From: Archit Taneja <architt@codeaurora.org>
To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
cernekee@gmail.com, computersforpeace@gmail.com
Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
Archit Taneja <architt@codeaurora.org>
Subject: [PATCH v3 0/5] mtd: Qualcomm NAND controller driver
Date: Mon, 3 Aug 2015 10:38:13 +0530 [thread overview]
Message-ID: <1438578498-32254-1-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1421419702-17812-1-git-send-email-architt@codeaurora.org>
Add support for the NAND controller driver for SoC's that contain EBI2.
For now, the only SoC upstream that has EBI2 is IPQ806x.
The original version was posted a while back. The main comments were
about the driver not being able to use nand_bbt. This was because the
controller could read factory bad block markers only in RAW mode. This
forced us to implement our own versions of chip->block_bad and
chip->blobk_markbad, and also we had to skip creating a BBT.
Discussions with Kevin Cernekee concluded that having a new BBT flag
that incorporates this controller's special requirement is a possible
option.
The new version makes use of this flag and now uses nand_bbt, at the
cost of implement read_oob_raw and write_oob_raw ops.
The patchset requires the v6 ADM dmaengine patches posted by Andy:
https://lkml.org/lkml/2015/3/17/19
v3:
- Various fixes and clean ups suggested by Stephen Boyd.
v2:
- Added a new BBT flag that allows us to read BBM in raw mode
- reduce memcpy-s in the driver
- some refactor and clean ups because of above changes
v1:
- original series:
https://lkml.org/lkml/2015/1/16/317
Archit Taneja (5):
mtd: nand: Create a BBT flag to access bad block markers in raw mode
mtd: nand: Qualcomm NAND controller driver
dt/bindings: qcom_nandc: Add DT bindings
arm: qcom: dts: Add NAND controller node for ipq806x
arm: qcom: dts: Enable NAND node on IPQ8064 AP148 platform
.../devicetree/bindings/mtd/qcom_nandc.txt | 49 +
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 +
arch/arm/boot/dts/qcom-ipq8064.dtsi | 15 +
drivers/mtd/nand/Kconfig | 7 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/nand_base.c | 6 +-
drivers/mtd/nand/nand_bbt.c | 6 +-
drivers/mtd/nand/qcom_nandc.c | 1913 ++++++++++++++++++++
include/linux/mtd/bbm.h | 7 +
9 files changed, 2038 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt
create mode 100644 drivers/mtd/nand/qcom_nandc.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2015-08-03 5:08 UTC|newest]
Thread overview: 127+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-16 14:48 [PATCH 0/5] mtd: Qualcomm NAND controller driver Archit Taneja
2015-01-16 14:48 ` [PATCH 1/5] clk: qcom: Add EBI2 clocks for IPQ806x Archit Taneja
2015-01-16 21:56 ` Stephen Boyd
2015-01-19 10:32 ` Archit Taneja
2015-01-29 22:21 ` Stephen Boyd
2015-01-16 14:48 ` [PATCH 2/5] mtd: nand: Add qcom nand controller driver Archit Taneja
2015-01-21 0:54 ` Daniel Ehrenberg
2015-01-22 6:36 ` Archit Taneja
2015-01-26 21:05 ` Kevin Cernekee
2015-01-27 3:56 ` Archit Taneja
[not found] ` <1421419702-17812-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-01-16 14:48 ` [PATCH 3/5] Documentaion: dt: add DT bindings for Qualcomm NAND controller Archit Taneja
2015-01-16 14:48 ` [PATCH 4/5] arm: qcom: dts: Add NAND controller node for ipq806x Archit Taneja
2015-01-16 14:48 ` [PATCH 5/5] arm: qcom: dts: Enale NAND node on IPQ8064 AP148 pplatform Archit Taneja
2015-02-18 6:03 ` [PATCH 0/5] mtd: Qualcomm NAND controller driver Archit Taneja
2015-07-21 10:34 ` [PATCH v2 " Archit Taneja
2015-07-21 10:34 ` [PATCH v2 1/5] mtd: nand: Create a BBT flag to access bad block markers in raw mode Archit Taneja
2015-07-24 19:01 ` Andy Gross
2015-07-21 10:34 ` [PATCH v2 2/5] mtd: nand: Qualcomm NAND controller driver Archit Taneja
2015-07-24 19:39 ` Andy Gross
2015-07-25 0:51 ` Stephen Boyd
2015-07-28 4:34 ` Archit Taneja
2015-07-29 1:48 ` Stephen Boyd
2015-07-29 5:14 ` Archit Taneja
2015-07-29 18:33 ` Stephen Boyd
2015-07-30 6:53 ` Archit Taneja
2015-07-21 10:34 ` [PATCH v2 3/5] dt/bindings: qcom_nandc: Add DT bindings Archit Taneja
2015-07-24 18:57 ` Andy Gross
2015-07-24 19:37 ` Stephen Boyd
2015-07-21 10:34 ` [PATCH v2 4/5] arm: qcom: dts: Add NAND controller node for ipq806x Archit Taneja
2015-07-24 19:01 ` Andy Gross
2015-07-21 10:34 ` [PATCH v2 5/5] arm: qcom: dts: Enale NAND node on IPQ8064 AP148 platform Archit Taneja
2015-07-24 18:58 ` Andy Gross
2015-07-24 18:59 ` Andy Gross
2015-08-03 5:08 ` Archit Taneja [this message]
2015-08-03 5:08 ` [PATCH v3 1/5] mtd: nand: Create a BBT flag to access bad block markers in raw mode Archit Taneja
2015-08-03 5:08 ` [PATCH v3 2/5] mtd: nand: Qualcomm NAND controller driver Archit Taneja
2015-08-03 23:38 ` Stephen Boyd
2015-08-04 15:04 ` Archit Taneja
2015-08-04 17:53 ` Stephen Boyd
2015-08-03 5:08 ` [PATCH v3 3/5] dt/bindings: qcom_nandc: Add DT bindings Archit Taneja
2015-08-03 5:08 ` [PATCH v3 4/5] arm: qcom: dts: Add NAND controller node for ipq806x Archit Taneja
[not found] ` <1438578498-32254-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-08-03 5:08 ` [PATCH v3 5/5] arm: qcom: dts: Enable NAND node on IPQ8064 AP148 platform Archit Taneja
2015-08-03 19:35 ` Andy Gross
2015-08-04 15:05 ` Archit Taneja
2015-08-03 20:58 ` Stephen Boyd
2015-08-04 15:06 ` Archit Taneja
2015-08-19 4:49 ` [PATCH v4 0/5] mtd: Qualcomm NAND controller driver Archit Taneja
2015-08-19 4:49 ` [PATCH v4 1/5] mtd: nand: Create a BBT flag to access bad block markers in raw mode Archit Taneja
2015-10-02 2:44 ` Brian Norris
2015-10-02 6:27 ` Boris Brezillon
2015-10-11 20:03 ` Brian Norris
2015-11-10 5:13 ` Archit Taneja
2015-08-19 4:49 ` [PATCH v4 2/5] mtd: nand: Qualcomm NAND controller driver Archit Taneja
2015-08-26 23:37 ` Stephen Boyd
2015-09-13 13:42 ` Archit Taneja
2015-10-02 3:05 ` Brian Norris
2015-10-05 6:51 ` Archit Taneja
2015-10-06 9:17 ` Brian Norris
2015-10-07 4:11 ` Archit Taneja
2015-10-02 17:31 ` Brian Norris
2015-12-16 9:15 ` Boris Brezillon
2015-12-16 11:57 ` Archit Taneja
2015-12-16 14:18 ` Boris Brezillon
2015-12-17 9:48 ` Archit Taneja
2015-12-18 18:48 ` Boris Brezillon
2015-12-16 19:16 ` Brian Norris
2015-08-19 4:49 ` [PATCH v4 3/5] dt/bindings: qcom_nandc: Add DT bindings Archit Taneja
2015-12-16 6:33 ` Boris Brezillon
2015-12-16 8:11 ` Archit Taneja
2015-08-19 4:49 ` [PATCH v4 4/5] arm: qcom: dts: Add NAND controller node for ipq806x Archit Taneja
2015-08-19 4:49 ` [PATCH v4 5/5] arm: qcom: dts: Enable NAND node on IPQ8064 AP148 platform Archit Taneja
2016-01-05 5:24 ` [PATCH v5 0/3] mtd: Qualcomm NAND controller driver Archit Taneja
2016-01-05 5:24 ` [PATCH v5 1/3] mtd: nand: don't select chip in nand_chip's block_bad op Archit Taneja
2016-01-06 16:05 ` Boris Brezillon
2016-01-07 4:27 ` Archit Taneja
2016-01-05 5:25 ` [PATCH v5 2/3] mtd: nand: Qualcomm NAND controller driver Archit Taneja
2016-01-06 17:05 ` Boris Brezillon
2016-01-08 6:33 ` Archit Taneja
2016-01-08 8:01 ` Boris Brezillon
2016-01-08 10:23 ` Archit Taneja
2016-01-08 10:31 ` Boris Brezillon
2016-01-08 10:42 ` Archit Taneja
2016-01-05 5:25 ` [PATCH v5 3/3] dt/bindings: qcom_nandc: Add DT bindings Archit Taneja
2016-01-06 15:05 ` Boris Brezillon
2016-01-06 15:14 ` Rob Herring
2016-01-06 15:37 ` Boris Brezillon
2016-01-06 16:13 ` Rob Herring
2016-01-06 16:36 ` Boris Brezillon
2016-01-18 9:50 ` [PATCH v6 0/3] mtd: Qualcomm NAND controller driver Archit Taneja
2016-01-18 9:50 ` [PATCH v6 1/3] mtd: nand: don't select chip in nand_chip's block_bad op Archit Taneja
2016-01-18 10:29 ` Boris Brezillon
2016-01-18 10:47 ` Archit Taneja
2016-01-18 9:50 ` [PATCH v6 2/3] mtd: nand: Qualcomm NAND controller driver Archit Taneja
2016-01-18 11:01 ` Boris Brezillon
2016-01-18 11:14 ` Archit Taneja
2016-01-18 9:50 ` [PATCH v6 3/3] dt/bindings: qcom_nandc: Add DT bindings Archit Taneja
2016-01-20 14:46 ` Rob Herring
2016-01-21 7:13 ` [PATCH v7 0/3] mtd: Qualcomm NAND controller driver Archit Taneja
2016-01-21 7:13 ` [PATCH v7 1/3] mtd: nand: don't select chip in nand_chip's block_bad op Archit Taneja
2016-01-21 8:33 ` Boris Brezillon
2016-01-21 7:13 ` [PATCH v7 2/3] mtd: nand: Qualcomm NAND controller driver Archit Taneja
2016-01-21 8:51 ` Boris Brezillon
2016-01-21 9:52 ` Archit Taneja
2016-01-21 10:13 ` Boris Brezillon
2016-01-21 11:00 ` Archit Taneja
2016-01-21 12:36 ` Boris Brezillon
2016-01-21 13:08 ` Archit Taneja
2016-01-21 13:25 ` Boris Brezillon
2016-01-25 7:43 ` Archit Taneja
2016-01-21 7:13 ` [PATCH v7 3/3] dt/bindings: qcom_nandc: Add DT bindings Archit Taneja
2016-01-21 7:23 ` Archit Taneja
2016-02-03 8:59 ` [PATCH v8 0/3] mtd: Qualcomm NAND controller driver Archit Taneja
2016-02-03 8:59 ` [PATCH v8 1/3] mtd: nand: don't select chip in nand_chip's block_bad op Archit Taneja
2016-02-03 8:59 ` [PATCH v8 2/3] mtd: nand: Qualcomm NAND controller driver Archit Taneja
2016-02-04 10:39 ` Boris Brezillon
2016-02-04 16:13 ` Archit Taneja
2016-02-16 6:50 ` Archit Taneja
2016-03-08 10:13 ` Archit Taneja
2016-03-18 15:49 ` Boris Brezillon
2016-03-18 16:48 ` Boris Brezillon
2016-03-19 10:14 ` Archit Taneja
2016-03-19 10:34 ` Boris Brezillon
2016-03-22 13:10 ` Archit Taneja
2016-03-22 14:05 ` Boris Brezillon
2016-02-03 8:59 ` [PATCH v8 3/3] dt/bindings: qcom_nandc: Add DT bindings Archit Taneja
2016-03-10 19:47 ` [PATCH v8 0/3] mtd: Qualcomm NAND controller driver Brian Norris
2016-03-16 5:43 ` Archit Taneja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438578498-32254-1-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=cernekee@gmail.com \
--cc=computersforpeace@gmail.com \
--cc=dehrenberg@google.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).