linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Archit Taneja <architt@codeaurora.org>
To: dri-devel@lists.freedesktop.org
Cc: andy.green@linaro.org, linux-arm-msm@vger.kernel.org,
	amit.kucheria@linaro.org, srinivas.kandagatla@linaro.org,
	laurent.pinchart@ideasonboard.com, treding@nvidia.com
Subject: [PATCH v3 5/7] drm/i2c: adv7511: Use internal timing generator
Date: Wed,  9 Mar 2016 16:27:16 +0530	[thread overview]
Message-ID: <1457521038-5906-6-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1457521038-5906-1-git-send-email-architt@codeaurora.org>

ADV7533 provides an internal timing generator for certain modes that it
can't use the DSI clock directly.

We've observed that HDMI is more stable with the internal timing
generator, especially if there are instabilities in the DSI clock source.
The data spec also seems to recommend the usage of the timing generator
for all modes.

However, on some platforms, it's reported that enabling the timing
generator causes instabilities with the HDMI output.

Create a DT parameter that lets a platform explicitly disable the timing
generator. The timing generator is enabled by default.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 drivers/gpu/drm/i2c/adv7511.c | 65 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 63 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
index 6c2a89a..88918ae 100644
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -39,6 +39,8 @@ struct adv7511 {
 	enum drm_connector_status status;
 	bool powered;
 
+	struct drm_display_mode curr_mode;
+
 	unsigned int f_tmds;
 
 	unsigned int current_edid_segment;
@@ -62,6 +64,7 @@ struct adv7511 {
 	struct device_node *host_node;
 	struct mipi_dsi_device *dsi;
 	u8 num_dsi_lanes;
+	bool use_timing_gen;
 
 	enum adv7511_type type;
 };
@@ -397,14 +400,65 @@ static void adv7511_set_link_config(struct adv7511 *adv7511,
 	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
 }
 
+static void adv7511_dsi_config_timing_gen(struct adv7511 *adv)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+	struct drm_display_mode *mode = &adv->curr_mode;
+	unsigned int hsw, hfp, hbp, vsw, vfp, vbp;
+	u8 clock_div_by_lanes[] = { 6, 4, 3 };	/* 2, 3, 4 lanes */
+
+	hsw = mode->hsync_end - mode->hsync_start;
+	hfp = mode->hsync_start - mode->hdisplay;
+	hbp = mode->htotal - mode->hsync_end;
+	vsw = mode->vsync_end - mode->vsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	/* set pixel clock divider mode */
+	regmap_write(adv->regmap_cec, 0x16,
+		     clock_div_by_lanes[dsi->lanes - 2] << 3);
+
+	/* horizontal porch params */
+	regmap_write(adv->regmap_cec, 0x28, mode->htotal >> 4);
+	regmap_write(adv->regmap_cec, 0x29, (mode->htotal << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2a, hsw >> 4);
+	regmap_write(adv->regmap_cec, 0x2b, (hsw << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2c, hfp >> 4);
+	regmap_write(adv->regmap_cec, 0x2d, (hfp << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2e, hbp >> 4);
+	regmap_write(adv->regmap_cec, 0x2f, (hbp << 4) & 0xff);
+
+	/* vertical porch params */
+	regmap_write(adv->regmap_cec, 0x30, mode->vtotal >> 4);
+	regmap_write(adv->regmap_cec, 0x31, (mode->vtotal << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x32, vsw >> 4);
+	regmap_write(adv->regmap_cec, 0x33, (vsw << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x34, vfp >> 4);
+	regmap_write(adv->regmap_cec, 0x35, (vfp << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x36, vbp >> 4);
+	regmap_write(adv->regmap_cec, 0x37, (vbp << 4) & 0xff);
+}
+
 static void adv7533_dsi_power_on(struct adv7511 *adv)
 {
 	struct mipi_dsi_device *dsi = adv->dsi;
 
+	if (adv->use_timing_gen)
+		adv7511_dsi_config_timing_gen(adv);
+
 	/* set number of dsi lanes */
 	regmap_write(adv->regmap_cec, 0x1c, dsi->lanes << 4);
-	/* disable internal timing generator */
-	regmap_write(adv->regmap_cec, 0x27, 0x0b);
+
+	if (adv->use_timing_gen) {
+		/* reset internal timing generator */
+		regmap_write(adv->regmap_cec, 0x27, 0xcb);
+		regmap_write(adv->regmap_cec, 0x27, 0x8b);
+		regmap_write(adv->regmap_cec, 0x27, 0xcb);
+	} else {
+		/* disable internal timing generator */
+		regmap_write(adv->regmap_cec, 0x27, 0x0b);
+	}
+
 	/* enable hdmi */
 	regmap_write(adv->regmap_cec, 0x03, 0x89);
 	/* disable test mode */
@@ -459,6 +513,8 @@ static void adv7533_dsi_power_off(struct adv7511 *adv)
 {
 	/* disable hdmi */
 	regmap_write(adv->regmap_cec, 0x03, 0x0b);
+	/* disable internal timing generator */
+	regmap_write(adv->regmap_cec, 0x27, 0x0b);
 }
 
 static void adv7511_power_off(struct adv7511 *adv7511)
@@ -807,6 +863,8 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
 	regmap_update_bits(adv7511->regmap, 0x17,
 		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
 
