linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: sboyd@codeaurora.org, mturquette@baylibre.com
Cc: linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	georgi.djakov@linaro.org, svarbanov@mm-sol.com,
	srinivas.kandagatla@linaro.org, sviau@codeaurora.org,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v8 09/13] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC
Date: Thu,  6 Aug 2015 16:07:50 +0530	[thread overview]
Message-ID: <1438857474-20262-10-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1438857474-20262-1-git-send-email-rnayak@codeaurora.org>

From: Stephane Viau <sviau@codeaurora.org>

Add the GDSC instances that exist as part of apq8084 MMCC block.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/clk/qcom/Kconfig                      |  1 +
 drivers/clk/qcom/mmcc-apq8084.c               | 86 ++++++++++++++++++++++++++-
 include/dt-bindings/clock/qcom,mmcc-apq8084.h | 10 ++++
 3 files changed, 96 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index fe00dd6..47b988f 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -17,6 +17,7 @@ config APQ_GCC_8084
 config APQ_MMCC_8084
 	tristate "APQ8084 Multimedia Clock Controller"
 	select APQ_GCC_8084
+	select QCOM_GDSC
 	depends on COMMON_CLK_QCOM
 	help
 	  Support for the multimedia clock controller on apq8084 devices.
diff --git a/drivers/clk/qcom/mmcc-apq8084.c b/drivers/clk/qcom/mmcc-apq8084.c
index 1b17df2..6498eaa 100644
--- a/drivers/clk/qcom/mmcc-apq8084.c
+++ b/drivers/clk/qcom/mmcc-apq8084.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -26,6 +26,7 @@
 #include "clk-rcg.h"
 #include "clk-branch.h"
 #include "reset.h"
+#include "gdsc.h"
 
 enum {
 	P_XO,
@@ -3077,6 +3078,76 @@ static const struct pll_config mmpll3_config = {
 	.aux_output_mask = BIT(1),
 };
 
+static struct gdsc venus0_gdsc = {
+	.gdscr = 0x1024,
+	.pd = {
+		.name = "venus0",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc venus0_core0_gdsc = {
+	.gdscr = 0x1040,
+	.pd = {
+		.name = "venus0_core0",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc venus0_core1_gdsc = {
+	.gdscr = 0x1044,
+	.pd = {
+		.name = "venus0_core1",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc mdss_gdsc = {
+	.gdscr = 0x2304,
+	.cxcs = (unsigned int []){ 0x231c, 0x2320 },
+	.cxc_count = 2,
+	.pd = {
+		.name = "mdss",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc camss_jpeg_gdsc = {
+	.gdscr = 0x35a4,
+	.pd = {
+		.name = "camss_jpeg",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc camss_vfe_gdsc = {
+	.gdscr = 0x36a4,
+	.cxcs = (unsigned int []){ 0x36a8, 0x36ac, 0x36b0 },
+	.cxc_count = 3,
+	.pd = {
+		.name = "camss_vfe",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc oxili_gdsc = {
+	.gdscr = 0x4024,
+	.cxcs = (unsigned int []){ 0x4028 },
+	.cxc_count = 1,
+	.pd = {
+		.name = "oxili",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc oxilicx_gdsc = {
+	.gdscr = 0x4034,
+	.pd = {
+		.name = "oxilicx",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
 static struct clk_regmap *mmcc_apq8084_clocks[] = {
 	[MMSS_AHB_CLK_SRC] = &mmss_ahb_clk_src.clkr,
 	[MMSS_AXI_CLK_SRC] = &mmss_axi_clk_src.clkr,
@@ -3294,6 +3365,17 @@ static const struct qcom_reset_map mmcc_apq8084_resets[] = {
 	[MMSSNOCAXI_RESET] = { 0x5060 },
 };
 
