linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>,
	Stephen Boyd <sboyd@codeaurora.org>
Cc: Josh Cartwright <joshc@codeaurora.org>,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v3 3/8] clk: qcom: Add support for regmap divider clocks
Date: Mon, 19 Jan 2015 18:05:30 -0800	[thread overview]
Message-ID: <1421719535-28398-4-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1421719535-28398-1-git-send-email-sboyd@codeaurora.org>

From: Josh Cartwright <joshc@codeaurora.org>

Add support for dividers that use regmap instead of readl/writel.

Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[sboyd@codeaurora.org: Switch to using generic divider code, drop
enable/disable, reword commit text]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/qcom/Makefile             |  1 +
 drivers/clk/qcom/clk-regmap-divider.c | 70 +++++++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-regmap-divider.h | 29 +++++++++++++++
 3 files changed, 100 insertions(+)
 create mode 100644 drivers/clk/qcom/clk-regmap-divider.c
 create mode 100644 drivers/clk/qcom/clk-regmap-divider.h

diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 783cfb24faa4..ed8976e87c0b 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -6,6 +6,7 @@ clk-qcom-y += clk-pll.o
 clk-qcom-y += clk-rcg.o
 clk-qcom-y += clk-rcg2.o
 clk-qcom-y += clk-branch.o
+clk-qcom-y += clk-regmap-divider.o
 clk-qcom-y += reset.o
 
 obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
diff --git a/drivers/clk/qcom/clk-regmap-divider.c b/drivers/clk/qcom/clk-regmap-divider.c
new file mode 100644
index 000000000000..53484912301e
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-divider.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/export.h>
+
+#include "clk-regmap-divider.h"
+
+static inline struct clk_regmap_div *to_clk_regmap_div(struct clk_hw *hw)
+{
+	return container_of(to_clk_regmap(hw), struct clk_regmap_div, clkr);
+}
+
+static long div_round_rate(struct clk_hw *hw, unsigned long rate,
+			   unsigned long *prate)
+{
+	struct clk_regmap_div *divider = to_clk_regmap_div(hw);
+
+	return divider_round_rate(hw, rate, prate, NULL, divider->width,
+				  CLK_DIVIDER_ROUND_CLOSEST);
+}
+
+static int div_set_rate(struct clk_hw *hw, unsigned long rate,
+			unsigned long parent_rate)
+{
+	struct clk_regmap_div *divider = to_clk_regmap_div(hw);
+	struct clk_regmap *clkr = &divider->clkr;
+	u32 div;
+
+	div = divider_get_val(rate, parent_rate, NULL, divider->width,
+			      CLK_DIVIDER_ROUND_CLOSEST);
+
+	return regmap_update_bits(clkr->regmap, divider->reg,
+				  (BIT(divider->width) - 1) << divider->shift,
+				  div << divider->shift);
+}
+
+static unsigned long div_recalc_rate(struct clk_hw *hw,
+				     unsigned long parent_rate)
+{
+	struct clk_regmap_div *divider = to_clk_regmap_div(hw);
+	struct clk_regmap *clkr = &divider->clkr;
+	u32 div;
+
+	regmap_read(clkr->regmap, divider->reg, &div);
+	div >>= divider->shift;
+	div &= BIT(divider->width) - 1;
+
+	return divider_recalc_rate(hw, parent_rate, div, NULL,
+				   CLK_DIVIDER_ROUND_CLOSEST);
+}
+
+const struct clk_ops clk_regmap_div_ops = {
+	.round_rate = div_round_rate,
+	.set_rate = div_set_rate,
+	.recalc_rate = div_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_div_ops);
diff --git a/drivers/clk/qcom/clk-regmap-divider.h b/drivers/clk/qcom/clk-regmap-divider.h
new file mode 100644
index 000000000000..fc4492e3a827
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-divider.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_REGMAP_DIVIDER_H__
+#define __QCOM_CLK_REGMAP_DIVIDER_H__
+
+#include <linux/clk-provider.h>
+#include "clk-regmap.h"
+
+struct clk_regmap_div {
+	u32			reg;
+	u32			shift;
+	u32			width;
+	struct clk_regmap	clkr;
+};
+
+extern const struct clk_ops clk_regmap_div_ops;
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2015-01-20  2:05 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-20  2:05 [PATCH v3 0/8] qcom audio clock control drivers Stephen Boyd
2015-01-20  2:05 ` [PATCH v3 1/8] clk: Add __clk_mux_determine_rate_closest Stephen Boyd
2015-01-20  2:05 ` [PATCH v3 2/8] clk: divider: Make generic for usage elsewhere Stephen Boyd
2015-01-20  2:05 ` Stephen Boyd [this message]
2015-01-20  2:05 ` [PATCH v3 4/8] clk: qcom: Add simple regmap based muxes Stephen Boyd
2015-01-20  2:05 ` [PATCH v3 5/8] dt-bindings: Add #defines for IPQ806x lpass clock control Stephen Boyd
2015-01-20  2:05 ` [PATCH v3 6/8] clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver Stephen Boyd
2015-01-27 19:51   ` Mike Turquette
2015-01-20  2:05 ` [PATCH v3 7/8] clk: qcom: Add MSM8960/APQ8064 " Stephen Boyd
2015-01-27 19:51   ` Mike Turquette
2017-03-21 16:36   ` Linus Walleij
2017-03-24  8:11     ` Linus Walleij
     [not found] ` <1421719535-28398-1-git-send-email-sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-01-20  2:05   ` [PATCH v3 8/8] devicetree: bindings: Document qcom,lcc Stephen Boyd
2015-01-22 21:41 ` [PATCH v3 0/8] qcom audio clock control drivers Ken Westfield
2015-01-27 19:52   ` Mike Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1421719535-28398-4-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=joshc@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=rnayak@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).