From: Archit Taneja <architt@codeaurora.org>
To: dri-devel@lists.freedesktop.org, robdclark@gmail.com,
hali@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org, Archit Taneja <architt@codeaurora.org>
Subject: [PATCH 11/12] drm/msm/dsi: Enable MMSS SPFB port via syscon
Date: Wed, 14 Oct 2015 18:29:03 +0530 [thread overview]
Message-ID: <1444827544-25656-12-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1444827544-25656-1-git-send-email-architt@codeaurora.org>
For DSIv2 to work, we need to enable MMSS_AHB_ARB_MASTER_PORT in
MMSS_SFPB. We enable the required bitfield by retrieving MMSS_SFPB
regmap pointer via syscon.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/dsi/dsi_host.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 006591d..5f3142a 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -24,10 +24,13 @@
#include <linux/of_graph.h>
#include <linux/regulator/consumer.h>
#include <linux/spinlock.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <video/mipi_display.h>
#include "dsi.h"
#include "dsi.xml.h"
+#include "sfpb.xml.h"
#include "dsi_cfg.h"
static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
@@ -149,6 +152,8 @@ struct msm_dsi_host {
u8 *rx_buf;
+ struct regmap *sfpb;
+
struct drm_display_mode *mode;
/* connected device info */
@@ -1573,6 +1578,16 @@ static int dsi_host_parse_dt(struct msm_dsi_host *msm_host)
msm_host->device_node = device_node;
+ if (of_property_read_bool(np, "syscon-sfpb")) {
+ msm_host->sfpb = syscon_regmap_lookup_by_phandle(np,
+ "syscon-sfpb");
+ if (IS_ERR(msm_host->sfpb)) {
+ dev_err(dev, "%s: failed to get sfpb regmap\n",
+ __func__);
+ return PTR_ERR(msm_host->sfpb);
+ }
+ }
+
return 0;
}
@@ -2036,6 +2051,20 @@ int msm_dsi_host_disable(struct mipi_dsi_host *host)
return 0;
}
+static void msm_dsi_sfpb_config(struct msm_dsi_host *msm_host, bool enable)
+{
+ enum sfpb_ahb_arb_master_port_en en;
+
+ if (!msm_host->sfpb)
+ return;
+
+ en = enable ? SFPB_MASTER_PORT_ENABLE : SFPB_MASTER_PORT_DISABLE;
+
+ regmap_update_bits(msm_host->sfpb, REG_SFPB_GPREG,
+ SFPB_GPREG_MASTER_PORT_EN__MASK,
+ SFPB_GPREG_MASTER_PORT_EN(en));
+}
+
int msm_dsi_host_power_on(struct mipi_dsi_host *host)
{
struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
@@ -2048,6 +2077,8 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host)
goto unlock_ret;
}
+ msm_dsi_sfpb_config(msm_host, true);
+
ret = dsi_calc_clk_rate(msm_host);
if (ret) {
pr_err("%s: unable to calc clk rate, %d\n", __func__, ret);
@@ -2135,6 +2166,8 @@ int msm_dsi_host_power_off(struct mipi_dsi_host *host)
dsi_host_regulator_disable(msm_host);
+ msm_dsi_sfpb_config(msm_host, false);
+
DBG("-");
msm_host->power_on = false;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2015-10-14 12:59 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-14 12:58 [PATCH 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064 Archit Taneja
2015-10-14 12:58 ` [PATCH 01/12] drm/msm/dsi: Update generated header for 8960 Archit Taneja
2015-10-14 12:58 ` [PATCH 02/12] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-10-14 12:58 ` [PATCH 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-10-14 20:35 ` Stephen Boyd
2015-10-16 13:08 ` Archit Taneja
2015-10-16 18:28 ` Stephen Boyd
2015-10-14 12:58 ` [PATCH 04/12] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-10-14 12:58 ` [PATCH 05/12] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-10-14 12:58 ` [PATCH 06/12] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-10-14 12:58 ` [PATCH 07/12] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-10-14 12:59 ` [PATCH 08/12] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-10-14 12:59 ` [PATCH 09/12] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-10-14 12:59 ` [PATCH 10/12] drm/msm/dsi: SFPB: Update generated headers Archit Taneja
2015-10-14 12:59 ` Archit Taneja [this message]
2015-10-14 12:59 ` [PATCH 12/12] dt-bindings: Add DSIv2 documentation Archit Taneja
2015-11-18 10:55 ` [PATCH v2 00/10] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 01/10] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 02/10] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-11-18 10:55 ` [PATCH v2 03/10] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-11-18 10:55 ` [PATCH v2 04/10] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-11-18 10:55 ` [PATCH v2 05/10] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-11-18 10:55 ` [PATCH v2 06/10] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 07/10] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 08/10] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-11-18 10:55 ` [PATCH v2 09/10] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-11-18 10:55 ` [PATCH v2 10/10] dt-bindings: Add DSIv2 documentation Archit Taneja
2015-11-18 13:18 ` Rob Herring
2015-11-18 15:24 ` Archit Taneja
[not found] ` <564C981F.3040907-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2015-11-20 19:59 ` Rob Herring
2015-11-23 6:13 ` Archit Taneja
2015-12-02 8:20 ` Stephen Boyd
2015-12-02 8:34 ` Stephen Boyd
2015-12-07 6:51 ` Archit Taneja
2015-12-02 9:56 ` Archit Taneja
2015-12-03 7:16 ` Stephen Boyd
2015-12-03 11:11 ` Archit Taneja
2015-12-01 9:59 ` [PATCH v3 00/12] drm/msm/dsi: Add support for DSI on MSM8960/APQ8064 Archit Taneja
2015-12-01 9:59 ` [PATCH v3 01/12] drm/msm/dsi: Don't get byte/pixel source clocks from DT Archit Taneja
2015-12-01 10:00 ` [PATCH v3 02/12] drm/msm/dsi: Add support for 28nm PHY on 8960 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 03/12] drm/msm/dsi: Add DSI PLL for 28nm 8960 PHY Archit Taneja
2015-12-01 10:00 ` [PATCH v3 04/12] drm/msm/dsi: Use a better way to figure out DSI version Archit Taneja
2015-12-01 10:00 ` [PATCH v3 05/12] drm/msm/dsi: Delay dsi_clk_init Archit Taneja
2015-12-01 10:00 ` [PATCH v3 06/12] drm/msm/dsi: Parse bus clocks from a list Archit Taneja
2015-12-01 10:00 ` [PATCH v3 07/12] drm/msm/dsi: Set up link clocks for DSIv2 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 08/12] drm/msm/dsi: Add dsi_cfg for APQ8064 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 09/12] drm/msm/dsi: Don't use iommu for command TX buffer for DSIv2 Archit Taneja
2015-12-01 10:00 ` [PATCH v3 10/12] drm/msm/dsi: Enable MMSS SPFB port via syscon Archit Taneja
2015-12-01 10:00 ` [PATCH v3 11/12] dt-bindings: msm/dsi: Fix the order in which clocks are listed Archit Taneja
2015-12-04 14:45 ` Rob Herring
2015-12-01 10:00 ` [PATCH v3 12/12] dt-bindings: msm/dsi: Add DSIv2 documentation Archit Taneja
2015-12-04 14:46 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444827544-25656-12-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hali@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).