From: Stephane Viau <sviau@codeaurora.org>
To: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 06/10] drm/msm/hdmi: Add basic HDMI support for msm8996
Date: Tue, 15 Sep 2015 08:41:49 -0400 [thread overview]
Message-ID: <1442320913-3248-7-git-send-email-sviau@codeaurora.org> (raw)
In-Reply-To: <1442320913-3248-1-git-send-email-sviau@codeaurora.org>
The HDMI controller is new in MDP5 v1.7. As of now, this change
doesn't reflect the novelty and only adds the basics so the probe
gets triggered.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
---
Documentation/devicetree/bindings/drm/msm/hdmi.txt | 3 +++
drivers/gpu/drm/msm/hdmi/hdmi.c | 17 ++++++++++++++---
2 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
index e926239..379ee2e 100644
--- a/Documentation/devicetree/bindings/drm/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
@@ -2,6 +2,7 @@ Qualcomm adreno/snapdragon hdmi output
Required properties:
- compatible: one of the following
+ * "qcom,hdmi-tx-8996"
* "qcom,hdmi-tx-8994"
* "qcom,hdmi-tx-8084"
* "qcom,hdmi-tx-8974"
@@ -21,6 +22,7 @@ Required properties:
Optional properties:
- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
+- power-domains: reference to the power domain(s), if available.
- pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active)
- pinctrl-1: the "sleep" pinctrl state
@@ -35,6 +37,7 @@ Example:
reg-names = "core_physical";
reg = <0x04a00000 0x1000>;
interrupts = <GIC_SPI 79 0>;
+ power-domains = <&mmcc MDSS_GDSC>;
clock-names =
"core_clk",
"master_iface_clk",
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c
index 101b324..1f4a95e 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
@@ -328,6 +328,9 @@ fail:
.item ## _names = item ##_names_ ## entry, \
.item ## _cnt = ARRAY_SIZE(item ## _names_ ## entry)
+static const char *pwr_reg_names_none[] = {};
+static const char *hpd_reg_names_none[] = {};
+
static struct hdmi_platform_config hdmi_tx_8660_config = {
.phy_init = hdmi_phy_8x60_init,
};
@@ -367,18 +370,26 @@ static struct hdmi_platform_config hdmi_tx_8084_config = {
.hpd_freq = hpd_clk_freq_8x74,
};
-static const char *hpd_reg_names_8x94[] = {};
-
static struct hdmi_platform_config hdmi_tx_8994_config = {
.phy_init = NULL, /* nothing to do for this HDMI PHY 20nm */
HDMI_CFG(pwr_reg, 8x74),
- HDMI_CFG(hpd_reg, 8x94),
+ HDMI_CFG(hpd_reg, none),
+ HDMI_CFG(pwr_clk, 8x74),
+ HDMI_CFG(hpd_clk, 8x74),
+ .hpd_freq = hpd_clk_freq_8x74,
+};
+
+static struct hdmi_platform_config hdmi_tx_8996_config = {
+ .phy_init = NULL,
+ HDMI_CFG(pwr_reg, none),
+ HDMI_CFG(hpd_reg, none),
HDMI_CFG(pwr_clk, 8x74),
HDMI_CFG(hpd_clk, 8x74),
.hpd_freq = hpd_clk_freq_8x74,
};
static const struct of_device_id dt_match[] = {
+ { .compatible = "qcom,hdmi-tx-8996", .data = &hdmi_tx_8996_config },
{ .compatible = "qcom,hdmi-tx-8994", .data = &hdmi_tx_8994_config },
{ .compatible = "qcom,hdmi-tx-8084", .data = &hdmi_tx_8084_config },
{ .compatible = "qcom,hdmi-tx-8974", .data = &hdmi_tx_8974_config },
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-09-15 12:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-15 12:41 [PATCH 00/10] drm/msm: Add support for MSM8996 Stephane Viau
2015-09-15 12:41 ` [PATCH 01/10] drm/msm/mdp5: remove the cfg pointer from SMP struct Stephane Viau
2015-09-15 12:41 ` [PATCH 02/10] drm/msm/mdp5: Disable hardware translation table walks (MSM8996) Stephane Viau
2015-09-15 12:41 ` [PATCH 03/10] drm/msm: Fix IOMMU clean up path in case msm_iommu_new() fails Stephane Viau
2015-09-15 12:41 ` [PATCH 04/10] drm/msm/mdp5: Avoid printing error messages for optional clocks Stephane Viau
2015-09-15 12:41 ` [PATCH 05/10] drm/msm/mdp5: Vote for SMMU power when performing translations Stephane Viau
2015-09-15 12:41 ` Stephane Viau [this message]
2015-09-15 12:41 ` [PATCH 07/10] drm/msm/mdp: Update generated headers (Pixel Extension) Stephane Viau
2015-09-15 12:45 ` [PATCH] rnndb: Add Pixel Extension registers Stephane Viau
2015-09-15 12:41 ` [PATCH 08/10] drm/msm/mdp5: Use the newly introduced enum mdp_component_type Stephane Viau
2015-09-15 12:41 ` [PATCH 09/10] drm/msm/mdp: Add Software Pixel Extension support Stephane Viau
2015-09-15 12:41 ` [PATCH 10/10] drm/msm/mdp5: Basic support for MDP5 v1.7 (MSM8996) Stephane Viau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442320913-3248-7-git-send-email-sviau@codeaurora.org \
--to=sviau@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).