From: Matthew McClintock <mmcclint-A+ZNKFmMK5xy9aJCnZT0Uw@public.gmane.org>
To: Andy Gross <agross-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Matthew McClintock
<mmcclint-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
qca-upstream.external-A+ZNKFmMK5xy9aJCnZT0Uw@public.gmane.org,
Varadarajan Narayanan
<varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH v2 4/5] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC
Date: Mon, 16 Nov 2015 15:02:04 -0600 [thread overview]
Message-ID: <1447707725-19449-4-git-send-email-mmcclint@qca.qualcomm.com> (raw)
In-Reply-To: <1447707725-19449-1-git-send-email-mmcclint-A+ZNKFmMK5xy9aJCnZT0Uw@public.gmane.org>
From: Matthew McClintock <mmcclint-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Add initial dts files and SoC support for IPQ4019
Signed-off-by: Varadarajan Narayanan <varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
v2 - add sleep_clk
arch/arm/boot/dts/qcom-ipq4019.dtsi | 115 ++++++++++++++++++++++++++++++++++++
1 file changed, 115 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq4019.dtsi
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
new file mode 100644
index 0000000..fc73822
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -0,0 +1,115 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019";
+ compatible = "qcom,ipq4019";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ clocks = <&gcc GCC_APPS_CLK_SRC>;
+ };
+ };
+
+ clocks {
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0b000000 0x1000>,
+ <0x0b002000 0x1000>;
+ };
+
+ gcc: clock-controller@1800000 {
+ compatible = "qcom,gcc-ipq4019";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x1800000 0x60000>;
+ };
+
+ tlmm: pinctrl@0x01000000 {
+ compatible = "qcom,ipq4019-pinctrl";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+ };
+
+ serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
+ interrupts = <0 107 0>;
+ status = "disabled";
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ serial@78b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b0000 0x200>;
+ interrupts = <0 108 0>;
+ status = "disabled";
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
+ };
+};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-11-16 21:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1446758697-31198-1-git-send-email-mmcclint@codeaurora.org>
2015-11-16 21:02 ` [PATCH v2 1/5] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Matthew McClintock
2015-11-16 21:02 ` [PATCH v2 2/5] clk: qcom: Add IPQ4019 Global Clock Controller support Matthew McClintock
2015-11-16 21:30 ` kbuild test robot
2015-11-16 21:02 ` [PATCH v2 3/5] ARM: qcom: add IPQ4019 compatible match Matthew McClintock
2015-11-18 4:15 ` Andy Gross
[not found] ` <1447707725-19449-1-git-send-email-mmcclint-A+ZNKFmMK5xy9aJCnZT0Uw@public.gmane.org>
2015-11-16 21:02 ` Matthew McClintock [this message]
2015-11-16 21:02 ` [PATCH v2 5/5] dts: ipq4019: Add support for IPQ4019 DK01 board Matthew McClintock
2015-11-16 23:21 ` [PATCH v2 1/5] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447707725-19449-4-git-send-email-mmcclint@qca.qualcomm.com \
--to=mmcclint-a+znkfmmk5xy9ajcnzt0uw@public.gmane.org \
--cc=agross-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mmcclint-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=qca-upstream.external-A+ZNKFmMK5xy9aJCnZT0Uw@public.gmane.org \
--cc=varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox