From: Jordan Crouse <jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [PATCH 06/12] drm/msm: Remove 'src_clk' from adreno configuration
Date: Mon, 28 Nov 2016 12:28:31 -0700 [thread overview]
Message-ID: <1480361317-9937-7-git-send-email-jcrouse@codeaurora.org> (raw)
In-Reply-To: <1480361317-9937-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
The adreno code inherited a silly workaround from downstream
from the bad old days before decent clock control. grp_clk[0]
(named 'src_clk') doesn't actually exist - it was used as a proxy
for whatever the core clock actually was (usually 'core_clk').
All targets should be able to correctly request 'core_clk' and
get the right thing back so zap the anachronism and directly
use grp_clk[0] to control the clock rate.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
drivers/gpu/drm/msm/msm_gpu.c | 36 +++++++++++++-----------------------
drivers/gpu/drm/msm/msm_gpu.h | 2 +-
2 files changed, 14 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c
index f493931..e981224 100644
--- a/drivers/gpu/drm/msm/msm_gpu.c
+++ b/drivers/gpu/drm/msm/msm_gpu.c
@@ -91,21 +91,16 @@ static int disable_pwrrail(struct msm_gpu *gpu)
static int enable_clk(struct msm_gpu *gpu)
{
- struct clk *rate_clk = NULL;
int i;
- /* NOTE: kgsl_pwrctrl_clk() ignores grp_clks[0].. */
- for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i > 0; i--) {
- if (gpu->grp_clks[i]) {
- clk_prepare(gpu->grp_clks[i]);
- rate_clk = gpu->grp_clks[i];
- }
- }
+ if (gpu->grp_clks[0] && gpu->fast_rate)
+ clk_set_rate(gpu->grp_clks[0], gpu->fast_rate);
- if (rate_clk && gpu->fast_rate)
- clk_set_rate(rate_clk, gpu->fast_rate);
+ for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i >= 0; i--)
+ if (gpu->grp_clks[i])
+ clk_prepare(gpu->grp_clks[i]);
- for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i > 0; i--)
+ for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i >= 0; i--)
if (gpu->grp_clks[i])
clk_enable(gpu->grp_clks[i]);
@@ -114,24 +109,19 @@ static int enable_clk(struct msm_gpu *gpu)
static int disable_clk(struct msm_gpu *gpu)
{
- struct clk *rate_clk = NULL;
int i;
- /* NOTE: kgsl_pwrctrl_clk() ignores grp_clks[0].. */
- for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i > 0; i--) {
- if (gpu->grp_clks[i]) {
+ for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i >= 0; i--)
+ if (gpu->grp_clks[i])
clk_disable(gpu->grp_clks[i]);
- rate_clk = gpu->grp_clks[i];
- }
- }
- if (rate_clk && gpu->slow_rate)
- clk_set_rate(rate_clk, gpu->slow_rate);
-
- for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i > 0; i--)
+ for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i >= 0; i--)
if (gpu->grp_clks[i])
clk_unprepare(gpu->grp_clks[i]);
+ if (gpu->grp_clks[0] && gpu->slow_rate)
+ clk_set_rate(gpu->grp_clks[0], gpu->slow_rate);
+
return 0;
}
@@ -572,7 +562,7 @@ static irqreturn_t irq_handler(int irq, void *data)
}
static const char *clk_names[] = {
- "src_clk", "core_clk", "iface_clk", "mem_clk", "mem_iface_clk",
+ "core_clk", "iface_clk", "mem_clk", "mem_iface_clk",
"alt_mem_iface_clk",
};
diff --git a/drivers/gpu/drm/msm/msm_gpu.h b/drivers/gpu/drm/msm/msm_gpu.h
index baca428..bfe13d3 100644
--- a/drivers/gpu/drm/msm/msm_gpu.h
+++ b/drivers/gpu/drm/msm/msm_gpu.h
@@ -103,7 +103,7 @@ struct msm_gpu {
/* Power Control: */
struct regulator *gpu_reg, *gpu_cx;
- struct clk *ebi1_clk, *grp_clks[6];
+ struct clk *ebi1_clk, *grp_clks[5];
uint32_t fast_rate, slow_rate, bus_freq;
#ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
--
1.9.1
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
next prev parent reply other threads:[~2016-11-28 19:28 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-28 19:28 [PATCH 00/12] Adreno A5XX support Jordan Crouse
2016-11-28 19:28 ` [PATCH 01/12] drm/msm: gpu: Cut down the list of "generic" registers to the ones we use Jordan Crouse
2016-11-28 19:28 ` [PATCH 03/12] drm/msm: gpu Add new gpu register read/write functions Jordan Crouse
2016-11-28 19:28 ` [PATCH 04/12] drm/msm: Add adreno_gpu_write64() Jordan Crouse
[not found] ` <1480361317-9937-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-28 19:28 ` [PATCH 02/12] drm/msm: gpu: Return error on hw_init failure Jordan Crouse
2016-11-28 19:28 ` [PATCH 05/12] drm/msm: gpu: Add OUT_TYPE4 and OUT_TYPE7 Jordan Crouse
2016-11-28 19:28 ` Jordan Crouse [this message]
2016-11-28 19:28 ` [PATCH 07/12] drm/msm: Disable interrupts during init Jordan Crouse
2016-11-28 19:28 ` [PATCH 08/12] drm/msm: gpu: Add A5XX target support Jordan Crouse
2016-11-28 19:28 ` [PATCH 09/12] drm/msm: gpu: Add support for the GPMU Jordan Crouse
2016-11-28 19:28 ` [PATCH 10/12] firmware: qcom_scm: Add qcom_scm_gpu_zap_resume() Jordan Crouse
2017-01-13 17:12 ` Andy Gross
[not found] ` <20170113171241.GH5710-3KkwrOJo9xYlRp7syxWybdHuzzzSOjJt@public.gmane.org>
2017-01-13 17:22 ` Jordan Crouse
[not found] ` <20170113172244.GA28592-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-13 17:45 ` Andy Gross
2017-01-13 23:24 ` [Freedreno] " Jordan Crouse
[not found] ` <20170113232438.GA24139-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-15 3:49 ` Andy Gross
2017-01-15 5:20 ` [Freedreno] " Andy Gross
2017-01-16 15:13 ` Stanimir Varbanov
2017-01-17 17:04 ` Jordan Crouse
[not found] ` <20170117170459.GA29647-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-17 19:31 ` Andy Gross
[not found] ` <1480361317-9937-11-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-17 5:56 ` [PATCH] firmware: qcom_scm: Add set remote state API Andy Gross
[not found] ` <1484632578-4539-1-git-send-email-andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-01-18 16:51 ` Jordan Crouse
2017-01-18 17:37 ` Stanimir Varbanov
2017-01-24 9:54 ` Stanimir Varbanov
2017-01-24 16:11 ` Andy Gross
2016-11-28 19:28 ` [PATCH 11/12] drm/msm: Add a quick and dirty PIL loader Jordan Crouse
2016-12-05 19:57 ` Bjorn Andersson
2016-12-06 17:49 ` Jordan Crouse
2016-11-28 19:28 ` [PATCH 12/12] drm/msm: gpu: Use the zap shader on 5XX if we can Jordan Crouse
2016-12-05 19:57 ` Bjorn Andersson
2016-12-05 20:10 ` Bjorn Andersson
2016-12-06 15:35 ` Jordan Crouse
2016-12-06 16:37 ` [Freedreno] " Rob Clark
[not found] ` <20161206153501.GA25541-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2016-12-06 17:18 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480361317-9937-7-git-send-email-jcrouse@codeaurora.org \
--to=jcrouse-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).