+	drm_mode_copy(&adv7511->curr_mode, adj_mode);
+
 	/*
 	 * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
 	 * supposed to give better results.
@@ -1094,6 +1152,9 @@ static int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
 	of_node_put(endpoint);
 	of_node_put(adv->host_node);
 
+	adv->use_timing_gen = !of_property_read_bool(np,
+						"adi,disable-timing-generator");
+
 	/* TODO: Check if these need to be parsed by DT or not */
 	adv->rgb = true;
 	adv->embedded_sync = false;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2016-03-09 10:57 UTC|newest]

Thread overview: 89+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-27  6:16 [PATCH 0/5] drm/i2c: adv7511: ADV7533 support Archit Taneja
2015-07-27  6:16 ` [PATCH 1/5] drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2015-07-27  6:16 ` [PATCH 2/5] drm/i2c: adv7511: Initial support for adv7533 Archit Taneja
2015-07-28  3:27   ` Bjorn Andersson
2015-08-03  5:39     ` Archit Taneja
2015-07-27  6:16 ` [PATCH 3/5] drm/i2c: adv7511: Refactor encoder slave functions Archit Taneja
2015-07-27  8:59   ` Laurent Pinchart
2015-07-28  8:17     ` Archit Taneja
2015-07-28 14:38       ` Boris Brezillon
2015-07-31  5:26         ` Archit Taneja
2015-07-31  9:12           ` Boris Brezillon
2015-07-31 10:38             ` Archit Taneja
2015-07-31 12:13             ` Rob Clark
2015-07-31 12:58               ` Boris Brezillon
2015-07-31 14:48                 ` Rob Clark
2015-08-03 12:03                   ` Andrzej Hajda
2015-08-03 14:04                     ` Rob Clark
2015-08-04  5:16                       ` Andrzej Hajda
2015-08-04 12:24                         ` Rob Clark
2015-09-02  6:30                           ` Archit Taneja
2015-12-03 15:02     ` Rob Clark
2015-12-03 15:28       ` Laurent Pinchart
2015-12-03 15:55         ` Rob Clark
2015-12-03 16:06           ` Laurent Pinchart
2015-12-03 16:11           ` Archit Taneja
2016-01-09 17:03             ` Archit Taneja
2015-07-27  6:16 ` [PATCH 4/5] drm/i2c: adv7511: Add drm_bridge/connector for ADV7533 Archit Taneja
2015-07-27  6:16 ` [PATCH 5/5] drm/i2c: adv7511: Create mipi_dsi_device " Archit Taneja
2015-09-07 11:36 ` [PATCH v2 0/5] drm/i2c: adv7511: ADV7533 support Archit Taneja
2015-09-07 11:36   ` [PATCH v2 1/5] drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2015-09-07 11:36   ` [PATCH v2 2/5] drm/i2c: adv7511: Initial support for adv7533 Archit Taneja
2015-09-07 11:36   ` [PATCH v2 3/5] drm/i2c: adv7511: Refactor encoder slave functions Archit Taneja
2015-09-07 11:36   ` [PATCH v2 4/5] drm/i2c: adv7511: Add drm_bridge/connector for ADV7533 Archit Taneja
2015-09-07 11:36   ` [PATCH v2 5/5] drm/i2c: adv7511: Add dsi driver for adv7533 Archit Taneja
2016-03-09 10:57   ` [PATCH v3 0/7] drm/i2c: adv7511: ADV7533 support Archit Taneja
2016-03-09 10:57     ` [PATCH v3 1/7] drm/i2c: adv7511: Convert to drm_bridge Archit Taneja
2016-03-09 10:57     ` [PATCH v3 2/7] drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2016-03-09 10:57     ` [PATCH v3 3/7] drm/i2c: adv7511: Initial support for ADV7533 Archit Taneja
2016-03-09 10:57     ` [PATCH v3 4/7] drm/i2c: adv7511: Create a MIPI DSI device Archit Taneja
2016-04-21 22:29       ` Laurent Pinchart
2016-04-22  5:10         ` Archit Taneja
2016-05-03  6:57           ` Archit Taneja
2016-05-09 20:38             ` Laurent Pinchart
2016-05-11 10:19               ` Archit Taneja
2016-03-09 10:57     ` Archit Taneja [this message]
2016-03-09 10:57     ` [PATCH v3 6/7] drm/i2c: adv7511: Change number of DSI lanes dynamically Archit Taneja
     [not found]     ` <1457521038-5906-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-03-09 10:57       ` [PATCH v3 7/7] dt-bindings: drm/bridge: Update bindings for ADV7533 Archit Taneja
2016-03-17 19:12         ` Rob Herring
2016-04-21 22:32         ` Laurent Pinchart
2016-04-22  5:40           ` Archit Taneja
     [not found]             ` <5719B942.8070907-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-05-16 12:01               ` Laurent Pinchart
2016-05-17  3:43                 ` Archit Taneja
2016-05-17  4:18                   ` Xinliang Liu
2016-05-24  5:15                     ` Archit Taneja
2016-04-14 14:56     ` [PATCH v3 0/7] drm/i2c: adv7511: ADV7533 support Archit Taneja
2016-04-21 22:33       ` Laurent Pinchart
2016-04-22  5:45         ` Archit Taneja
2016-04-17 11:31     ` Xinliang Liu
2016-04-18  9:48       ` Archit Taneja
2016-04-19  8:44         ` Xinliang Liu
2016-04-21 22:36         ` Laurent Pinchart
2016-04-22  5:44           ` Archit Taneja
2016-05-03  1:52     ` Xinliang Liu
2016-05-03  6:53       ` Archit Taneja
2016-05-16 10:41     ` [PATCH v4 " Archit Taneja
2016-05-16 10:41       ` [PATCH v4 1/7] drm/i2c: adv7511: Convert to drm_bridge Archit Taneja
2016-05-16 10:41       ` [PATCH v4 2/7] drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2016-05-16 10:41       ` [PATCH v4 3/7] drm/i2c: adv7511: Initial support for ADV7533 Archit Taneja
2016-05-16 10:41       ` [PATCH v4 4/7] drm/i2c: adv7533: Create a MIPI DSI device Archit Taneja
2016-05-16 10:41       ` [PATCH v4 5/7] drm/i2c: adv7533: Use internal timing generator Archit Taneja
2016-05-16 10:41       ` [PATCH v4 6/7] drm/i2c: adv7533: Change number of DSI lanes dynamically Archit Taneja
2016-05-16 10:41       ` [PATCH v4 7/7] dt-bindings: drm/bridge: Update bindings for ADV7533 Archit Taneja
2016-06-08 10:27       ` [PATCH v5 0/7] drm/i2c: adv7511: ADV7533 support Archit Taneja
2016-06-08 10:27         ` [PATCH v5 1/7] drm/i2c: adv7511: Convert to drm_bridge Archit Taneja
2016-06-08 10:27         ` [PATCH v5 2/7] drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2016-06-08 10:27         ` [PATCH v5 3/7] drm/i2c: adv7511: Initial support for ADV7533 Archit Taneja
2016-06-08 10:27         ` [PATCH v5 4/7] drm/i2c: adv7533: Create a MIPI DSI device Archit Taneja
2016-06-08 10:27         ` [PATCH v5 5/7] drm/i2c: adv7533: Use internal timing generator Archit Taneja
2016-06-08 10:27         ` [PATCH v5 6/7] drm/i2c: adv7533: Change number of DSI lanes dynamically Archit Taneja
2016-06-08 10:27         ` [PATCH v5 7/7] dt-bindings: drm/bridge: Update bindings for ADV7533 Archit Taneja
2016-06-17  7:53         ` [PATCH v6 0/8] drm/i2c: adv7511: ADV7533 support Archit Taneja
2016-06-17  7:53           ` [PATCH v6 1/8] drm/i2c: adv7511: Convert to drm_bridge Archit Taneja
2016-06-17  7:53           ` [PATCH v6 2/8] drm/i2c: adv7511: Move to bridge folder Archit Taneja
2016-06-17  7:53           ` [PATCH v6 3/8] drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled Archit Taneja
2016-06-17  7:53           ` [PATCH v6 4/8] drm/bridge: adv7533: Initial support for ADV7533 Archit Taneja
2016-06-17  7:53           ` [PATCH v6 5/8] drm/bridge: adv7533: Create a MIPI DSI device Archit Taneja
2016-06-17  7:53           ` [PATCH v6 6/8] drm/bridge: adv7533: Use internal timing generator Archit Taneja
2016-06-17  7:53           ` [PATCH v6 7/8] drm/bridge: adv7533: Change number of DSI lanes dynamically Archit Taneja
2016-06-17  7:53           ` [PATCH v6 8/8] dt-bindings: drm/bridge: Update bindings for ADV7533 Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1457521038-5906-6-git-send-email-architt@codeaurora.org \
    --to=architt@codeaurora.org \
    --cc=amit.kucheria@linaro.org \
    --cc=andy.green@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).