From mboxrd@z Thu Jan 1 00:00:00 1970 From: Archit Taneja Subject: [PATCH 02/10] drm/r128: clean up: create a separate Kconfig file Date: Mon, 13 Jul 2015 12:06:25 +0530 Message-ID: <1436769393-3836-3-git-send-email-architt@codeaurora.org> References: <1436769393-3836-1-git-send-email-architt@codeaurora.org> Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]:55043 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750804AbbGMGgt (ORCPT ); Mon, 13 Jul 2015 02:36:49 -0400 In-Reply-To: <1436769393-3836-1-git-send-email-architt@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org To: dri-devel@lists.freedesktop.org, daniel@ffwll.ch Cc: linux-arm-msm@vger.kernel.org, airlied@linux.ie, Archit Taneja Remove the DRM_R128 config option from the top level drm Kconfig file and create a new Kconfig file within the driver folder. Signed-off-by: Archit Taneja --- drivers/gpu/drm/Kconfig | 9 +-------- drivers/gpu/drm/r128/Kconfig | 8 ++++++++ 2 files changed, 9 insertions(+), 8 deletions(-) create mode 100644 drivers/gpu/drm/r128/Kconfig diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 3f3328b..fc9d65d 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -83,14 +83,7 @@ source "drivers/gpu/drm/bridge/Kconfig" source "drivers/gpu/drm/tdfx/Kconfig" -config DRM_R128 - tristate "ATI Rage 128" - depends on DRM && PCI - select FW_LOADER - help - Choose this option if you have an ATI Rage 128 graphics card. If M - is selected, the module will be called r128. AGP support for - this card is strongly suggested (unless you have a PCI version). +source "drivers/gpu/drm/r128/Kconfig" config DRM_RADEON tristate "ATI Radeon" diff --git a/drivers/gpu/drm/r128/Kconfig b/drivers/gpu/drm/r128/Kconfig new file mode 100644 index 0000000..3c1ae88 --- /dev/null +++ b/drivers/gpu/drm/r128/Kconfig @@ -0,0 +1,8 @@ +config DRM_R128 + tristate "ATI Rage 128" + depends on DRM && PCI + select FW_LOADER + help + Choose this option if you have an ATI Rage 128 graphics card. If M + is selected, the module will be called r128. AGP support for + this card is strongly suggested (unless you have a PCI version). -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation