From: Kiran Gunda <kgunda@codeaurora.org>
To: Kiran Gunda <kgunda@codeaurora.org>,
Abhijeet Dharmapurikar <adharmap@codeaurora.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Subbaraman Narayanamurthy <subbaram@codeaurora.org>,
David Collins <collinsd@codeaurora.org>,
Christophe JAILLET <christophe.jaillet@wanadoo.fr>,
linux-kernel@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org, adharmap@quicinc.com,
aghayal@qti.qualcomm.com, sboyd@codeaurora.org
Subject: [PATCH V1 13/15] spmi: pmic-arb: add support for HW version 5
Date: Tue, 30 May 2017 18:09:01 +0530 [thread overview]
Message-ID: <1496147943-25822-14-git-send-email-kgunda@codeaurora.org> (raw)
In-Reply-To: <1496147943-25822-1-git-send-email-kgunda@codeaurora.org>
From: David Collins <collinsd@codeaurora.org>
Add support for version 5 of the SPMI PMIC arbiter. It utilizes
different offsets for registers than those found on version 3.
Also, the procedure to determine if writing and IRQ access is
allowed for a given PPID changes for version 5.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
drivers/spmi/spmi-pmic-arb.c | 248 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 224 insertions(+), 24 deletions(-)
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 412481d..b755c24 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -29,6 +29,7 @@
#define PMIC_ARB_VERSION 0x0000
#define PMIC_ARB_VERSION_V2_MIN 0x20010000
#define PMIC_ARB_VERSION_V3_MIN 0x30000000
+#define PMIC_ARB_VERSION_V5_MIN 0x50000000
#define PMIC_ARB_INT_EN 0x0004
/* PMIC Arbiter channel registers offsets */
@@ -39,7 +40,6 @@
#define PMIC_ARB_WDATA1 0x14
#define PMIC_ARB_RDATA0 0x18
#define PMIC_ARB_RDATA1 0x1C
-#define PMIC_ARB_REG_CHNL(N) (0x800 + 0x4 * (N))
/* Mapping Table */
#define SPMI_MAPPING_TABLE_REG(N) (0x0B00 + (4 * (N)))
@@ -52,6 +52,8 @@
#define SPMI_MAPPING_TABLE_TREE_DEPTH 16 /* Maximum of 16-bits */
#define PMIC_ARB_MAX_PPID BIT(12) /* PPID is 12bit */
#define PMIC_ARB_CHAN_VALID BIT(15)
+#define PMIC_ARB_CHAN_IS_IRQ_OWNER(reg) ((reg) & BIT(24))
+#define INVALID_EE (-1)
/* Ownership Table */
#define SPMI_OWNERSHIP_TABLE_REG(N) (0x0700 + (4 * (N)))
@@ -86,6 +88,15 @@ enum pmic_arb_cmd_op_code {
PMIC_ARB_OP_ZERO_WRITE = 16,
};
+/*
+ * PMIC arbiter version 5 uses different register offsets for read/write vs
+ * observer channels.
+ */
+enum pmic_arb_channel {
+ PMIC_ARB_CHANNEL_RW,
+ PMIC_ARB_CHANNEL_OBS,
+};
+
/* Maximum number of support PMIC peripherals */
#define PMIC_ARB_MAX_PERIPHS 512
#define PMIC_ARB_TIMEOUT_US 100
@@ -112,7 +123,8 @@ enum pmic_arb_cmd_op_code {
struct apid_data {
u16 ppid;
- u8 owner;
+ u8 write_owner;
+ u8 irq_owner;
};
/**
@@ -121,6 +133,7 @@ struct apid_data {
* @rd_base: on v1 "core", on v2 "observer" register base off DT.
* @wr_base: on v1 "core", on v2 "chnls" register base off DT.
* @intr: address of the SPMI interrupt control registers.
+ * @acc_status: address of SPMI ACC interrupt status registers.
* @cnfg: address of the PMIC Arbiter configuration registers.
* @lock: lock to synchronize accesses.
* @channel: execution environment channel to use for accesses.
