch/arm/boot/dts/qcom-msm8660.dtsi | 42 +++++++++++++++++++++++++++++++++
2 files changed, 72 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 169bad90dac9..a27eedff62d3 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -1,6 +1,36 @@
+#include <dt-bindings/input/input.h>
+
#include "qcom-msm8660.dtsi"
/ {
model = "Qualcomm MSM8660 SURF";
compatible = "qcom,msm8660-surf", "qcom,msm8660";
};
+
+&pmicintc {
+ keypad@148 {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_FN_F1)
+ MATRIX_KEY(0, 1, KEY_UP)
+ MATRIX_KEY(0, 2, KEY_LEFT)
+ MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+ MATRIX_KEY(1, 0, KEY_FN_F2)
+ MATRIX_KEY(1, 1, KEY_RIGHT)
+ MATRIX_KEY(1, 2, KEY_DOWN)
+ MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+ MATRIX_KEY(2, 3, KEY_ENTER)
+ MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(4, 1, KEY_UP)
+ MATRIX_KEY(4, 2, KEY_LEFT)
+ MATRIX_KEY(4, 3, KEY_HOME)
+ MATRIX_KEY(4, 4, KEY_FN_F3)
+ MATRIX_KEY(5, 0, KEY_CAMERA)
+ MATRIX_KEY(5, 1, KEY_RIGHT)
+ MATRIX_KEY(5, 2, KEY_DOWN)
+ MATRIX_KEY(5, 3, KEY_BACK)
+ MATRIX_KEY(5, 4, KEY_MENU)
+ >;
+ keypad,num-rows = <6>;
+ keypad,num-columns = <5>;
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index c52a9e964a44..985b4c16976a 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -83,5 +83,47 @@
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
+
+ pmicintc: pmic@0 {
+ compatible = "qcom,pm8058";
+ interrupt-parent = <&msmgpio>;
+ interrupts = <88 8>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8058-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <50 1>, <51 1>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ keypad@148 {
+ compatible = "qcom,pm8058-keypad";
+ reg = <0x148>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <74 1>, <75 1>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8058-rtc";
+ interrupt-parent = <&pmicintc>;
+ interrupts = <39 1>;
+ reg = <0x11d>;
+ allow-set-time;
+ };
+
+ vibrator@4a {
+ compatible = "qcom,pm8058-vib";
+ reg = <0x4a>;
+ };
+ };
};
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
prev parent reply other threads:[~2014-04-09 1:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-09 1:25 [PATCH 1/2] ARM: dts: msm: Add 8921 PMIC to ssbi bus Stephen Boyd
2014-04-09 1:25 ` Stephen Boyd [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397006752-19494-2-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=galak@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).