From: Jilai Wang <jilaiw@codeaurora.org>
To: linux-arm-msm@vger.kernel.org
Cc: galak@codeaurora.org, linux-arm-kernel@lists.infradead.org,
agross@codeaurora.org, davidb@codeaurora.org,
sboyd@codeaurora.org, lina.iyer@linaro.org, robdclark@gmail.com,
linux-kernel@vger.kernel.org, Jilai Wang <jilaiw@codeaurora.org>
Subject: [PATCH] firmware: qcom: scm: Add HDCP Support (V2)
Date: Fri, 10 Apr 2015 16:15:59 -0400 [thread overview]
Message-ID: <1428696959-24555-1-git-send-email-jilaiw@codeaurora.org> (raw)
In-Reply-To: <1428012376-24545-1-git-send-email-jilaiw@codeaurora.org>
HDCP driver needs to check if secure environment supports HDCP.
If it's supported, then it requires to program some registers
through SCM.
Add qcom_scm_hdcp_available and qcom_scm_hdcp_req to support
these requirements.
V1: original change
V2: Add ARM64 SoCs support
Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
---
drivers/firmware/qcom_scm-32.c | 25 ++++++++++++++++++++++++-
drivers/firmware/qcom_scm-64.c | 41 ++++++++++++++++++++++++++++++++++++++++-
drivers/firmware/qcom_scm.c | 32 +++++++++++++++++++++++++++++++-
drivers/firmware/qcom_scm.h | 11 ++++++++++-
include/linux/qcom_scm.h | 13 ++++++++++++-
5 files changed, 117 insertions(+), 5 deletions(-)
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index 89be15e..aa9194e 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
@@ -485,3 +485,26 @@ void __qcom_scm_cpu_power_down(u32 flags)
qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
flags & QCOM_SCM_FLUSH_FLAG_MASK);
}
+
+int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+{
+ int ret;
+ u32 svc_cmd = (svc_id << 10) | cmd_id;
+ u32 ret_val = 0;
+
+ ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
+ sizeof(svc_cmd), &ret_val, sizeof(ret_val));
+ if (ret)
+ return ret;
+
+ return ret_val;
+}
+
+int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+ if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+ return -ERANGE;
+
+ return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
+ req, req_cnt * sizeof(*req), resp, sizeof(*resp));
+}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index 72b75d6..fb17234 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -435,7 +435,46 @@ void __qcom_scm_cpu_power_down(u32 flags)
qcom_scm_call_atomic(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC, &desc);
}
-#define QCOM_SCM_SVC_INFO 0x6
+int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+{
+ int ret;
+ struct qcom_scm_desc desc = {0};
+
+ desc.arginfo = QCOM_SCM_ARGS(1);
+ desc.args[0] = QCOM_SCM_SIP_FNID(svc_id, cmd_id);
+
+ ret = qcom_scm_call(
+ QCOM_SCM_SIP_FNID(QCOM_SCM_SVC_INFO, IS_CALL_AVAIL_CMD),
+ &desc);
+
+ if (ret)
+ return ret;
+
+ return desc.ret[0];
+}
+
+int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+ int ret, i, j;
+ struct qcom_scm_desc desc = {0};
+
+ if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+ return -ERANGE;
+
+ for (i = 0, j = 0; i < req_cnt; i++) {
+ desc.args[j++] = req[i].addr;
+ desc.args[j++] = req[i].val;
+ }
+ desc.arginfo = QCOM_SCM_ARGS(j);
+
+ ret = qcom_scm_call(
+ QCOM_SCM_SIP_FNID(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP),
+ &desc);
+ *resp = desc.ret[0];
+
+ return ret;
+}
+
static int __init qcom_scm_init(void)
{
int ret;
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 9989241..45c008d 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
@@ -64,3 +64,33 @@ void qcom_scm_cpu_power_down(u32 flags)
__qcom_scm_cpu_power_down(flags);
}
EXPORT_SYMBOL(qcom_scm_cpu_power_down);
+
+/**
+ * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
+ *
+ * Return true if HDCP is supported, false if not.
+ */
+bool qcom_scm_hdcp_available(void)
+{
+ int ret;
+
+ ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP,
+ QCOM_SCM_CMD_HDCP);
+
+ return (ret > 0) ? true : false;
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_available);
+
+/**
+ * qcom_scm_hdcp_req() - Send HDCP request.
+ * @req: HDCP request array
+ * @req_cnt: HDCP request array count
+ * @resp: response buffer passed to SCM
+ *
+ * Write HDCP register(s) through SCM.
+ */
+int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+ return __qcom_scm_hdcp_req(req, req_cnt, resp);
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_req);
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 9fbede4..a5839fd 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -26,4 +26,13 @@ extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
#define QCOM_SCM_CMD_CORE_HOTPLUGGED 0x10
extern void __qcom_scm_cpu_power_down(u32 flags);
+
+#define QCOM_SCM_SVC_INFO 0x6
+#define QCOM_IS_CALL_AVAIL_CMD 0x1
+extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id);
+
+#define QCOM_SCM_SVC_HDCP 0x11
+#define QCOM_SCM_CMD_HDCP 0x01
+extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+ u32 *resp);
#endif
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index d7a974d..6e7d5ec 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
* Copyright (C) 2015 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
@@ -16,6 +16,17 @@
extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+#define QCOM_SCM_HDCP_MAX_REQ_CNT 5
+
+struct qcom_scm_hdcp_req {
+ u32 addr;
+ u32 val;
+};
+
+extern bool qcom_scm_hdcp_available(void);
+extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+ u32 *resp);
+
#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0
#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
prev parent reply other threads:[~2015-04-10 20:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-02 22:06 [PATCH] firmware: qcom: scm: Add HDCP Support Jilai Wang
2015-04-10 20:15 ` Jilai Wang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1428696959-24555-1-git-send-email-jilaiw@codeaurora.org \
--to=jilaiw@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=galak@codeaurora.org \
--cc=lina.iyer@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).