From: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
To: bjorn.andersson@linaro.org
Cc: sboyd@codeaurora.org, agross@codeaurora.org,
linux-arm-msm@vger.kernel.org,
Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Subject: [RESEND PATCH v4 2/7] remoteproc: qcom: Initialize proxy and active clock's and regulator's
Date: Thu, 24 Nov 2016 15:30:33 +0530 [thread overview]
Message-ID: <1479981638-32069-3-git-send-email-akdwived@codeaurora.org> (raw)
In-Reply-To: <1479981638-32069-1-git-send-email-akdwived@codeaurora.org>
Certain regulators and clocks need voting by rproc on behalf of hexagon
only during restart operation but certain clocks and voltage need to be
voted till hexagon is up, these regulators and clocks are identified as
proxy and active resource whose handle is being obtained by supplying
private proxy and active regulator and clock string.
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
---
drivers/remoteproc/qcom_q6v5_pil.c | 148 +++++++++++++++++++++++++++----------
1 file changed, 107 insertions(+), 41 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 3360312..b0f0fcf 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -37,7 +37,6 @@
#include <linux/qcom_scm.h>
-#define MBA_FIRMWARE_NAME "mba.b00"
#define MPSS_FIRMWARE_NAME "modem.mdt"
#define MPSS_CRASH_REASON_SMEM 421
@@ -132,6 +131,14 @@ struct q6v5 {
struct clk *ahb_clk;
struct clk *axi_clk;
struct clk *rom_clk;
+ struct clk *active_clks[8];
+ struct clk *proxy_clks[4];
+ struct reg_info active_regs[1];
+ struct reg_info proxy_regs[3];
+ int active_reg_count;
+ int proxy_reg_count;
+ int active_clk_count;
+ int proxy_clk_count;
struct completion start_done;
struct completion stop_done;
@@ -160,27 +167,43 @@ enum {
Q6V5_SUPPLY_PLL,
};
-static int q6v5_regulator_init(struct q6v5 *qproc)
+static int q6v5_regulator_init(struct device *dev,
+ struct reg_info *regs, char **reg_str, int volatage_load[][2])
{
- int ret;
+ int reg_count = 0, i;
- qproc->supply[Q6V5_SUPPLY_CX].supply = "cx";
- qproc->supply[Q6V5_SUPPLY_MX].supply = "mx";
- qproc->supply[Q6V5_SUPPLY_MSS].supply = "mss";
- qproc->supply[Q6V5_SUPPLY_PLL].supply = "pll";
+ if (!reg_str)
+ return 0;
- ret = devm_regulator_bulk_get(qproc->dev,
- ARRAY_SIZE(qproc->supply), qproc->supply);
- if (ret < 0) {
- dev_err(qproc->dev, "failed to get supplies\n");
- return ret;
- }
+ while (reg_str[reg_count] != NULL)
+ reg_count++;
- regulator_set_load(qproc->supply[Q6V5_SUPPLY_CX].consumer, 100000);
- regulator_set_load(qproc->supply[Q6V5_SUPPLY_MSS].consumer, 100000);
- regulator_set_load(qproc->supply[Q6V5_SUPPLY_PLL].consumer, 10000);
+ if (!reg_count)
+ return reg_count;
- return 0;
+ if (!regs)
+ return -ENOMEM;
+
+ for (i = 0; i < reg_count; i++) {
+ const char *reg_name;
+
+ reg_name = reg_str[i];
+ regs[i].reg = devm_regulator_get(dev, reg_name);
+ if (IS_ERR(regs[i].reg)) {
+
+ int rc = PTR_ERR(regs[i].reg);
+
+ if (rc != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get %s\n regulator",
+ reg_name);
+ return rc;
+ }
+
+ regs[i].uV = volatage_load[i][0];
+ regs[i].uA = volatage_load[i][1];
+ }
+
+ return reg_count;
}
static int q6v5_regulator_enable(struct q6v5 *qproc)
@@ -725,27 +748,41 @@ static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
return 0;
}
-static int q6v5_init_clocks(struct q6v5 *qproc)
+static int q6v5_init_clocks(struct device *dev, struct clk **clks,
+ char **clk_str)
{
- qproc->ahb_clk = devm_clk_get(qproc->dev, "iface");
- if (IS_ERR(qproc->ahb_clk)) {
- dev_err(qproc->dev, "failed to get iface clock\n");
- return PTR_ERR(qproc->ahb_clk);
- }
+ int clk_count = 0, i;
- qproc->axi_clk = devm_clk_get(qproc->dev, "bus");
- if (IS_ERR(qproc->axi_clk)) {
- dev_err(qproc->dev, "failed to get bus clock\n");
- return PTR_ERR(qproc->axi_clk);
- }
+ if (!clk_str)
+ return 0;
+
+ while (clk_str[clk_count] != NULL)
+ clk_count++;
+
+ if (!clk_count)
+ return clk_count;
+
+ if (!clks)
+ return -ENOMEM;
+
+ for (i = 0; i < clk_count; i++) {
+ const char *clock_name;
+
+ clock_name = clk_str[i];
+ clks[i] = devm_clk_get(dev, clock_name);
+ if (IS_ERR(clks[i])) {
+
+ int rc = PTR_ERR(clks[i]);
+
+ if (rc != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get %s clock\n",
+ clock_name);
+ return rc;
+ }
- qproc->rom_clk = devm_clk_get(qproc->dev, "mem");
