From: Rajendra Nayak <rnayak@codeaurora.org>
To: sboyd@codeaurora.org, mturquette@linaro.org
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, georgi.djakov@linaro.org,
svarbanov@mm-sol.com, Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v3 0/6] Add support for QCOM GDSCs
Date: Fri, 20 Mar 2015 11:51:17 +0530 [thread overview]
Message-ID: <1426832483-27026-1-git-send-email-rnayak@codeaurora.org> (raw)
GDSCs (Global Distributed Switch Controllers) control switches
that supply power to an on-chip power domain and hence can be
programmed in SW to safely power collapse and restore power to the
respective PDs. They are part of a considerable number of recent QCOM
SoCs (This series adds support for msm8974, msm8916 and apq8084 devices)
and are part of the Clock control block.
The series implements support for GDSC using the genpd framework
modelling these as SW controllable power domains.
* Patch 3/6 has a dependency on 8916 GCC support series [1]
* Client drivers which plan to use GDSC can refer to
Documentation/devicetree/bindings/power/power_domain.txt to know
how to hook up the power domain for the device through DT
* Runtime PM specific documentation can be found in
Documentation/power/runtime_pm.txt
Changes since v2:
* gdsc_unregister added
* gdsc_register/unregister introduced in patch 1/6
Changes since v1:
* added err checks for regmap apis
* added gdsc_register() in gdsc.c
[1] https://lkml.org/lkml/2015/3/18/408
Rajendra Nayak (3):
clk: qcom: gdsc: Prepare common clk probe to register gdscs
clk: qcom: gdsc: Add GDSCs in msm8916 GCC
clk: qcom: gdsc: Add GDSCs in apq8084 GCC
Stephen Boyd (3):
clk: qcom: Add support for GDSCs
clk: qcom: gdsc: Add GDSCs in msm8974 GCC
clk: qcom: gdsc: Add GDSCs in msm8974 MMCC
arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +
drivers/clk/qcom/Kconfig | 9 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/common.c | 14 ++-
drivers/clk/qcom/common.h | 2 +
drivers/clk/qcom/gcc-apq8084.c | 38 ++++++
drivers/clk/qcom/gcc-msm8916.c | 46 +++++++
drivers/clk/qcom/gcc-msm8974.c | 14 +++
drivers/clk/qcom/gdsc.c | 166 ++++++++++++++++++++++++++
drivers/clk/qcom/gdsc.h | 46 +++++++
drivers/clk/qcom/mmcc-msm8974.c | 54 +++++++++
include/dt-bindings/clock/qcom,gcc-apq8084.h | 6 +
include/dt-bindings/clock/qcom,gcc-msm8916.h | 8 ++
include/dt-bindings/clock/qcom,gcc-msm8974.h | 3 +
include/dt-bindings/clock/qcom,mmcc-msm8974.h | 8 ++
16 files changed, 417 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/qcom/gdsc.c
create mode 100644 drivers/clk/qcom/gdsc.h
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2015-03-20 6:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-20 6:21 Rajendra Nayak [this message]
2015-03-20 6:21 ` [PATCH v3 1/6] clk: qcom: Add support for GDSCs Rajendra Nayak
2015-03-20 7:38 ` Srinivas Kandagatla
2015-03-20 9:51 ` Rajendra Nayak
2015-03-20 10:01 ` Rajendra Nayak
2015-03-23 23:23 ` Stephen Boyd
2015-03-24 3:10 ` Rajendra Nayak
2015-03-20 6:21 ` [PATCH v3 2/6] clk: qcom: gdsc: Prepare common clk probe to register gdscs Rajendra Nayak
2015-03-20 6:21 ` [PATCH v3 3/6] clk: qcom: gdsc: Add GDSCs in msm8916 GCC Rajendra Nayak
2015-03-20 6:21 ` [PATCH v3 4/6] clk: qcom: gdsc: Add GDSCs in msm8974 GCC Rajendra Nayak
2015-03-20 6:21 ` [PATCH v3 5/6] clk: qcom: gdsc: Add GDSCs in msm8974 MMCC Rajendra Nayak
2015-03-20 6:21 ` [PATCH v3 6/6] clk: qcom: gdsc: Add GDSCs in apq8084 GCC Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426832483-27026-1-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=georgi.djakov@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=sboyd@codeaurora.org \
--cc=svarbanov@mm-sol.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).