+static struct gdsc *mmcc_apq8084_gdscs[] = {
+	[VENUS0_GDSC] = &venus0_gdsc,
+	[VENUS0_CORE0_GDSC] = &venus0_core0_gdsc,
+	[VENUS0_CORE1_GDSC] = &venus0_core1_gdsc,
+	[MDSS_GDSC] = &mdss_gdsc,
+	[CAMSS_JPEG_GDSC] = &camss_jpeg_gdsc,
+	[CAMSS_VFE_GDSC] = &camss_vfe_gdsc,
+	[OXILI_GDSC] = &oxili_gdsc,
+	[OXILICX_GDSC] = &oxilicx_gdsc,
+};
+
 static const struct regmap_config mmcc_apq8084_regmap_config = {
 	.reg_bits	= 32,
 	.reg_stride	= 4,
@@ -3308,6 +3390,8 @@ static const struct qcom_cc_desc mmcc_apq8084_desc = {
 	.num_clks = ARRAY_SIZE(mmcc_apq8084_clocks),
 	.resets = mmcc_apq8084_resets,
 	.num_resets = ARRAY_SIZE(mmcc_apq8084_resets),
+	.gdscs = mmcc_apq8084_gdscs,
+	.num_gdscs = ARRAY_SIZE(mmcc_apq8084_gdscs),
 };
 
 static const struct of_device_id mmcc_apq8084_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,mmcc-apq8084.h b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
index d72b5b3..03861e3 100644
--- a/include/dt-bindings/clock/qcom,mmcc-apq8084.h
+++ b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
@@ -180,4 +180,14 @@
 #define VPU_SLEEP_CLK			163
 #define VPU_VDP_CLK			164
 
+/* GDSCs */
+#define VENUS0_GDSC			0
+#define VENUS0_CORE0_GDSC		1
+#define VENUS0_CORE1_GDSC		2
+#define MDSS_GDSC			3
+#define CAMSS_JPEG_GDSC			4
+#define CAMSS_VFE_GDSC			5
+#define OXILI_GDSC			6
+#define OXILICX_GDSC			7
+
 #endif
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2015-08-06 10:39 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-06 10:37 [PATCH v8 00/13] qcom: Add support for GDSCs Rajendra Nayak
2015-08-06 10:37 ` [PATCH v8 01/13] clk: " Rajendra Nayak
2015-08-11  6:59   ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 02/13] clk: qcom: gdsc: Prepare common clk probe to register gdscs Rajendra Nayak
2015-08-11  6:59   ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 03/13] clk: qcom: gdsc: Add support for Memory RET/OFF Rajendra Nayak
2015-08-11  6:59   ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 04/13] clk: qcom: gdsc: Add support for ON only state Rajendra Nayak
2015-08-11  6:59   ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 05/13] clk: qcom: gdsc: Add GDSCs in msm8916 GCC Rajendra Nayak
2015-08-11  6:59   ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 06/13] clk: qcom: gdsc: Add GDSCs in msm8974 GCC Rajendra Nayak
2015-08-11  6:59   ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 07/13] clk: qcom: gdsc: Add GDSCs in msm8974 MMCC Rajendra Nayak
2015-08-11  6:59   ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 08/13] clk: qcom: gdsc: Add GDSCs in apq8084 GCC Rajendra Nayak
2015-08-11  7:01   ` Stephen Boyd
2015-08-06 10:37 ` Rajendra Nayak [this message]
2015-08-11  7:02   ` [PATCH v8 09/13] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 10/13] arm: dts: qcom: Add #power-domain-cells property Rajendra Nayak
2015-08-11  6:53   ` Stephen Boyd
2015-08-13  4:24     ` Rajendra Nayak
2015-08-14  1:44       ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 11/13] clk: qcom: gdsc: Use PM clocks to control gdsc clocks Rajendra Nayak
2015-08-11  6:52   ` Stephen Boyd
2015-08-13  4:23     ` Rajendra Nayak
2015-11-27  8:29     ` Rajendra Nayak
2015-12-01  8:59       ` Stephen Boyd
2015-08-06 10:37 ` [PATCH v8 12/13] clk: qcom: gdsc: Enable an RCG before turing on the gdsc Rajendra Nayak
2015-08-06 10:37 ` [PATCH v8 13/13] clk: qcom: gdsc: Manage clocks with !CONFIG_PM Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1438857474-20262-10-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=georgi.djakov@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@codeaurora.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=svarbanov@mm-sol.com \
    --cc=sviau@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).