linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Archit Taneja <architt@codeaurora.org>
To: robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH 01/13] drm/msm/dsi: Create separate Makefile/Kconfig
Date: Thu, 21 Jan 2016 12:39:29 +0530	[thread overview]
Message-ID: <1453360181-31738-2-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1453360181-31738-1-git-send-email-architt@codeaurora.org>

The msm Makefile and Kconfig are getting conjusted. Move out
the DSI related stuff into separate Kconfig and Makefile.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/msm/Kconfig      | 40 +---------------------------------------
 drivers/gpu/drm/msm/Makefile     | 22 ++++------------------
 drivers/gpu/drm/msm/dsi/Kconfig  | 40 ++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/msm/dsi/Makefile | 13 +++++++++++++
 4 files changed, 58 insertions(+), 57 deletions(-)
 create mode 100644 drivers/gpu/drm/msm/dsi/Kconfig
 create mode 100644 drivers/gpu/drm/msm/dsi/Makefile

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 215495c..27d3aed 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -23,42 +23,4 @@ config DRM_MSM_REGISTER_LOGGING
 	  that can be parsed by envytools demsm tool.  If enabled, register
 	  logging can be switched on via msm.reglog=y module param.
 
-config DRM_MSM_DSI
-	bool "Enable DSI support in MSM DRM driver"
-	depends on DRM_MSM
-	select DRM_PANEL
-	select DRM_MIPI_DSI
-	default y
-	help
-	  Choose this option if you have a need for MIPI DSI connector
-	  support.
-
-config DRM_MSM_DSI_PLL
-	bool "Enable DSI PLL driver in MSM DRM"
-	depends on DRM_MSM_DSI && COMMON_CLK
-	default y
-	help
-	  Choose this option to enable DSI PLL driver which provides DSI
-	  source clocks under common clock framework.
-
-config DRM_MSM_DSI_28NM_PHY
-	bool "Enable DSI 28nm PHY driver in MSM DRM"
-	depends on DRM_MSM_DSI
-	default y
-	help
-	  Choose this option if the 28nm DSI PHY is used on the platform.
-
-config DRM_MSM_DSI_20NM_PHY
-	bool "Enable DSI 20nm PHY driver in MSM DRM"
-	depends on DRM_MSM_DSI
-	default y
-	help
-	  Choose this option if the 20nm DSI PHY is used on the platform.
-
-config DRM_MSM_DSI_28NM_8960_PHY
-	bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
-	depends on DRM_MSM_DSI
-	default y
-	help
-	  Choose this option if the 28nm DSI PHY 8960 variant is used on the
-	  platform.
+source "drivers/gpu/drm/msm/dsi/Kconfig"
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 065ad41..7ac7221 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -1,5 +1,4 @@
 ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
-ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
 
 msm-y := \
 	adreno/adreno_device.o \
@@ -50,25 +49,12 @@ msm-y := \
 	msm_rd.o \
 	msm_ringbuffer.o
 
+msm-$(CONFIG_DRM_MSM_DSI) += mdp/mdp4/mdp4_dsi_encoder.o \
+			     mdp/mdp5/mdp5_cmd_encoder.o
+
 msm-$(CONFIG_DRM_FBDEV_EMULATION) += msm_fbdev.o
 msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
 
-msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
-			mdp/mdp4/mdp4_dsi_encoder.o \
-			dsi/dsi_cfg.o \
-			dsi/dsi_host.o \
-			dsi/dsi_manager.o \
-			dsi/phy/dsi_phy.o \
-			mdp/mdp5/mdp5_cmd_encoder.o
-
-msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
-msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
-msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/phy/dsi_phy_28nm_8960.o
-
-ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
-msm-y += dsi/pll/dsi_pll.o
-msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
-msm-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += dsi/pll/dsi_pll_28nm_8960.o
-endif
+obj-$(CONFIG_DRM_MSM_DSI) += dsi/
 