- if (IS_ERR(qproc->rom_clk)) {
- dev_err(qproc->dev, "failed to get mem clock\n");
- return PTR_ERR(qproc->rom_clk);
}
- return 0;
+ return clk_count;
}
static int q6v5_init_reset(struct q6v5 *qproc)
@@ -830,10 +867,15 @@ static int q6v5_probe(struct platform_device *pdev)
{
struct q6v5 *qproc;
struct rproc *rproc;
- int ret;
+ const struct rproc_hexagon_res *desc;
+ int ret, count;
+
+ desc = of_device_get_match_data(&pdev->dev);
+ if (!desc)
+ return -EINVAL;
rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_ops,
- MBA_FIRMWARE_NAME, sizeof(*qproc));
+ desc->hexagon_mba_image, sizeof(*qproc));
if (!rproc) {
dev_err(&pdev->dev, "failed to allocate rproc\n");
return -ENOMEM;
@@ -857,18 +899,42 @@ static int q6v5_probe(struct platform_device *pdev)
if (ret)
goto free_rproc;
- ret = q6v5_init_clocks(qproc);
- if (ret)
- goto free_rproc;
+ count = q6v5_init_clocks(&pdev->dev, qproc->proxy_clks,
+ desc->proxy_clk_string);
+ if (count < 0) {
+ dev_err(&pdev->dev, "Failed to setup proxy clocks.\n");
+ return count;
+ }
+ qproc->proxy_clk_count = count;
- ret = q6v5_regulator_init(qproc);
- if (ret)
- goto free_rproc;
+ count = q6v5_init_clocks(&pdev->dev, qproc->active_clks,
+ desc->active_clk_string);
+ if (count < 0) {
+ dev_err(&pdev->dev, "Failed to setup active clocks.\n");
+ return count;
+ }
+ qproc->active_clk_count = count;
ret = q6v5_init_reset(qproc);
if (ret)
goto free_rproc;
+ count = q6v5_regulator_init(&pdev->dev, qproc->proxy_regs,
+ desc->proxy_reg_string, (int (*)[2])desc->proxy_uV_uA);
+ if (count < 0) {
+ dev_err(&pdev->dev, "Failed to setup active regulators.\n");
+ return count;
+ }
+ qproc->proxy_reg_count = count;
+
+ count = q6v5_regulator_init(&pdev->dev, qproc->active_regs,
+ desc->active_reg_string, (int (*)[2])desc->active_uV_uA);
+ if (count < 0) {
+ dev_err(&pdev->dev, "Failed to setup proxy regulators.\n");
+ return count;
+ }
+ qproc->active_reg_count = count;
+
ret = q6v5_request_irq(qproc, pdev, "wdog", q6v5_wdog_interrupt);
if (ret < 0)
goto free_rproc;
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2016-11-24 10:01 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-24 10:00 [RESEND PATCH v4 0/7]remoteproc: qcom: Add support to hexagon v56 1.5.0 in qcom hexagon rproc driver Avaneesh Kumar Dwivedi
2016-11-24 10:00 ` [RESEND PATCH v4 1/7] remoteproc: qcom: Add and initialize private data for hexagon dsp Avaneesh Kumar Dwivedi
2016-12-08 21:37 ` Bjorn Andersson
2016-12-09 11:42 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-09 19:32 ` Bjorn Andersson
2016-11-24 10:00 ` Avaneesh Kumar Dwivedi [this message]
2016-12-09 2:36 ` [RESEND PATCH v4 2/7] remoteproc: qcom: Initialize proxy and active clock's and regulator's Bjorn Andersson
2016-12-09 15:53 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 3/7] remoteproc: qcom: Modify regulator enable and disable interface Avaneesh Kumar Dwivedi
2016-12-09 2:44 ` Bjorn Andersson
2016-12-12 8:21 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 4/7] remoteproc: qcom: Modify clock enable and disable routine Avaneesh Kumar Dwivedi
2016-12-09 2:57 ` Bjorn Andersson
2016-12-12 8:23 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 5/7] remoteproc: qcom: Modify reset sequence for hexagon to support v56 1.5.0 Avaneesh Kumar Dwivedi
2016-12-09 4:35 ` Bjorn Andersson
2016-12-12 12:45 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-13 18:09 ` Bjorn Andersson
2016-12-13 19:45 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-13 22:07 ` Bjorn Andersson
2016-12-14 15:50 ` Dwivedi, Avaneesh Kumar (avani)
2016-12-14 20:13 ` Bjorn Andersson
2016-11-24 10:00 ` [RESEND PATCH v4 6/7] remoteproc: qcom: Modify stop routine to limit MX current for v56 1.5 Avaneesh Kumar Dwivedi
2016-12-09 4:42 ` Bjorn Andersson
2016-12-12 13:04 ` Dwivedi, Avaneesh Kumar (avani)
2016-11-24 10:00 ` [RESEND PATCH v4 7/7] clk: qcom: Add GCC_MSS_RESET support to reset MSS in v56 1.5.0 Avaneesh Kumar Dwivedi
2016-12-08 19:51 ` Bjorn Andersson
2016-12-12 13:05 ` Dwivedi, Avaneesh Kumar (avani)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479981638-32069-3-git-send-email-akdwived@codeaurora.org \
--to=akdwived@codeaurora.org \
--cc=agross@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).