linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jordan Crouse <jcrouse@codeaurora.org>
To: freedreno@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH 07/12] drm/msm: Disable interrupts during init
Date: Mon, 28 Nov 2016 12:28:32 -0700	[thread overview]
Message-ID: <1480361317-9937-8-git-send-email-jcrouse@codeaurora.org> (raw)
In-Reply-To: <1480361317-9937-1-git-send-email-jcrouse@codeaurora.org>

Disable the interrupt during the init sequence to avoid having
interrupts fired for errors and other things that we are not
ready to handle while initializing.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
 drivers/gpu/drm/msm/adreno/adreno_device.c | 4 ++++
 drivers/gpu/drm/msm/adreno/adreno_gpu.c    | 3 +++
 2 files changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c
index 5127b75..3321d33 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_device.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_device.c
@@ -148,12 +148,16 @@ struct msm_gpu *adreno_load_gpu(struct drm_device *dev)
 		mutex_lock(&dev->struct_mutex);
 		gpu->funcs->pm_resume(gpu);
 		mutex_unlock(&dev->struct_mutex);
+
+		disable_irq(gpu->irq);
+
 		ret = gpu->funcs->hw_init(gpu);
 		if (ret) {
 			dev_err(dev->dev, "gpu hw init failed: %d\n", ret);
 			gpu->funcs->destroy(gpu);
 			gpu = NULL;
 		} else {
+			enable_irq(gpu->irq);
 			/* give inactive pm a chance to kick in: */
 			msm_gpu_retire(gpu);
 		}
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 3f8c730..644be52 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -129,11 +129,14 @@ void adreno_recover(struct msm_gpu *gpu)
 	adreno_gpu->memptrs->wptr  = 0;
 
 	gpu->funcs->pm_resume(gpu);
+
+	disable_irq(gpu->irq);
 	ret = gpu->funcs->hw_init(gpu);
 	if (ret) {
 		dev_err(dev->dev, "gpu hw init failed: %d\n", ret);
 		/* hmm, oh well? */
 	}
+	enable_irq(gpu->irq);
 }
 
 void adreno_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit,
-- 
1.9.1

  parent reply	other threads:[~2016-11-28 19:28 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-28 19:28 [PATCH 00/12] Adreno A5XX support Jordan Crouse
2016-11-28 19:28 ` [PATCH 01/12] drm/msm: gpu: Cut down the list of "generic" registers to the ones we use Jordan Crouse
2016-11-28 19:28 ` [PATCH 03/12] drm/msm: gpu Add new gpu register read/write functions Jordan Crouse
2016-11-28 19:28 ` [PATCH 04/12] drm/msm: Add adreno_gpu_write64() Jordan Crouse
     [not found] ` <1480361317-9937-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-28 19:28   ` [PATCH 02/12] drm/msm: gpu: Return error on hw_init failure Jordan Crouse
2016-11-28 19:28   ` [PATCH 05/12] drm/msm: gpu: Add OUT_TYPE4 and OUT_TYPE7 Jordan Crouse
2016-11-28 19:28   ` [PATCH 06/12] drm/msm: Remove 'src_clk' from adreno configuration Jordan Crouse
2016-11-28 19:28 ` Jordan Crouse [this message]
2016-11-28 19:28 ` [PATCH 08/12] drm/msm: gpu: Add A5XX target support Jordan Crouse
2016-11-28 19:28 ` [PATCH 09/12] drm/msm: gpu: Add support for the GPMU Jordan Crouse
2016-11-28 19:28 ` [PATCH 10/12] firmware: qcom_scm: Add qcom_scm_gpu_zap_resume() Jordan Crouse
2017-01-13 17:12   ` Andy Gross
     [not found]     ` <20170113171241.GH5710-3KkwrOJo9xYlRp7syxWybdHuzzzSOjJt@public.gmane.org>
2017-01-13 17:22       ` Jordan Crouse
     [not found]         ` <20170113172244.GA28592-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-13 17:45           ` Andy Gross
2017-01-13 23:24     ` [Freedreno] " Jordan Crouse
     [not found]       ` <20170113232438.GA24139-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-15  3:49         ` Andy Gross
2017-01-15  5:20           ` [Freedreno] " Andy Gross
2017-01-16 15:13             ` Stanimir Varbanov
2017-01-17 17:04             ` Jordan Crouse
     [not found]               ` <20170117170459.GA29647-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2017-01-17 19:31                 ` Andy Gross
     [not found]   ` <1480361317-9937-11-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-17  5:56     ` [PATCH] firmware: qcom_scm: Add set remote state API Andy Gross
     [not found]       ` <1484632578-4539-1-git-send-email-andy.gross-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2017-01-18 16:51         ` Jordan Crouse
2017-01-18 17:37       ` Stanimir Varbanov
2017-01-24  9:54       ` Stanimir Varbanov
2017-01-24 16:11         ` Andy Gross
2016-11-28 19:28 ` [PATCH 11/12] drm/msm: Add a quick and dirty PIL loader Jordan Crouse
2016-12-05 19:57   ` Bjorn Andersson
2016-12-06 17:49     ` Jordan Crouse
2016-11-28 19:28 ` [PATCH 12/12] drm/msm: gpu: Use the zap shader on 5XX if we can Jordan Crouse
2016-12-05 19:57   ` Bjorn Andersson
2016-12-05 20:10     ` Bjorn Andersson
2016-12-06 15:35     ` Jordan Crouse
2016-12-06 16:37       ` [Freedreno] " Rob Clark
     [not found]       ` <20161206153501.GA25541-9PYrDHPZ2Orvke4nUoYGnHL1okKdlPRT@public.gmane.org>
2016-12-06 17:18         ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1480361317-9937-8-git-send-email-jcrouse@codeaurora.org \
    --to=jcrouse@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).