From mboxrd@z Thu Jan 1 00:00:00 1970 From: Linus Walleij Subject: [PATCH 2/3 v4] ARM: dts: reference PM8058 as IRQ parent Date: Mon, 7 Nov 2016 09:44:43 +0100 Message-ID: <1478508284-10847-2-git-send-email-linus.walleij@linaro.org> References: <1478508284-10847-1-git-send-email-linus.walleij@linaro.org> Return-path: Received: from mail-lf0-f52.google.com ([209.85.215.52]:35817 "EHLO mail-lf0-f52.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750981AbcKGIox (ORCPT ); Mon, 7 Nov 2016 03:44:53 -0500 Received: by mail-lf0-f52.google.com with SMTP id b14so107275454lfg.2 for ; Mon, 07 Nov 2016 00:44:53 -0800 (PST) In-Reply-To: <1478508284-10847-1-git-send-email-linus.walleij@linaro.org> Sender: linux-arm-msm-owner@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org To: linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson Cc: Stephen Boyd , David Brown , Linus Walleij Some nodes are referencing the pm8058_gpio as IRQ parent, but the HW IRQ offset they are supplying is actually that for the parent to that controller: the PM8058 itself. Since that is the proper parent, reference it directly. We can switch this to the pm8058_gpio and the proper offset once we have fixed the SSBI GPIO driver to properly deal with the hierarchical IRQ domain and get proper local offset translation. Acked-by: Bjorn Andersson Signed-off-by: Linus Walleij --- ChangeLog v1->v2: - Add Bjorn's ACK. - Follow version numbering of the primary patch. --- arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 4a532ddab53a..ea660ffa03ea 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -369,8 +369,8 @@ ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - /* GPIO33 has interrupt 224 on the PM8058 */ - interrupt-parent = <&pm8058_gpio>; + /* FIXME: GPIO33 has interrupt 224 on the PM8058 */ + interrupt-parent = <&pm8058>; interrupts = <224 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&dragon_ak8975_gpios>; @@ -380,8 +380,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; - /* GPIO16 has interrupt 207 on the PM8058 */ - interrupt-parent = <&pm8058_gpio>; + /* FIXME: GPIO16 has interrupt 207 on the PM8058 */ + interrupt-parent = <&pm8058>; interrupts = <207 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; -- 2.7.4