From: Archit Taneja <architt@codeaurora.org>
To: dri-devel@lists.freedesktop.org, robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org, Archit Taneja <architt@codeaurora.org>
Subject: [PATCH 6/6] drm/msm/adreno: Remove CONFIG_OF checks
Date: Wed, 18 Nov 2015 16:49:07 +0530 [thread overview]
Message-ID: <1447845547-6801-7-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1447845547-6801-1-git-send-email-architt@codeaurora.org>
Remove CONFIG_OF checks in adreno_device.c. The downstream bus scaling
stuff is included only when CONFIG_OF is not set. So, remove that too.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/adreno/adreno_device.c | 52 ------------------------------
1 file changed, 52 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c
index 1ea2df5..950d27d 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_device.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_device.c
@@ -19,10 +19,6 @@
#include "adreno_gpu.h"
-#if defined(DOWNSTREAM_CONFIG_MSM_BUS_SCALING) && !defined(CONFIG_OF)
-# include <mach/kgsl.h>
-#endif
-
#define ANY_ID 0xff
bool hang_debug = false;
@@ -168,7 +164,6 @@ static void set_gpu_pdev(struct drm_device *dev,
static int adreno_bind(struct device *dev, struct device *master, void *data)
{
static struct adreno_platform_config config = {};
-#ifdef CONFIG_OF
struct device_node *child, *node = dev->of_node;
u32 val;
int ret;
@@ -205,53 +200,6 @@ static int adreno_bind(struct device *dev, struct device *master, void *data)
return -ENXIO;
}
-#else
- struct kgsl_device_platform_data *pdata = dev->platform_data;
- uint32_t version = socinfo_get_version();
- if (cpu_is_apq8064ab()) {
- config.fast_rate = 450000000;
- config.slow_rate = 27000000;
- config.bus_freq = 4;
- config.rev = ADRENO_REV(3, 2, 1, 0);
- } else if (cpu_is_apq8064()) {
- config.fast_rate = 400000000;
- config.slow_rate = 27000000;
- config.bus_freq = 4;
-
- if (SOCINFO_VERSION_MAJOR(version) == 2)
- config.rev = ADRENO_REV(3, 2, 0, 2);
- else if ((SOCINFO_VERSION_MAJOR(version) == 1) &&
- (SOCINFO_VERSION_MINOR(version) == 1))
- config.rev = ADRENO_REV(3, 2, 0, 1);
- else
- config.rev = ADRENO_REV(3, 2, 0, 0);
-
- } else if (cpu_is_msm8960ab()) {
- config.fast_rate = 400000000;
- config.slow_rate = 320000000;
- config.bus_freq = 4;
-
- if (SOCINFO_VERSION_MINOR(version) == 0)
- config.rev = ADRENO_REV(3, 2, 1, 0);
- else
- config.rev = ADRENO_REV(3, 2, 1, 1);
-
- } else if (cpu_is_msm8930()) {
- config.fast_rate = 400000000;
- config.slow_rate = 27000000;
- config.bus_freq = 3;
-
- if ((SOCINFO_VERSION_MAJOR(version) == 1) &&
- (SOCINFO_VERSION_MINOR(version) == 2))
- config.rev = ADRENO_REV(3, 0, 5, 2);
- else
- config.rev = ADRENO_REV(3, 0, 5, 0);
-
- }
-# ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
- config.bus_scale_table = pdata->bus_scale_table;
-# endif
-#endif
dev->platform_data = &config;
set_gpu_pdev(dev_get_drvdata(master), to_platform_device(dev));
return 0;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2015-11-18 11:19 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-18 11:19 [PATCH 0/6] drm/msm: Work only with DT supported kernels Archit Taneja
2015-11-18 11:19 ` [PATCH 1/6] drm/msm: Remove non-DT code in msm_drv Archit Taneja
2015-11-18 11:19 ` [PATCH 2/6] drm/msm: Update compatible strings for mdp Archit Taneja
2015-11-18 11:19 ` [PATCH 3/6] dt-bindings: drm/msm: Update MDP bindings Archit Taneja
2015-11-18 15:26 ` Archit Taneja
2015-11-18 11:19 ` [PATCH 4/6] drm/msm/mdp: Remove CONFIG_OF checks from MDP drivers Archit Taneja
2015-11-18 11:19 ` [PATCH 5/6] drm/msm/hdmi: remove CONFIG_OF checks Archit Taneja
2015-11-18 11:19 ` Archit Taneja [this message]
2015-11-18 14:45 ` [PATCH 6/6] drm/msm/adreno: Remove " Rob Clark
2015-11-18 16:04 ` Archit Taneja
2015-11-18 20:29 ` Rob Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447845547-6801-7-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox