linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jordan Crouse <jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] arm64: dts: Add Adreno GPU and GPU smmu definitions
Date: Fri,  2 Dec 2016 08:30:49 -0700	[thread overview]
Message-ID: <1480692649-29384-1-git-send-email-jcrouse@codeaurora.org> (raw)

Add an initial node for the Adreno GPU and it's companion
SMMU. The GPU node is mostly complete except for a bare
bones power table that will be filled out more completely
later.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 78 +++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index a3a4dee..4108f21 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -473,6 +473,84 @@
 			};
 		};
 
+		adreno_smmu: arm,smmu@b40000 {
+			compatible = "arm,smmu-v2";
+			reg = <0xb40000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <0 334 0>,
+				     <0 329 0>,
+				     <0 330 0>;
+			#iommu-cells = <1>;
+
+			clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
+				<&mmcc MMSS_MMAGIC_CFG_AHB_CLK>,
+				<&mmcc GPU_AHB_CLK>,
+				<&gcc GCC_MMSS_BIMC_GFX_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&mmcc MMSS_MISC_AHB_CLK>;
+			clock-names = "mmagic_ahb_clk",
+				"mmagic_cfg_ahb_clk",
+				"gpu_ahb_clk",
+				"gcc_mmss_bimc_gfx_clk",
+				"gcc_bimc_gfx_clk",
+				"mmss_misc_bus_clk";
+
+			power-domains = <&mmcc GPU_GDSC>;
+
+			qcom,skip-init;
+			qcom,register-save;
+
+			status = "okay";
+		};
+
+		adreno-3xx@b00000 {
+			compatible = "qcom,adreno-3xx";
+			#stream-id-cells = <16>;
+
+			reg = <0xb00000 0x3f000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <0 300 0>;
+			interrupt-names = "kgsl_3d0_irq";
+
+			clocks = <&mmcc GPU_GX_GFX3D_CLK>,
+				<&mmcc GPU_AHB_CLK>,
+				<&mmcc GPU_GX_RBBMTIMER_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_MMSS_BIMC_GFX_CLK>,
+				<&mmcc MMSS_MMAGIC_AHB_CLK>;
+
+			clock-names = "core_clk",
+				"iface_clk",
+				"rbbmtimer_clk",
+				"mem_clk",
+				"mem_iface_clk",
+				"alt_mem_iface_clk";
+
+			power-domains = <&mmcc GPU_GDSC>;
+			iommus = <&adreno_smmu 0>;
+
+			/* There are patchlevel 3 chips in the world (Snapdragon
+			 * (820) but they are functionally similar to the 821 in
+			 * the code so we can safely set the chipset as
+			 * patchlevel 4. */
+			qcom,chipid = <0x05030004>;
+
+			/* This is a safe speed for bring up in all bin levels.
+			 * This isn't the fastest the chip can go, but we can
+			 * get there eventually */
+			qcom,gpu-pwrlevels {
+				compatible = "qcom,gpu-pwrlevels";
+				qcom,gpu-pwrlevel@0 {
+					qcom,gpu-freq = <205000000>;
+				};
+				qcom,gpu-pwrlevel@1 {
+					qcom,gpu-freq = <27000000>;
+				};
+			};
+		};
+
 		mdp_smmu: arm,smmu@d00000 {
 			compatible = "arm,smmu-v2";
 			reg = <0xd00000 0x10000>;
-- 
1.9.1

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

             reply	other threads:[~2016-12-02 15:30 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-02 15:30 Jordan Crouse [this message]
2016-12-02 18:30 ` [PATCH] arm64: dts: Add Adreno GPU and GPU smmu definitions Stephen Boyd
  -- strict thread matches above, loose matches on Subject: below --
2019-01-29 13:23 [PATCH 4/6] " Srinivas Kandagatla
2019-01-29 23:58 ` [PATCH] " Jordan Crouse
2019-01-30  5:32   ` Vivek Gautam
2019-01-30 10:54     ` Srinivas Kandagatla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1480692649-29384-1-git-send-email-jcrouse@codeaurora.org \
    --to=jcrouse-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).