linux-arm-msm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Archit Taneja <architt@codeaurora.org>
To: laurent.pinchart@ideasonboard.com
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v5 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings
Date: Wed, 11 Jan 2017 12:22:26 +0530	[thread overview]
Message-ID: <1484117547-26417-2-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1484117547-26417-1-git-send-email-architt@codeaurora.org>

Add the regulator supply properties needed by ADV7511 and ADV7533.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
v5:
- Bring back supplies for individual pins
- In v2, we had a v3p3-supply for DVDD_3V on ADV7511 and V3P3 pin
  on ADV7533. We don't really need to force a common name here
  (the adv7511 driver manages 2 different regulator name tables
  anyway).
  The supply on ADV7511 is called dvdd-3v-supply to match the
  pin name.

 .../devicetree/bindings/display/bridge/adi,adv7511.txt       | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 6532a59..00ea670 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -38,10 +38,22 @@ The following input format properties are required except in "rgb 1x" and
 - adi,input-justification: The input bit justification ("left", "evenly",
   "right").
 
+- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip.
+- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip.
+- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip.
+- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V
+  on the chip.
+- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is
+  needed only for ADV7511.
+
 The following properties are required for ADV7533:
 
 - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
   be one of 1, 2, 3 or 4.
+- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip.
+- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip.
+- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be
+  either 1.2V or 1.8V.
 
 Optional properties:
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2017-01-11  6:52 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-31 10:52 [PATCH 0/3] arm64: apq8016-sbc: Enable regulators for ADV7533 Archit Taneja
     [not found] ` <1472640730-24326-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-08-31 10:52   ` [PATCH 1/3] dt-bindings: drm/bridge: adv7511: Add " Archit Taneja
2016-09-02 15:56     ` Rob Herring
2016-09-06  4:22       ` Archit Taneja
2016-08-31 10:52 ` [PATCH 2/3] drm/bridge: adv7533: Initialize regulators Archit Taneja
2016-08-31 15:53   ` Laurent Pinchart
2016-08-31 16:54     ` Archit Taneja
2016-08-31 20:30       ` Laurent Pinchart
2016-09-01 10:09         ` Archit Taneja
2016-08-31 10:52 ` [PATCH 3/3] arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges Archit Taneja
2016-08-31 20:54   ` Stephen Boyd
2016-09-01  6:12     ` Archit Taneja
2016-09-02  3:47     ` Bjorn Andersson
2016-09-23  9:20 ` [PATCH v2 0/4] arm64: apq8016-sbc: Enable regulators for ADV7533 Archit Taneja
2016-09-23  9:20   ` [PATCH v2 1/4] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2016-09-23 22:31     ` Rob Herring
     [not found]     ` <1474622430-6704-2-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-09-25 17:28       ` Laurent Pinchart
2016-09-26  6:40         ` Archit Taneja
2016-09-26  8:12           ` Laurent Pinchart
2016-10-14  5:40             ` Archit Taneja
2016-11-10  1:34               ` Rob Herring
     [not found]                 ` <CAL_Jsq+KMPoyWvh1U3OKL6pX8D4QByqVFgcMks8myDfZEYeFCg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-11-15  3:35                   ` Archit Taneja
2016-09-23  9:20   ` [PATCH v2 2/4] drm/bridge: adv7511: Initialize regulators Archit Taneja
2016-09-25 17:35     ` Laurent Pinchart
2016-09-26  6:40       ` Archit Taneja
2016-09-23  9:20   ` [PATCH v2 3/4] arm64: dts: apq8016-sbc: Add some missing regulator supplies for ADV7533 Archit Taneja
2016-09-23  9:20   ` [PATCH v2 4/4] arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges Archit Taneja
2016-11-29  6:07   ` [PATCH v3 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
     [not found]     ` <1480399662-8858-1-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-29  6:07       ` [PATCH v3 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
     [not found]         ` <1480399662-8858-2-git-send-email-architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-11-29  6:33           ` Laurent Pinchart
2016-11-29  8:11             ` Archit Taneja
2016-11-29  9:11               ` Laurent Pinchart
2016-11-29 11:01                 ` Mark Brown
2016-11-29 19:37                   ` Laurent Pinchart
2016-11-30 16:14                     ` Mark Brown
2016-12-05 21:11                 ` Bjorn Andersson
2016-12-05 21:16                   ` Laurent Pinchart
2016-12-06 10:05                     ` Mark Brown
2016-12-06 12:46                       ` Laurent Pinchart
2016-12-06 13:20                         ` Mark Brown
2016-12-06 16:08                           ` Laurent Pinchart
2016-12-06 16:11                             ` Mark Brown
2016-11-29  6:07     ` [PATCH v3 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
2016-11-29  6:28       ` Laurent Pinchart
2016-12-05  7:53     ` [PATCH v4 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
2016-12-05  7:53       ` [PATCH v4 1/2] dt-bindings: drm/bridge: adv7511: Add regulator bindings Archit Taneja
2016-12-09 22:11         ` Rob Herring
2016-12-18 11:17           ` Archit Taneja
2016-12-05  7:53       ` [PATCH v4 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja
2017-01-11  6:52       ` [PATCH v5 0/2] drm/bridge: adv7511: Enable regulators Archit Taneja
2017-01-11  6:52         ` Archit Taneja [this message]
2017-01-11  6:52         ` [PATCH v5 2/2] drm/bridge: adv7511: Initialize regulators Archit Taneja

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484117547-26417-2-git-send-email-architt@codeaurora.org \
    --to=architt@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-msm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).