From: Archit Taneja <architt@codeaurora.org>
To: dri-devel@lists.freedesktop.org, robdclark@gmail.com,
hali@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org
Subject: [PATCH 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064
Date: Wed, 14 Oct 2015 18:28:52 +0530 [thread overview]
Message-ID: <1444827544-25656-1-git-send-email-architt@codeaurora.org> (raw)
Add support for DSI on 8960/8064. The DSI IP used in these chips is an
older version(DSIv2) of what we have right now(DSI6G).
The bulk of the additions come thanks to a different PHY/PLL. The DSI
host in itself doesn't have too many changes.
Archit Taneja (12):
drm/msm/dsi: Update generated header for 8960
drm/msm/dsi: Add support for 28nm PHY on 8960
drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY
drm/msm/dsi: Use a better way to figure out DSI version
drm/msm/dsi: Delay dsi_clk_init
drm/msm/dsi: Parse bus clocks from a list
drm/msm/dsi: Set up link clocks for DSIv2
drm/msm/dsi: Add dsi_cfg for APQ8064
drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2
drm/msm/dsi: SFPB: Update generated headers
drm/msm/dsi: Enable MMSS SPFB port via syscon
dt-bindings: Add DSIv2 documentation
Documentation/devicetree/bindings/drm/msm/dsi.txt | 10 +-
drivers/gpu/drm/msm/Kconfig | 8 +
drivers/gpu/drm/msm/Makefile | 2 +
drivers/gpu/drm/msm/dsi/dsi.h | 6 +-
drivers/gpu/drm/msm/dsi/dsi.xml.h | 243 +++++++---
drivers/gpu/drm/msm/dsi/dsi_cfg.c | 35 +-
drivers/gpu/drm/msm/dsi/dsi_cfg.h | 4 +
drivers/gpu/drm/msm/dsi/dsi_host.c | 497 ++++++++++++++------
drivers/gpu/drm/msm/dsi/dsi_manager.c | 6 +-
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 4 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 195 ++++++++
drivers/gpu/drm/msm/dsi/pll/dsi_pll.c | 3 +
drivers/gpu/drm/msm/dsi/pll/dsi_pll.h | 10 +
drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 529 ++++++++++++++++++++++
drivers/gpu/drm/msm/dsi/sfpb.xml.h | 26 +-
16 files changed, 1363 insertions(+), 216 deletions(-)
create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2015-10-14 12:58 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-14 12:58 Archit Taneja [this message]
2015-10-14 12:58 ` [PATCH 01/12] drm/msm/dsi: Update generated header for 8960 Archit Taneja
2015-10-14 12:58 ` [PATCH 02/12] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-10-14 12:58 ` [PATCH 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-10-14 20:35 ` Stephen Boyd
2015-10-16 13:08 ` Archit Taneja
2015-10-16 18:28 ` Stephen Boyd
2015-10-14 12:58 ` [PATCH 04/12] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-10-14 12:58 ` [PATCH 05/12] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-10-14 12:58 ` [PATCH 06/12] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-10-14 12:58 ` [PATCH 07/12] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-10-14 12:59 ` [PATCH 08/12] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-10-14 12:59 ` [PATCH 09/12] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-10-14 12:59 ` [PATCH 10/12] drm/msm/dsi: SFPB: Update generated headers Archit Taneja
2015-10-14 12:59 ` [PATCH 11/12] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-10-14 12:59 ` [PATCH 12/12] dt-bindings: Add DSIv2 documentation Archit Taneja
2015-11-18 10:55 ` [PATCH v2 00/10] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 01/10] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 02/10] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-11-18 10:55 ` [PATCH v2 03/10] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-11-18 10:55 ` [PATCH v2 04/10] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-11-18 10:55 ` [PATCH v2 05/10] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-11-18 10:55 ` [PATCH v2 06/10] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 07/10] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 08/10] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 09/10] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-11-18 10:55 ` [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation Archit Taneja
2015-11-18 13:18 ` Rob Herring
2015-11-18 15:24 ` Archit Taneja
[not found] ` <564C981F.3040907-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-11-20 19:59 ` Rob Herring
2015-11-23 6:13 ` Archit Taneja
2015-12-02 8:20 ` Stephen Boyd
2015-12-02 8:34 ` Stephen Boyd
2015-12-07 6:51 ` Archit Taneja
2015-12-02 9:56 ` Archit Taneja
2015-12-03 7:16 ` Stephen Boyd
2015-12-03 11:11 ` Archit Taneja
2015-12-01 9:59 ` [PATCH v3 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064 Archit Taneja
2015-12-01 9:59 ` [PATCH v3 01/12] drm/msm/dsi: Don't get byte/pixel source clocks from DT Archit Taneja
2015-12-01 10:00 ` [PATCH v3 02/12] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-12-01 10:00 ` [PATCH v3 04/12] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-12-01 10:00 ` [PATCH v3 05/12] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-12-01 10:00 ` [PATCH v3 06/12] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-12-01 10:00 ` [PATCH v3 07/12] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 08/12] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 09/12] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 10/12] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-12-01 10:00 ` [PATCH v3 11/12] dt-bindings: msm/dsi: Fix the order in which clocks are listed Archit Taneja
2015-12-04 14:45 ` Rob Herring
2015-12-01 10:00 ` [PATCH v3 12/12] dt-bindings: msm/dsi: Add DSIv2 documentation Archit Taneja
2015-12-04 14:46 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444827544-25656-1-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hali@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).