From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Boyd Subject: [PATCH] ARM: debug: Update MSM and QCOM DEBUG_LL help Date: Fri, 5 Sep 2014 15:51:56 -0700 Message-ID: <1409957516-25616-1-git-send-email-sboyd@codeaurora.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Kumar Gala Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: linux-arm-msm@vger.kernel.org Add another SoC address for apq8064 and use DEBUG_UART_VIRT instead of DEBUG_UART_BASE because the former actually exists. Signed-off-by: Stephen Boyd --- arch/arm/Kconfig.debug | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 537dd04209bc..a71558ecf9da 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -378,7 +378,7 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port on MSM devices. - ARCH DEBUG_UART_PHYS DEBUG_UART_BASE # + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT # MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 @@ -397,7 +397,8 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port on Qualcomm devices. - ARCH DEBUG_UART_PHYS DEBUG_UART_BASE + ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT + APQ8064 0x16640000 0xf0040000 APQ8084 0xf995e000 0xfa75e000 MSM8X60 0x19c40000 0xf0040000 MSM8960 0x16440000 0xf0040000 -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation