From: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
To: bjorn.andersson@linaro.org
Cc: sboyd@codeaurora.org, agross@codeaurora.org,
linux-arm-msm@vger.kernel.org,
Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Subject: [RESEND PATCH v4 1/7] remoteproc: qcom: Add and initialize private data for hexagon dsp.
Date: Thu, 24 Nov 2016 15:30:32 +0530 [thread overview]
Message-ID: <1479981638-32069-2-git-send-email-akdwived@codeaurora.org> (raw)
In-Reply-To: <1479981638-32069-1-git-send-email-akdwived@codeaurora.org>
Resource string's specific to version of hexagon chip are initialized
to be passed to probe for various resource init purpose.
Also compatible string introduced are added to documentation.
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
---
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 2 +
drivers/remoteproc/qcom_q6v5_pil.c | 61 +++++++++++++++++++++-
2 files changed, 62 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 57cb49e..d4c14f0 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -8,6 +8,8 @@ on the Qualcomm Hexagon core.
Value type: <string>
Definition: must be one of:
"qcom,q6v5-pil"
+ "qcom,q6v5-5-1-1-pil"
+ "qcom,q6v56-1-5-0-pil"
- reg:
Usage: required
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 2e0caaa..3360312 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -30,6 +30,7 @@
#include <linux/reset.h>
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
+#include <linux/of_device.h>
#include "remoteproc_internal.h"
#include "qcom_mdt_loader.h"
@@ -93,6 +94,22 @@
#define QDSS_BHS_ON BIT(21)
#define QDSS_LDO_BYP BIT(22)
+struct rproc_hexagon_res {
+ char *hexagon_mba_image;
+ char **proxy_reg_string;
+ char **active_reg_string;
+ int proxy_uV_uA[3][2];
+ int active_uV_uA[1][2];
+ char **proxy_clk_string;
+ char **active_clk_string;
+ int hexagon_ver;
+};
+
+struct reg_info {
+ struct regulator *reg;
+ int uV;
+ int uA;
+};
struct q6v5 {
struct device *dev;
struct rproc *rproc;
@@ -131,6 +148,12 @@ struct q6v5 {
};
enum {
+ Q6V5_5_0_0, /*hexagon on msm8916*/
+ Q6V5_5_1_1, /*hexagon on msm8974*/
+ Q5V56_1_5_0, /*hexagon on msm8996*/
+};
+
+enum {
Q6V5_SUPPLY_CX,
Q6V5_SUPPLY_MX,
Q6V5_SUPPLY_MSS,
@@ -890,8 +913,44 @@ static int q6v5_remove(struct platform_device *pdev)
return 0;
}
+static const struct rproc_hexagon_res q6v56_1_5_0_res = {
+ .hexagon_mba_image = "mba.mbn",
+ .proxy_reg_string = (char*[]){"mx", "cx", "pll", NULL},
+ .active_reg_string = NULL,
+ .proxy_uV_uA = { {0, 0}, {0, 100000}, {0, 100000} },
+ .active_uV_uA = { {0} },
+ .proxy_clk_string = (char*[]){"xo", "pnoc", "qdss", NULL},
+ .active_clk_string = (char*[]){"iface", "bus", "mem",
+ "gpll0_mss_clk", "snoc_axi_clk", "mnoc_axi_clk", NULL},
+ .hexagon_ver = Q5V56_1_5_0,
+};
+
+static const struct rproc_hexagon_res q6v5_5_0_0_res = {
+ .hexagon_mba_image = "mba.mbn",
+ .proxy_reg_string = (char*[]){"mx", "cx", "pll", NULL},
+ .proxy_uV_uA = { {1050000, 0}, {0, 100000}, {0, 100000} },
+ .active_reg_string = (char*[]){"mss", NULL},
+ .active_uV_uA = { {1000000, 100000} },
+ .proxy_clk_string = (char*[]){"xo", NULL},
+ .active_clk_string = (char*[]){"iface", "bus", "mem", NULL},
+ .hexagon_ver = Q6V5_5_0_0,
+};
+
+static const struct rproc_hexagon_res q6v5_5_1_1_res = {
+ .hexagon_mba_image = "mba.b00",
+ .proxy_reg_string = (char*[]){"mx", "cx", "pll", NULL},
+ .proxy_uV_uA = { {1050000, 0}, {0, 100000}, {0, 100000} },
+ .active_reg_string = (char*[]){"mss", NULL},
+ .active_uV_uA = { {1000000, 100000} },
+ .proxy_clk_string = (char*[]){"xo", NULL},
+ .active_clk_string = (char*[]){"iface", "bus", "mem", NULL},
+ .hexagon_ver = Q6V5_5_1_1,
+};
+
static const struct of_device_id q6v5_of_match[] = {
- { .compatible = "qcom,q6v5-pil", },
+ { .compatible = "qcom,q6v5-pil", .data = &q6v5_5_0_0_res},
+ { .compatible = "qcom,q6v5-5-1-1-pil", .data = &q6v5_5_1_1_res},
+ { .compatible = "qcom,q6v56-1-5-0-pil", .data = &q6v56_1_5_0_res},
{ },
};
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2016-11-24 10:01 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-24 10:00 [RESEND PATCH v4 0/7]remoteproc: qcom: Add support to hexagon v56 1.5.0 in qcom hexagon rproc driver Avaneesh Kumar Dwivedi
2016-11-24 10:00 ` Avaneesh Kumar Dwivedi [this message]
2016-12-08 21:37 ` [RESEND PATCH v4 1/7] remoteproc: qcom: Add and initialize private data for hexagon dsp Bjorn Andersson
2016-12-09 11:42 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-09 19:32 ` Bjorn Andersson
2016-11-24 10:00 ` [RESEND PATCH v4 2/7] remoteproc: qcom: Initialize proxy and active clock's and regulator's Avaneesh Kumar Dwivedi
2016-12-09 2:36 ` Bjorn Andersson
2016-12-09 15:53 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 3/7] remoteproc: qcom: Modify regulator enable and disable interface Avaneesh Kumar Dwivedi
2016-12-09 2:44 ` Bjorn Andersson
2016-12-12 8:21 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 4/7] remoteproc: qcom: Modify clock enable and disable routine Avaneesh Kumar Dwivedi
2016-12-09 2:57 ` Bjorn Andersson
2016-12-12 8:23 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 5/7] remoteproc: qcom: Modify reset sequence for hexagon to support v56 1.5.0 Avaneesh Kumar Dwivedi
2016-12-09 4:35 ` Bjorn Andersson
2016-12-12 12:45 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-13 18:09 ` Bjorn Andersson
2016-12-13 19:45 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-13 22:07 ` Bjorn Andersson
2016-12-14 15:50 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-14 20:13 ` Bjorn Andersson
2016-11-24 10:00 ` [RESEND PATCH v4 6/7] remoteproc: qcom: Modify stop routine to limit MX current for v56 1.5 Avaneesh Kumar Dwivedi
2016-12-09 4:42 ` Bjorn Andersson
2016-12-12 13:04 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 7/7] clk: qcom: Add GCC_MSS_RESET support to reset MSS in v56 1.5.0 Avaneesh Kumar Dwivedi
2016-12-08 19:51 ` Bjorn Andersson
2016-12-12 13:05 ` Dwivedi, Avaneesh Kumar (avani)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479981638-32069-2-git-send-email-akdwived@codeaurora.org \
--to=akdwived@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).