* [PATCH] tty: serial: msm: Fix mask value of RFR level
@ 2015-04-07 13:47 Pramod Gurav
2015-04-07 23:07 ` Stephen Boyd
0 siblings, 1 reply; 2+ messages in thread
From: Pramod Gurav @ 2015-04-07 13:47 UTC (permalink / raw)
To: linux-arm-msm, linux-serial, linux-kernel
Cc: gregkh, bryanh, sboyd, jslaby, Pramod Gurav
According to documents The RFR_LEVEL1 in UART_DM_MR1 can be
programmed in bits 31:8 but the masks only bits 17:8.
Correct the same.
Signed-off-by: Pramod Gurav <gpramod@codeaurora.org>
---
drivers/tty/serial/msm_serial.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
index 8f7806d..5ff9ebf 100644
--- a/drivers/tty/serial/msm_serial.h
+++ b/drivers/tty/serial/msm_serial.h
@@ -19,7 +19,7 @@
#define UART_MR1 0x0000
#define UART_MR1_AUTO_RFR_LEVEL0 0x3F
-#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
+#define UART_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00
#define UART_MR1_RX_RDY_CTL (1 << 7)
#define UART_MR1_CTS_CTL (1 << 6)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] tty: serial: msm: Fix mask value of RFR level
2015-04-07 13:47 [PATCH] tty: serial: msm: Fix mask value of RFR level Pramod Gurav
@ 2015-04-07 23:07 ` Stephen Boyd
0 siblings, 0 replies; 2+ messages in thread
From: Stephen Boyd @ 2015-04-07 23:07 UTC (permalink / raw)
To: Pramod Gurav, linux-arm-msm, linux-serial, linux-kernel
Cc: gregkh, bryanh, jslaby
On 04/07/15 06:47, Pramod Gurav wrote:
> According to documents The RFR_LEVEL1 in UART_DM_MR1 can be
That is UART_DM_MR1
> programmed in bits 31:8 but the masks only bits 17:8.
> Correct the same.
>
> Signed-off-by: Pramod Gurav <gpramod@codeaurora.org>
> ---
> drivers/tty/serial/msm_serial.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
> index 8f7806d..5ff9ebf 100644
> --- a/drivers/tty/serial/msm_serial.h
> +++ b/drivers/tty/serial/msm_serial.h
> @@ -19,7 +19,7 @@
> #define UART_MR1 0x0000
>
> #define UART_MR1_AUTO_RFR_LEVEL0 0x3F
> -#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
> +#define UART_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00
But this is UART_MR1. The two hardware cores share the same driver
because the DM hardware is based on the non-DM hardware. I suppose we
need to make another #define UART_DM_MR1_AUTO_RFR_LEVEL1 and then have
an if (msm_port->is_uartdm) in msm_startup() path to handle the
differences here.
> #define UART_MR1_RX_RDY_CTL (1 << 7)
> #define UART_MR1_CTS_CTL (1 << 6)
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-04-07 23:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-04-07 13:47 [PATCH] tty: serial: msm: Fix mask value of RFR level Pramod Gurav
2015-04-07 23:07 ` Stephen Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).