From: Archit Taneja <architt@codeaurora.org>
To: robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org,
Stephen Boyd <sboyd@codeaurora.org>,
dri-devel@lists.freedesktop.org
Subject: [PATCH v2 2/2] drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks
Date: Thu, 27 Oct 2016 11:57:15 +0530 [thread overview]
Message-ID: <1477549635-21104-1-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1477378080-16087-3-git-send-email-architt@codeaurora.org>
The DSI/HDMI PLLs in MSM require resources like interface clocks, power
domains to be enabled before we can access their registers.
The clock framework doesn't have a mechanism at the moment where we can
tie such resources to a clock, so we make sure that the KMS driver enables
these resources whenever a PLL is expected to be in use.
One place where we can't ensure the resource dependencies are met is when
the clock framework tries to disable unused clocks. The KMS driver doesn't
know when the clock framework calls the is_enabled clk_op, and hence can't
enable interface clocks/power domains beforehand.
We set the CLK_IGNORE_UNUSED flag for PLL clocks for now. This needs to be
revisited, since bootloaders can enable display, and we would want to
disable the PLL clocks if there isn't a display driver using them.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 1 +
drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 1 +
drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c | 1 +
drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 1 +
4 files changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
index 598fdaf..26e3a01 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c
@@ -521,6 +521,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
.parent_names = (const char *[]){ "xo" },
.num_parents = 1,
.name = vco_name,
+ .flags = CLK_IGNORE_UNUSED,
.ops = &clk_ops_dsi_pll_28nm_vco,
};
struct device *dev = &pll_28nm->pdev->dev;
diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
index 38c90e1..4900845 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c
@@ -412,6 +412,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm)
struct clk_init_data vco_init = {
.parent_names = (const char *[]){ "pxo" },
.num_parents = 1,
+ .flags = CLK_IGNORE_UNUSED,
.ops = &clk_ops_dsi_pll_28nm_vco,
};
struct device *dev = &pll_28nm->pdev->dev;
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c
index aa94a55..143eab4 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c
@@ -702,6 +702,7 @@ static int hdmi_8996_pll_is_enabled(struct clk_hw *hw)
.ops = &hdmi_8996_pll_ops,
.parent_names = hdmi_pll_parents,
.num_parents = ARRAY_SIZE(hdmi_pll_parents),
+ .flags = CLK_IGNORE_UNUSED,
};
int msm_hdmi_pll_8996_init(struct platform_device *pdev)
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
index 92da69a..9959075 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
@@ -424,6 +424,7 @@ static int hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
.ops = &hdmi_pll_ops,
.parent_names = hdmi_pll_parents,
.num_parents = ARRAY_SIZE(hdmi_pll_parents),
+ .flags = CLK_IGNORE_UNUSED,
};
int msm_hdmi_pll_8960_init(struct platform_device *pdev)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2016-10-27 6:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-25 6:47 [PATCH 0/2] drm/msm: Fixes for issues seen on DB410c Archit Taneja
2016-10-25 6:47 ` [PATCH 1/2] drm/msm/dsi: Queue HPD helper work in attach/detach callbacks Archit Taneja
2016-10-25 6:48 ` [PATCH 2/2] drm/msm: Don't provide 'is_enabled' PLL clk_ops Archit Taneja
2016-10-25 20:28 ` Stephen Boyd
2016-10-26 7:36 ` Archit Taneja
2016-10-27 6:27 ` Archit Taneja [this message]
2016-10-27 23:58 ` [PATCH v2 2/2] drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477549635-21104-1-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).