From: Vivek Gautam <vivek.gautam@codeaurora.org>
To: p.zabel@pengutronix.de, linux-kernel@vger.kernel.org
Cc: linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org,
jonathanh@nvidia.com, balbi@kernel.org,
gregkh@linuxfoundation.org, linux-arm-msm@vger.kernel.org,
Vivek Gautam <vivek.gautam@codeaurora.org>,
Thierry Reding <treding@nvidia.com>
Subject: [PATCH v4 4/4] soc/tegra: pmc: Use the new reset APIs to manage reset controllers
Date: Mon, 22 May 2017 16:53:27 +0530 [thread overview]
Message-ID: <1495452207-6129-5-git-send-email-vivek.gautam@codeaurora.org> (raw)
In-Reply-To: <1495452207-6129-1-git-send-email-vivek.gautam@codeaurora.org>
Make use of reset_control_array_*() set of APIs to manage
an array of reset controllers available with the device.
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
drivers/soc/tegra/pmc.c | 91 +++++++++++++++++--------------------------------
1 file changed, 31 insertions(+), 60 deletions(-)
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index e233dd5dcab3..668f5d3d3635 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -124,8 +124,8 @@ struct tegra_powergate {
unsigned int id;
struct clk **clks;
unsigned int num_clks;
- struct reset_control **resets;
- unsigned int num_resets;
+ struct reset_control *reset;
+ struct reset_control_array *resets;
};
struct tegra_io_pad_soc {
@@ -348,32 +348,20 @@ static int tegra_powergate_enable_clocks(struct tegra_powergate *pg)
return err;
}
-static int tegra_powergate_reset_assert(struct tegra_powergate *pg)
+static inline int tegra_powergate_reset_assert(struct tegra_powergate *pg)
{
- unsigned int i;
- int err;
+ if (!IS_ERR_OR_NULL(pg->reset))
+ return reset_control_assert(pg->reset);
- for (i = 0; i < pg->num_resets; i++) {
- err = reset_control_assert(pg->resets[i]);
- if (err)
- return err;
- }
-
- return 0;
+ return reset_control_array_assert(pg->resets);
}
-static int tegra_powergate_reset_deassert(struct tegra_powergate *pg)
+static inline int tegra_powergate_reset_deassert(struct tegra_powergate *pg)
{
- unsigned int i;
- int err;
+ if (!IS_ERR_OR_NULL(pg->reset))
+ return reset_control_deassert(pg->reset);
- for (i = 0; i < pg->num_resets; i++) {
- err = reset_control_deassert(pg->resets[i]);
- if (err)
- return err;
- }
-
- return 0;
+ return reset_control_array_deassert(pg->resets);
}
static int tegra_powergate_power_up(struct tegra_powergate *pg,
@@ -566,8 +554,13 @@ int tegra_powergate_sequence_power_up(unsigned int id, struct clk *clk,
pg.id = id;
pg.clks = &clk;
pg.num_clks = 1;
- pg.resets = &rst;
- pg.num_resets = 1;
+
+ /*
+ * Handle the reset control passed from the client separately.
+ * So, the pmc will either have this single reset control, or,
+ * have a list of reset controls managed by the driver on its own.
+ */
+ pg.reset = rst;
err = tegra_powergate_power_up(&pg, false);
if (err)
@@ -755,45 +748,26 @@ static int tegra_powergate_of_get_clks(struct tegra_powergate *pg,
static int tegra_powergate_of_get_resets(struct tegra_powergate *pg,
struct device_node *np, bool off)
{
- struct reset_control *rst;
- unsigned int i, count;
int err;
- count = of_count_phandle_with_args(np, "resets", "#reset-cells");
- if (count == 0)
- return -ENODEV;
-
- pg->resets = kcalloc(count, sizeof(rst), GFP_KERNEL);
- if (!pg->resets)
- return -ENOMEM;
-
- for (i = 0; i < count; i++) {
- pg->resets[i] = of_reset_control_get_by_index(np, i);
- if (IS_ERR(pg->resets[i])) {
- err = PTR_ERR(pg->resets[i]);
- goto error;
- }
-
- if (off)
- err = reset_control_assert(pg->resets[i]);
- else
- err = reset_control_deassert(pg->resets[i]);
-
- if (err) {
- reset_control_put(pg->resets[i]);
- goto error;
- }
+ pg->resets = of_reset_control_array_get_exclusive(np);
+ if (IS_ERR(pg->resets)) {
+ pr_err("failed to get device resets\n");
+ return PTR_ERR(pg->resets);
}
- pg->num_resets = count;
+ if (off)
+ err = reset_control_array_assert(pg->resets);
+ else
+ err = reset_control_array_deassert(pg->resets);
- return 0;
+ if (err)
+ goto put_reset;
-error:
- while (i--)
- reset_control_put(pg->resets[i]);
+ return 0;
- kfree(pg->resets);
+put_reset:
+ reset_control_array_put(pg->resets);
return err;
}
@@ -885,10 +859,7 @@ static void tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np)
pm_genpd_remove(&pg->genpd);
remove_resets:
- while (pg->num_resets--)
- reset_control_put(pg->resets[pg->num_resets]);
-
- kfree(pg->resets);
+ reset_control_array_put(pg->resets);
remove_clks:
while (pg->num_clks--)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2017-05-22 11:23 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-22 11:23 [PATCH v4 0/4] reset: APIs to manage a list of resets Vivek Gautam
[not found] ` <1495452207-6129-1-git-send-email-vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-05-22 11:23 ` [PATCH v4 1/4] usb: dwc3: of-simple: Re-order resource handling in remove Vivek Gautam
2017-05-22 11:23 ` [PATCH v4 2/4] reset: Add APIs to manage array of resets Vivek Gautam
2017-05-22 11:23 ` [PATCH v4 3/4] usb: dwc3: of-simple: Add support to get resets for the device Vivek Gautam
2017-05-22 11:23 ` Vivek Gautam [this message]
[not found] ` <1495452207-6129-5-git-send-email-vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-05-31 14:23 ` [PATCH v4 4/4] soc/tegra: pmc: Use the new reset APIs to manage reset controllers Jon Hunter
[not found] ` <53360973-098e-14fa-88e9-b0864822359a-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2017-06-01 6:35 ` Vivek Gautam
2017-06-01 16:44 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495452207-6129-5-git-send-email-vivek.gautam@codeaurora.org \
--to=vivek.gautam@codeaurora.org \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=treding@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).