linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Georgi Djakov <georgi.djakov@linaro.org>
To: sboyd@codeaurora.org
Cc: mturquette@linaro.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: [PATCH] clk: qcom: Fix parent_map translations
Date: Fri,  3 Apr 2015 17:00:03 +0300	[thread overview]
Message-ID: <1428069603-2641-1-git-send-email-georgi.djakov@linaro.org> (raw)

When we introduced the parent_map tables, we missed to update some
of the functions where mapping is translated. Fix this.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 drivers/clk/qcom/clk-rcg.c  |   13 ++++++++++---
 drivers/clk/qcom/clk-rcg2.c |   20 +++++++++++++++-----
 2 files changed, 25 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/qcom/clk-rcg.c b/drivers/clk/qcom/clk-rcg.c
index 8f2f48071a7a..e30821a3ba68 100644
--- a/drivers/clk/qcom/clk-rcg.c
+++ b/drivers/clk/qcom/clk-rcg.c
@@ -319,7 +319,7 @@ static int clk_dyn_rcg_set_parent(struct clk_hw *hw, u8 index)
 	if (banked_p)
 		f.pre_div = ns_to_pre_div(&rcg->p[bank], ns) + 1;
 
-	f.src = index;
+	f.src = qcom_find_src_index(hw, rcg->s[bank].parent_map, index);
 	return configure_bank(rcg, &f);
 }
 
@@ -411,13 +411,19 @@ static long _freq_tbl_determine_rate(struct clk_hw *hw,
 {
 	unsigned long clk_flags;
 	struct clk *p;
+	struct clk_rcg *rcg = to_clk_rcg(hw);
+	int index;
 
 	f = qcom_find_freq(f, rate);
 	if (!f)
 		return -EINVAL;
 
+	index = qcom_find_src_index(hw, rcg->s.parent_map, f->src);
+	if (index < 0)
+		return index;
+
 	clk_flags = __clk_get_flags(hw->clk);
-	p = clk_get_parent_by_index(hw->clk, f->src);
+	p = clk_get_parent_by_index(hw->clk, index);
 	if (clk_flags & CLK_SET_RATE_PARENT) {
 		rate = rate * f->pre_div;
 		if (f->n) {
@@ -462,8 +468,9 @@ static long clk_rcg_bypass_determine_rate(struct clk_hw *hw, unsigned long rate,
 	struct clk_rcg *rcg = to_clk_rcg(hw);
 	const struct freq_tbl *f = rcg->freq_tbl;
 	struct clk *p;
+	int index = qcom_find_src_index(hw, rcg->s.parent_map, f->src);
 
-	p = clk_get_parent_by_index(hw->clk, f->src);
+	p = clk_get_parent_by_index(hw->clk, index);
 	*p_hw = __clk_get_hw(p);
 	*p_rate = __clk_round_rate(p, rate);
 
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 416becce4170..b95d17fbb8d7 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -182,13 +182,19 @@ static long _freq_tbl_determine_rate(struct clk_hw *hw,
 {
 	unsigned long clk_flags;
 	struct clk *p;
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	int index;
 
 	f = qcom_find_freq(f, rate);
 	if (!f)
 		return -EINVAL;
 
+	index = qcom_find_src_index(hw, rcg->parent_map, f->src);
+	if (index < 0)
+		return index;
+
 	clk_flags = __clk_get_flags(hw->clk);
-	p = clk_get_parent_by_index(hw->clk, f->src);
+	p = clk_get_parent_by_index(hw->clk, index);
 	if (clk_flags & CLK_SET_RATE_PARENT) {
 		if (f->pre_div) {
 			rate /= 2;
@@ -381,9 +387,10 @@ static long clk_edp_pixel_determine_rate(struct clk_hw *hw, unsigned long rate,
 	s64 request;
 	u32 mask = BIT(rcg->hid_width) - 1;
 	u32 hid_div;
+	int index = qcom_find_src_index(hw, rcg->parent_map, f->src);
 
 	/* Force the correct parent */
-	*p = __clk_get_hw(clk_get_parent_by_index(hw->clk, f->src));
+	*p = __clk_get_hw(clk_get_parent_by_index(hw->clk, index));
 
 	if (src_rate == 810000000)
 		frac = frac_table_810m;
@@ -427,6 +434,7 @@ static long clk_byte_determine_rate(struct clk_hw *hw, unsigned long rate,
 {
 	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
 	const struct freq_tbl *f = rcg->freq_tbl;
+	int index = qcom_find_src_index(hw, rcg->parent_map, f->src);
 	unsigned long parent_rate, div;
 	u32 mask = BIT(rcg->hid_width) - 1;
 	struct clk *p;
@@ -434,7 +442,7 @@ static long clk_byte_determine_rate(struct clk_hw *hw, unsigned long rate,
 	if (rate == 0)
 		return -EINVAL;
 
-	p = clk_get_parent_by_index(hw->clk, f->src);
+	p = clk_get_parent_by_index(hw->clk, index);
 	*p_hw = __clk_get_hw(p);
 	*p_rate = parent_rate = __clk_round_rate(p, rate);
 
@@ -496,7 +504,8 @@ static long clk_pixel_determine_rate(struct clk_hw *hw, unsigned long rate,
 	int delta = 100000;
 	const struct freq_tbl *f = rcg->freq_tbl;
 	const struct frac_entry *frac = frac_table_pixel;
-	struct clk *parent = clk_get_parent_by_index(hw->clk, f->src);
+	int index = qcom_find_src_index(hw, rcg->parent_map, f->src);
+	struct clk *parent = clk_get_parent_by_index(hw->clk, index);
 
 	*p = __clk_get_hw(parent);
 
@@ -525,7 +534,8 @@ static int clk_pixel_set_rate(struct clk_hw *hw, unsigned long rate,
 	int delta = 100000;
 	u32 mask = BIT(rcg->hid_width) - 1;
 	u32 hid_div;
-	struct clk *parent = clk_get_parent_by_index(hw->clk, f.src);
+	int index = qcom_find_src_index(hw, rcg->parent_map, f.src);
+	struct clk *parent = clk_get_parent_by_index(hw->clk, index);
 
 	for (; frac->num; frac++) {
 		request = (rate * frac->den) / frac->num;

             reply	other threads:[~2015-04-03 14:00 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-03 14:00 Georgi Djakov [this message]
2015-04-03 14:14 ` [PATCH] clk: qcom: Fix parent_map translations Nicolas Dechesne
2015-04-06 20:57 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1428069603-2641-1-git-send-email-georgi.djakov@linaro.org \
    --to=georgi.djakov@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).