From: Dolev Raviv <draviv@codeaurora.org>
To: James.Bottomley@HansenPartnership.com, hch@infradead.org
Cc: linux-scsi@vger.kernel.org, linux-scsi-owner@vger.kernel.org,
linux-arm-msm@vger.kernel.org, santoshsy@gmail.com,
Dolev Raviv <draviv@codeaurora.org>
Subject: [PATCH/RESEND V6 00/18] UFS: Power management support
Date: Thu, 25 Sep 2014 15:32:18 +0300 [thread overview]
Message-ID: <1411648356-3883-1-git-send-email-draviv@codeaurora.org> (raw)
This patch seies introduces support for power management in the driver as well as vendor specific initialization - registers, clocks, voltage regulators etc.
It includes also a rework for the init sequence and other PM pre-requisite such as write protection support, handling well-known LUN, error handling (retries), bkops, START_STOP unit command, and ICC levels settings.
--
Changes from V5:
- Add a print to "[01/18] scsi: fixing the "type" for well known LUs"
indicating on the type change.
- Moved "sdev->is_visible" test to scsi_sysfs_add_devices
- Reverted the squashed between
"[10/17] scsi: ufs: introduce well known logical unit in ufs" and
"[09/17] scsi: ufs: manually add well known logical"
and addressed othe comments by Chris.
- Fixed a bug and comments reported by Akinobu Mita <akinobu.mita@gmail.com>
Changes from V4:
- Restored "[01/16] scsi: support well known logical units" to fix type issue"
and renamed "[01/17] scsi: fixing the "type" for well known LUs"
- Add "[02/17] scsi: sysfs: don't add scsi_device if its already added"
to help addressing Chris comments.
- Squashed "[10/17] scsi: ufs: introduce well known logical unit in ufs" and
"[09/17] scsi: ufs: manually add well known logical" and addressed most of
Chris comments here.
- Cleanup in "[11/16] scsi: ufs: add UFS power management support" to align
it with comments made on previous patches.
Changes from V3:
- Replaced "[01/16] scsi: support well known logical units" with
"[09/17] scsi: ufs: manually add well known logical
- add patch "[PATCH V4 05/17] scsi: ufs: add voting support for host"
- Fix couple of compilation issues introduced in V3
- Add a NULL pointer test to hba->vops before accessing it
- Changed disable/enable irq with request/free irq
Changes from V2:
- Reordered scsi core patches
- add patch "[PATCH V3 02/16] scsi: balance out autopm get/put calls in"
- Minor changes/fixes to the patches:
* "[PATCH V3 10/16] scsi: ufs: add UFS power management support"
* "[PATCH V3 12/16] scsi: ufs: Add support for clock gating"
* "[PATCH V3 16/16] scsi: ufs: definitions for phy interface"
In order to address community concerns, and as a result of further
development and testing.
Changes from V1:
- 6 new patches apended at the end
- Allow overriding power configuration with controller support and
preferences/capabilities <Dolev Raviv>
- Allow overriding power choice with controller capabilities <Dolev Raviv>
- Add support for clock gating and clock scaling <Sahitya Tummala>
- Add capability to control the auto bkops during suspend <Subhash Jadavani>
- Add misc changes for phy/unipro driver usage <Dolev Raviv>
Dolev Raviv (2):
scsi: ufs: refactor configuring power mode
scsi: ufs: definitions for phy interface
Raviv Shvili (1):
scsi: ufs: add voting support for host controller power
Sahitya Tummala (3):
scsi: ufs: Add support for clock gating
scsi: ufs: Add freq-table-hz property for UFS device
scsi: ufs: Add support for clock scaling using devfreq framework
Subhash Jadavani (7):
scsi: fixing the "type" for well known LUs
scsi: sysfs: don't add scsi_device if its already added
scsi: ufs: refactor query descriptor API support
scsi: ufs: manually add well known logical units
scsi: ufs: introduce well known logical unit in ufs
scsi: ufs: add UFS power management support
scsi: ufs: tune bkops while power managment events
Sujit Reddy Thumma (4):
scsi: ufs: Allow vendor specific initialization
scsi: ufs: Add regulator enable support
scsi: ufs: Add clock initialization support
scsi: ufs: improve init sequence
Yaniv Gardi (1):
scsi: ufs: Active Power Mode - configuring bActiveICCLevel
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 41 +
drivers/scsi/scsi_scan.c | 16 +
drivers/scsi/ufs/Kconfig | 2 +
drivers/scsi/ufs/ufs.h | 132 +-
drivers/scsi/ufs/ufshcd-pci.c | 55 +-
drivers/scsi/ufs/ufshcd-pltfrm.c | 291 ++-
drivers/scsi/ufs/ufshcd.c | 2592 ++++++++++++++++++--
drivers/scsi/ufs/ufshcd.h | 280 ++-
drivers/scsi/ufs/ufshci.h | 9 +-
drivers/scsi/ufs/unipro.h | 56 +
include/scsi/scsi.h | 1 +
11 files changed, 3150 insertions(+), 325 deletions(-)
--
1.8.5.2
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2014-09-25 12:32 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-25 12:32 Dolev Raviv [this message]
2014-09-25 12:32 ` [PATCH V6 01/18] scsi: fixing the "type" for well known LUs Dolev Raviv
2014-09-26 8:13 ` Christoph Hellwig
2014-10-03 18:40 ` Elliott, Robert (Server Storage)
2014-09-25 12:32 ` [PATCH V6 02/18] scsi: sysfs: don't add scsi_device if its already added Dolev Raviv
2014-09-26 8:14 ` Christoph Hellwig
2014-09-26 13:41 ` Hannes Reinecke
2014-09-30 21:54 ` Martin K. Petersen
2014-09-25 12:32 ` [PATCH/RESEND V6 03/18] scsi: ufs: Allow vendor specific initialization Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 04/18] scsi: ufs: Add regulator enable support Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 05/18] scsi: ufs: Add clock initialization support Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 06/18] scsi: ufs: add voting support for host controller power Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 07/18] scsi: ufs: refactor query descriptor API support Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 08/18] scsi: ufs: improve init sequence Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 09/18] scsi: ufs: Active Power Mode - configuring bActiveICCLevel Dolev Raviv
2014-09-25 12:32 ` [PATCH V6 10/18] scsi: ufs: manually add well known logical units Dolev Raviv
2014-10-03 16:16 ` Akinobu Mita
2014-10-03 16:35 ` Subhash Jadavani
2014-10-03 16:35 ` Christoph Hellwig
2014-10-05 7:31 ` Akinobu Mita
2014-09-25 12:32 ` [PATCH V6 11/18] scsi: ufs: introduce well known logical unit in ufs Dolev Raviv
2014-09-25 12:32 ` [PATCH V6 12/18] scsi: ufs: add UFS power management support Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 13/18] scsi: ufs: refactor configuring power mode Dolev Raviv
2014-10-03 16:20 ` Akinobu Mita
2014-10-03 16:42 ` Subhash Jadavani
2014-09-25 12:32 ` [PATCH/RESEND V6 14/18] scsi: ufs: Add support for clock gating Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 15/18] scsi: ufs: Add freq-table-hz property for UFS device Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 16/18] scsi: ufs: Add support for clock scaling using devfreq framework Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 17/18] scsi: ufs: tune bkops while power managment events Dolev Raviv
2014-09-25 12:32 ` [PATCH/RESEND V6 18/18] scsi: ufs: definitions for phy interface Dolev Raviv
2014-09-25 15:43 ` [PATCH/RESEND V6 00/18] UFS: Power management support David Miller
2014-09-30 14:26 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411648356-3883-1-git-send-email-draviv@codeaurora.org \
--to=draviv@codeaurora.org \
--cc=James.Bottomley@HansenPartnership.com \
--cc=hch@infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-scsi-owner@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=santoshsy@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).