[PATCH v2] usb: phy: msm: Make phy_reset clk and reset line optional.

[Srinivas Kandagatla <srinivas.kandagatla@linaro.org>]

This patch makes the phy reset clk and reset line optional as this clk
is not available on boards like IFC6410 with APQ8064.

phy-reset clk is only used as argument to the mach level callbacks, so
this patch adds condition before clk_get calls so that the driver
wouldn't fail on SOCs which do not have this support.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
Hi Felipe,

With this new patch now the error message is only printed if the SOC actually supports
the phy reset clk, for SOCs like APQ8064 where there is no phy reset clock or
the callback which takes it there is no point in doing a clk_get call in the first place.


Thanks,
srini




 drivers/usb/phy/phy-msm-usb.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index c929370..aa8e2b9 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -279,11 +279,11 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
 
 static int msm_otg_phy_clk_reset(struct msm_otg *motg)
 {
-	int ret;
+	int ret = 0;
 
 	if (motg->pdata->phy_clk_reset)
 		ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
-	else
+	else if (motg->phy_rst)
 		ret = reset_control_reset(motg->phy_rst);
 
 	if (ret)
@@ -1466,7 +1466,7 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
 
 	motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy");
 	if (IS_ERR(motg->phy_rst))
-		return PTR_ERR(motg->phy_rst);
+		motg->phy_rst = NULL;
 
 	pdata->mode = of_usb_get_dr_mode(node);
 	if (pdata->mode == USB_DR_MODE_UNKNOWN)
@@ -1554,11 +1554,14 @@ static int msm_otg_probe(struct platform_device *pdev)
 	phy = &motg->phy;
 	phy->dev = &pdev->dev;
 
-	motg->phy_reset_clk = devm_clk_get(&pdev->dev,
+	if (motg->pdata->phy_clk_reset) {
+		motg->phy_reset_clk = devm_clk_get(&pdev->dev,
 					   np ? "phy" : "usb_phy_clk");
-	if (IS_ERR(motg->phy_reset_clk)) {
-		dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
-		return PTR_ERR(motg->phy_reset_clk);
+
+		if (IS_ERR(motg->phy_reset_clk)) {
+			dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
+			return PTR_ERR(motg->phy_reset_clk);
+		}
 	}
 
 	motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
-- 
1.9.1