 obj-$(CONFIG_DRM_MSM)	+= msm.o
diff --git a/drivers/gpu/drm/msm/dsi/Kconfig b/drivers/gpu/drm/msm/dsi/Kconfig
new file mode 100644
index 0000000..91dcf21
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/Kconfig
@@ -0,0 +1,40 @@
+config DRM_MSM_DSI
+	bool "Enable DSI support in MSM DRM driver"
+	depends on DRM_MSM
+	select DRM_PANEL
+	select DRM_MIPI_DSI
+	default y
+	help
+	  Choose this option if you have a need for MIPI DSI connector
+	  support.
+
+if DRM_MSM_DSI
+
+config DRM_MSM_DSI_PLL
+	bool "Enable DSI PLL driver in MSM DRM"
+	default y
+	help
+	  Choose this option to enable DSI PLL driver which provides DSI
+	  source clocks under common clock framework.
+
+config DRM_MSM_DSI_28NM_PHY
+	bool "Enable DSI 28nm PHY driver in MSM DRM"
+	default y
+	help
+	  Choose this option if the 28nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_20NM_PHY
+	bool "Enable DSI 20nm PHY driver in MSM DRM"
+	default y
+	help
+	  Choose this option if the 20nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_28NM_8960_PHY
+	bool "Enable DSI 28nm 8960 PHY driver in MSM DRM"
+	depends on DRM_MSM_DSI
+	default y
+	help
+	  Choose this option if the 28nm DSI PHY 8960 variant is used on the
+	  platform.
+
+endif
diff --git a/drivers/gpu/drm/msm/dsi/Makefile b/drivers/gpu/drm/msm/dsi/Makefile
new file mode 100644
index 0000000..26c8fb6
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/Makefile
@@ -0,0 +1,13 @@
+ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm -Idrivers/gpu/drm/msm/dsi
+
+obj-y := dsi.o dsi_cfg.o dsi_host.o dsi_manager.o phy/dsi_phy.o
+
+obj-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += phy/dsi_phy_28nm.o
+obj-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += phy/dsi_phy_20nm.o
+obj-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += phy/dsi_phy_28nm_8960.o
+
+ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
+obj-y += pll/dsi_pll.o
+obj-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += pll/dsi_pll_28nm.o
+obj-$(CONFIG_DRM_MSM_DSI_28NM_8960_PHY) += pll/dsi_pll_28nm_8960.o
+endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2016-01-21  7:09 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-21  7:09 [PATCH 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
2016-01-21  7:09 ` Archit Taneja [this message]
2016-01-21  7:09 ` [PATCH 02/13] drm/msm/hdmi: Create separate Makefile/Kconfig Archit Taneja
2016-01-21  7:09 ` [PATCH 03/13] drm/msm/edp: " Archit Taneja
2016-01-21  7:09 ` [PATCH 04/13] drm/msm/hdmi: Clean up connector gpio usage Archit Taneja
2016-01-21  7:09 ` [PATCH 05/13] drm/msm/hdmi: Fix connector detect when there is no hpd gpio Archit Taneja
2016-01-21  7:09 ` [PATCH 06/13] drm/msm/hdmi: Update generated headers to split PHY/PLL offsets Archit Taneja
2016-01-21  7:09 ` [PATCH 07/13] drm/msm/hdmi: Create a separate hdmi phy driver Archit Taneja
2016-01-21  7:09 ` [PATCH 08/13] drm/msm/hdmi: Make hdmi core get its phy Archit Taneja
2016-01-21  7:09 ` [PATCH 09/13] drm/msm/hdmi: Manage hdmi PLL through phy driver Archit Taneja
2016-01-21  7:09 ` [PATCH 10/13] drm/msm/hdmi: Convert phy files according to new design Archit Taneja
2016-01-21  7:09 ` [PATCH 11/13] drm/msm/hdmi: Update generated headers for hdmi 8996 phy Archit Taneja
2016-01-21  7:09 ` [PATCH 12/13] drm/msm/hdmi: HDMI 8996 PHY/PLL support Archit Taneja
2016-01-21  7:09 ` [PATCH 13/13] dt/bindings: drm/msm/hdmi: Add hdmi phy bindings Archit Taneja
2016-01-21 23:26   ` Rob Herring
2016-01-25  7:40     ` Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453360181-31738-2-git-send-email-architt@codeaurora.org \
    --to=architt@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=robdclark@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).