linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>,
	Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@arm.linux.org.uk>,
	Courtney Cavin <courtney.cavin@sonymobile.com>
Subject: [PATCH v3 01/13] ARM: Add Krait L2 register accessor functions
Date: Fri, 20 Mar 2015 23:45:20 -0700	[thread overview]
Message-ID: <1426920332-9340-2-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1426920332-9340-1-git-send-email-sboyd@codeaurora.org>

Krait CPUs have a handful of L2 cache controller registers that
live behind a cp15 based indirection register. First you program
the indirection register (l2cpselr) to point the L2 'window'
register (l2cpdr) at what you want to read/write.  Then you
read/write the 'window' register to do what you want. The
l2cpselr register is not banked per-cpu so we must lock around
accesses to it to prevent other CPUs from re-pointing l2cpdr
underneath us.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Courtney Cavin <courtney.cavin@sonymobile.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm/common/Kconfig                   |  3 ++
 arch/arm/common/Makefile                  |  1 +
 arch/arm/common/krait-l2-accessors.c      | 58 +++++++++++++++++++++++++++++++
 arch/arm/include/asm/krait-l2-accessors.h | 20 +++++++++++
 4 files changed, 82 insertions(+)
 create mode 100644 arch/arm/common/krait-l2-accessors.c
 create mode 100644 arch/arm/include/asm/krait-l2-accessors.h

diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index c3a4e9ceba34..9da52dc6260b 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -9,6 +9,9 @@ config DMABOUNCE
 	bool
 	select ZONE_DMA
 
+config KRAIT_L2_ACCESSORS
+	bool
+
 config SHARP_LOCOMO
 	bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 70b1eff477b3..6b2cddf6e8d0 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -7,6 +7,7 @@ obj-y				+= firmware.o
 obj-$(CONFIG_ICST)		+= icst.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
+obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
diff --git a/arch/arm/common/krait-l2-accessors.c b/arch/arm/common/krait-l2-accessors.c
new file mode 100644
index 000000000000..5d514bbc88a6
--- /dev/null
+++ b/arch/arm/common/krait-l2-accessors.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/export.h>
+
+#include <asm/barrier.h>
+#include <asm/krait-l2-accessors.h>
+
+static DEFINE_RAW_SPINLOCK(krait_l2_lock);
+
+void krait_set_l2_indirect_reg(u32 addr, u32 val)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&krait_l2_lock, flags);
+	/*
+	 * Select the L2 window by poking l2cpselr, then write to the window
+	 * via l2cpdr.
+	 */
+	asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
+	isb();
+	asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val));
+	isb();
+
+	raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
+}
+EXPORT_SYMBOL(krait_set_l2_indirect_reg);
+
+u32 krait_get_l2_indirect_reg(u32 addr)
+{
+	u32 val;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&krait_l2_lock, flags);
+	/*
+	 * Select the L2 window by poking l2cpselr, then read from the window
+	 * via l2cpdr.
+	 */
+	asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
+	isb();
+	asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val));
+
+	raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
+
+	return val;
+}
+EXPORT_SYMBOL(krait_get_l2_indirect_reg);
diff --git a/arch/arm/include/asm/krait-l2-accessors.h b/arch/arm/include/asm/krait-l2-accessors.h
new file mode 100644
index 000000000000..48fe5527bc01
--- /dev/null
+++ b/arch/arm/include/asm/krait-l2-accessors.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H
+#define __ASMARM_KRAIT_L2_ACCESSORS_H
+
+extern void krait_set_l2_indirect_reg(u32 addr, u32 val);
+extern u32 krait_get_l2_indirect_reg(u32 addr);
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2015-03-21  6:45 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-21  6:45 [PATCH v3 00/13] Krait clocks + Krait CPUfreq Stephen Boyd
2015-03-21  6:45 ` Stephen Boyd [this message]
2015-03-21  6:45 ` [PATCH v3 02/13] clk: mux: Split out register accessors for reuse Stephen Boyd
2015-03-21  6:45 ` [PATCH v3 03/13] clk: Avoid sending high rates to downstream clocks during set_rate Stephen Boyd
2015-03-21  6:45 ` [PATCH v3 04/13] clk: Add safe switch hook Stephen Boyd
2015-03-21  6:45 ` [PATCH v3 05/13] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Stephen Boyd
2015-03-21  6:45 ` [PATCH v3 06/13] clk: qcom: Add HFPLL driver Stephen Boyd
2015-03-21  6:45 ` [PATCH v3 07/13] clk: qcom: Add MSM8960/APQ8064's HFPLLs Stephen Boyd
2015-03-21  6:45 ` [PATCH v3 08/13] clk: qcom: Add IPQ806X's HFPLLs Stephen Boyd
2015-03-21  6:45 ` [PATCH v3 09/13] clk: qcom: Add support for Krait clocks Stephen Boyd
     [not found] ` <1426920332-9340-1-git-send-email-sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-03-21  6:45   ` [PATCH v3 10/13] clk: qcom: Add KPSS ACC/GCC driver Stephen Boyd
2015-03-21  6:45   ` [PATCH v3 11/13] clk: qcom: Add Krait clock controller driver Stephen Boyd
2015-03-21  6:45 ` [PATCH v3 12/13] cpufreq: Add module to register cpufreq on Krait CPUs Stephen Boyd
2015-03-21  6:45 ` [PATCH v3 13/13] ARM: dts: qcom: Add necessary DT data for Krait cpufreq Stephen Boyd
2015-04-02  6:17 ` [PATCH v3 00/13] Krait clocks + Krait CPUfreq Pavel Machek
2015-04-02  6:18 ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426920332-9340-2-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=courtney.cavin@sonymobile.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).