From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Viresh Kumar <viresh.kumar@linaro.org>
Subject: [PATCH v2 05/15] clk: Add safe switch hook
Date: Fri, 5 Sep 2014 15:47:25 -0700 [thread overview]
Message-ID: <1409957256-23729-7-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1409957256-23729-1-git-send-email-sboyd@codeaurora.org>
Sometimes clocks can't accept their parent source turning off
while the source is reprogrammed to a different rate. Most
notably some CPU clocks require a way to switch away from the
current PLL they're running on, reprogram that PLL to a new rate,
and then switch back to the PLL with the new rate once they're
done. Add a hook that drivers can implement allowing them to
return a 'safe parent' that they can switch their parent to while
the upstream source is reprogrammed.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/clk.c | 53 ++++++++++++++++++++++++++++++++++++++------
include/linux/clk-private.h | 2 ++
include/linux/clk-provider.h | 1 +
3 files changed, 49 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 255ec8c92919..b23e2b9c9102 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1368,6 +1368,7 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate,
struct clk *new_parent, u8 p_index)
{
struct clk *child;
+ struct clk *parent;
clk->new_rate = new_rate;
clk->new_parent = new_parent;
@@ -1377,6 +1378,17 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate,
if (new_parent && new_parent != clk->parent)
new_parent->new_child = clk;
+ if (clk->ops->get_safe_parent) {
+ parent = clk->ops->get_safe_parent(clk->hw);
+ if (parent) {
+ p_index = clk_fetch_parent_index(clk, parent);
+ clk->safe_parent_index = p_index;
+ clk->safe_parent = parent;
+ }
+ } else {
+ clk->safe_parent = NULL;
+ }
+
hlist_for_each_entry(child, &clk->children, child_node) {
child->new_rate = clk_recalc(child, new_rate);
clk_calc_subtree(child, child->new_rate, NULL, 0);
@@ -1459,14 +1471,42 @@ out:
static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long event)
{
struct clk *child, *tmp_clk, *fail_clk = NULL;
+ struct clk *old_parent;
int ret = NOTIFY_DONE;
- if (clk->rate == clk->new_rate)
+ if (clk->rate == clk->new_rate && event != POST_RATE_CHANGE)
return NULL;
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ if (clk->safe_parent)
+ clk->ops->set_parent(clk->hw, clk->safe_parent_index);
+ break;
+ case POST_RATE_CHANGE:
+ if (clk->safe_parent) {
+ old_parent = __clk_set_parent_before(clk,
+ clk->new_parent);
+ if (clk->ops->set_rate_and_parent) {
+ clk->ops->set_rate_and_parent(clk->hw,
+ clk->new_rate,
+ clk->new_parent ?
+ clk->new_parent->rate : 0,
+ clk->new_parent_index);
+ } else if (clk->ops->set_parent) {
+ clk->ops->set_parent(clk->hw,
+ clk->new_parent_index);
+ }
+ __clk_set_parent_after(clk, clk->new_parent,
+ old_parent);
+ }
+ break;
+ }
+
if (clk->notifier_count) {
- ret = __clk_notify(clk, event, clk->rate, clk->new_rate);
- if (ret & NOTIFY_STOP_MASK)
+ if (event != POST_RATE_CHANGE)
+ ret = __clk_notify(clk, event, clk->rate,
+ clk->new_rate);
+ if (ret & NOTIFY_STOP_MASK && event != POST_RATE_CHANGE)
fail_clk = clk;
}
@@ -1508,7 +1548,8 @@ static void clk_change_rate(struct clk *clk)
else if (clk->parent)
best_parent_rate = clk->parent->rate;
- if (clk->new_parent && clk->new_parent != clk->parent) {
+ if (clk->new_parent && clk->new_parent != clk->parent &&
+ !clk->safe_parent) {
old_parent = __clk_set_parent_before(clk, clk->new_parent);
if (clk->ops->set_rate_and_parent) {
@@ -1528,9 +1569,6 @@ static void clk_change_rate(struct clk *clk)
clk->rate = clk_recalc(clk, best_parent_rate);
- if (clk->notifier_count && old_rate != clk->rate)
- __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
-
hlist_for_each_entry(child, &clk->children, child_node) {
/* Skip children who will be reparented to another clock */
if (child->new_parent && child->new_parent != clk)
@@ -1604,6 +1642,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
/* change the rates */
clk_change_rate(top);
+ clk_propagate_rate_change(top, POST_RATE_CHANGE);
out:
clk_prepare_unlock();
diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
index efbf70b9fd84..f48684af4d8f 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -38,8 +38,10 @@ struct clk {
struct clk **parents;
u8 num_parents;
u8 new_parent_index;
+ u8 safe_parent_index;
unsigned long rate;
unsigned long new_rate;
+ struct clk *safe_parent;
struct clk *new_parent;
struct clk *new_child;
unsigned long flags;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 32d39613d217..6dec0b306336 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -170,6 +170,7 @@ struct clk_ops {
struct clk **best_parent_clk);
int (*set_parent)(struct clk_hw *hw, u8 index);
u8 (*get_parent)(struct clk_hw *hw);
+ struct clk *(*get_safe_parent)(struct clk_hw *hw);
int (*set_rate)(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
int (*set_rate_and_parent)(struct clk_hw *hw,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2014-09-05 22:47 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-05 22:47 [PATCH v2 00/15] Krait clocks + Krait CPUfreq Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 01/15] clk: mux: Add unregistration API Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 02/15] clk: mux: Split out register accessors for reuse Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 03/15] clk: Add __clk_mux_determine_rate_closest Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 04/15] clk: divider: Make generic for usage elsewhere Stephen Boyd
2014-10-03 18:07 ` Stephen Boyd
2014-10-07 17:27 ` Srinivas Kandagatla
2014-10-07 18:26 ` Stephen Boyd
2014-10-07 19:28 ` Srinivas Kandagatla
2014-10-08 15:04 ` Srinivas Kandagatla
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47 ` Stephen Boyd [this message]
2014-09-05 22:47 ` [PATCH v2 06/15] clk: Avoid sending high rates to downstream clocks during set_rate Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 07/15] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 08/15] clk: qcom: Add HFPLL driver Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 09/15] clk: qcom: Add MSM8960/APQ8064's HFPLLs Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 10/15] clk: qcom: Add IPQ806X's HFPLLs Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 11/15] clk: qcom: Add support for Krait clocks Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 12/15] clk: qcom: Add KPSS ACC/GCC driver Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 13/15] clk: qcom: Add Krait clock controller driver Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 14/15] cpufreq: Add module to register cpufreq on Krait CPUs Stephen Boyd
2014-09-08 4:46 ` Viresh Kumar
2014-09-08 17:15 ` Christopher Covington
2014-09-09 0:37 ` Stephen Boyd
2014-09-09 4:53 ` Viresh Kumar
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 15/15] ARM: dts: qcom: Add necessary DT data for Krait cpufreq Stephen Boyd
2014-09-08 9:42 ` [PATCH v2 00/15] Krait clocks + Krait CPUfreq Pramod Gurav
2014-09-08 11:59 ` Pramod Gurav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409957256-23729-7-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).