From: Jordan Crouse <jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [PATCH 05/12] drm/msm: gpu: Add OUT_TYPE4 and OUT_TYPE7
Date: Mon, 28 Nov 2016 12:28:30 -0700 [thread overview]
Message-ID: <1480361317-9937-6-git-send-email-jcrouse@codeaurora.org> (raw)
In-Reply-To: <1480361317-9937-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Add helper functions for TYPE4 and TYPE7 ME opcodes that replace
TYPE0 and TYPE3 starting with the A5XX targets.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
drivers/gpu/drm/msm/adreno/adreno_gpu.h | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.h b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
index 50480bd..b93366b 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
@@ -224,6 +224,36 @@ OUT_PKT3(struct msm_ringbuffer *ring, uint8_t opcode, uint16_t cnt)
OUT_RING(ring, CP_TYPE3_PKT | ((cnt-1) << 16) | ((opcode & 0xFF) << 8));
}
+static inline u32 PM4_PARITY(u32 val)
+{
+ return (0x9669 >> (0xF & (val ^
+ (val >> 4) ^ (val >> 8) ^ (val >> 12) ^
+ (val >> 16) ^ ((val) >> 20) ^ (val >> 24) ^
+ (val >> 28)))) & 1;
+}
+
+/* Maximum number of values that can be executed for one opcode */
+#define TYPE4_MAX_PAYLOAD 127
+
+#define PKT4(_reg, _cnt) \
+ (CP_TYPE4_PKT | ((_cnt) << 0) | (PM4_PARITY((_cnt)) << 7) | \
+ (((_reg) & 0x3FFFF) << 8) | (PM4_PARITY((_reg)) << 27))
+
+static inline void
+OUT_PKT4(struct msm_ringbuffer *ring, uint16_t regindx, uint16_t cnt)
+{
+ adreno_wait_ring(ring->gpu, cnt + 1);
+ OUT_RING(ring, PKT4(regindx, cnt));
+}
+
+static inline void
+OUT_PKT7(struct msm_ringbuffer *ring, uint8_t opcode, uint16_t cnt)
+{
+ adreno_wait_ring(ring->gpu, cnt + 1);
+ OUT_RING(ring, CP_TYPE7_PKT | (cnt << 0) | (PM4_PARITY(cnt) << 15) |
+ ((opcode & 0x7F) << 16) | (PM4_PARITY(opcode) << 23));
+}
+
/*
* adreno_reg_check() - Checks the validity of a register enum
* @gpu: Pointer to struct adreno_gpu
--
1.9.1
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
next prev parent reply other threads:[~2016-11-28 19:28 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-28 19:28 [PATCH 00/12] Adreno A5XX support Jordan Crouse
2016-11-28 19:28 ` [PATCH 01/12] drm/msm: gpu: Cut down the list of "generic" registers to the ones we use Jordan Crouse
[not found] ` <1480361317-9937-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-28 19:28 ` [PATCH 02/12] drm/msm: gpu: Return error on hw_init failure Jordan Crouse
2016-11-28 19:28 ` Jordan Crouse [this message]
2016-11-28 19:28 ` [PATCH 06/12] drm/msm: Remove 'src_clk' from adreno configuration Jordan Crouse
2016-11-28 19:28 ` [PATCH 03/12] drm/msm: gpu Add new gpu register read/write functions Jordan Crouse
2016-11-28 19:28 ` [PATCH 04/12] drm/msm: Add adreno_gpu_write64() Jordan Crouse
2016-11-28 19:28 ` [PATCH 07/12] drm/msm: Disable interrupts during init Jordan Crouse
2016-11-28 19:28 ` [PATCH 08/12] drm/msm: gpu: Add A5XX target support Jordan Crouse
2016-11-28 19:28 ` [PATCH 09/12] drm/msm: gpu: Add support for the GPMU Jordan Crouse
2016-11-28 19:28 ` [PATCH 10/12] firmware: qcom_scm: Add qcom_scm_gpu_zap_resume() Jordan Crouse
2017-01-13 17:12 ` Andy Gross
[not found] ` <20170113171241.GH5710-3KkwrOJo9xYlRp7syxWybdHuzzzSOjJt@public.gmane.org>
2017-01-13 17:22 ` Jordan Crouse
[not found] ` <20170113172244.GA28592-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-13 17:45 ` Andy Gross
2017-01-13 23:24 ` [Freedreno] " Jordan Crouse
[not found] ` <20170113232438.GA24139-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-15 3:49 ` Andy Gross
2017-01-15 5:20 ` [Freedreno] " Andy Gross
2017-01-16 15:13 ` Stanimir Varbanov
2017-01-17 17:04 ` Jordan Crouse
[not found] ` <20170117170459.GA29647-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-17 19:31 ` Andy Gross
[not found] ` <1480361317-9937-11-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-17 5:56 ` [PATCH] firmware: qcom_scm: Add set remote state API Andy Gross
[not found] ` <1484632578-4539-1-git-send-email-andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-01-18 16:51 ` Jordan Crouse
2017-01-18 17:37 ` Stanimir Varbanov
2017-01-24 9:54 ` Stanimir Varbanov
2017-01-24 16:11 ` Andy Gross
2016-11-28 19:28 ` [PATCH 11/12] drm/msm: Add a quick and dirty PIL loader Jordan Crouse
2016-12-05 19:57 ` Bjorn Andersson
2016-12-06 17:49 ` Jordan Crouse
2016-11-28 19:28 ` [PATCH 12/12] drm/msm: gpu: Use the zap shader on 5XX if we can Jordan Crouse
2016-12-05 19:57 ` Bjorn Andersson
2016-12-05 20:10 ` Bjorn Andersson
2016-12-06 15:35 ` Jordan Crouse
2016-12-06 16:37 ` [Freedreno] " Rob Clark
[not found] ` <20161206153501.GA25541-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2016-12-06 17:18 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480361317-9937-6-git-send-email-jcrouse@codeaurora.org \
--to=jcrouse-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).