@@ -140,6 +153,7 @@ struct spmi_pmic_arb {
void __iomem *rd_base;
void __iomem *wr_base;
void __iomem *intr;
+ void __iomem *acc_status;
void __iomem *cnfg;
void __iomem *core;
resource_size_t core_size;
@@ -179,6 +193,7 @@ struct spmi_pmic_arb {
* on v2 offset of SPMI_PIC_IRQ_STATUSn.
* @irq_clear: on v1 offset of PMIC_ARB_SPMI_PIC_IRQ_CLEARn
* on v2 offset of SPMI_PIC_IRQ_CLEARn.
+ * @channel_map_offset: offset of PMIC_ARB_REG_CHNLn
*/
struct pmic_arb_ver_ops {
const char *ver_str;
@@ -188,7 +203,7 @@ struct pmic_arb_ver_ops {
mode_t *mode);
/* spmi commands (read_cmd, write_cmd, cmd) functionality */
int (*offset)(struct spmi_pmic_arb *dev, u8 sid, u16 addr,
- u32 *offset);
+ enum pmic_arb_channel ch_type, u32 *offset);
u32 (*fmt_cmd)(u8 opc, u8 sid, u16 addr, u8 bc);
int (*non_data_cmd)(struct spmi_controller *ctrl, u8 opc, u8 sid);
/* Interrupts controller functionality (offset of PIC registers) */
@@ -196,6 +211,7 @@ struct pmic_arb_ver_ops {
u32 (*acc_enable)(u16 n);
u32 (*irq_status)(u16 n);
u32 (*irq_clear)(u16 n);
+ u32 (*channel_map_offset)(u16 n);
};
static inline void pmic_arb_base_write(struct spmi_pmic_arb *pa,
@@ -239,7 +255,8 @@ static void pa_read_data(struct spmi_pmic_arb *pa, u8 *buf, u32 reg, u8 bc)
}
static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
- void __iomem *base, u8 sid, u16 addr)
+ void __iomem *base, u8 sid, u16 addr,
+ enum pmic_arb_channel ch_type)
{
struct spmi_pmic_arb *pa = spmi_controller_get_drvdata(ctrl);
u32 status = 0;
@@ -247,7 +264,7 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
u32 offset;
int rc;
- rc = pa->ver_ops->offset(pa, sid, addr, &offset);
+ rc = pa->ver_ops->offset(pa, sid, addr, ch_type, &offset);
if (rc)
return rc;
@@ -298,7 +315,7 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
int rc;
u32 offset;
- rc = pa->ver_ops->offset(pa, sid, 0, &offset);
+ rc = pa->ver_ops->offset(pa, sid, 0, PMIC_ARB_CHANNEL_RW, &offset);
if (rc)
return rc;
@@ -306,7 +323,8 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
raw_spin_lock_irqsave(&pa->lock, flags);
pmic_arb_base_write(pa, offset + PMIC_ARB_CMD, cmd);
- rc = pmic_arb_wait_for_done(ctrl, pa->wr_base, sid, 0);
+ rc = pmic_arb_wait_for_done(ctrl, pa->wr_base, sid, 0,
+ PMIC_ARB_CHANNEL_RW);
raw_spin_unlock_irqrestore(&pa->lock, flags);
return rc;
@@ -343,7 +361,7 @@ static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
u32 offset;
mode_t mode;
- rc = pa->ver_ops->offset(pa, sid, addr, &offset);
+ rc = pa->ver_ops->offset(pa, sid, addr, PMIC_ARB_CHANNEL_OBS, &offset);
if (rc)
return rc;
@@ -379,7 +397,8 @@ static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
raw_spin_lock_irqsave(&pa->lock, flags);
pmic_arb_set_rd_cmd(pa, offset + PMIC_ARB_CMD, cmd);
- rc = pmic_arb_wait_for_done(ctrl, pa->rd_base, sid, addr);
+ rc = pmic_arb_wait_for_done(ctrl, pa->rd_base, sid, addr,
+ PMIC_ARB_CHANNEL_OBS);
if (rc)
goto done;
@@ -405,7 +424,7 @@ static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
u32 offset;
mode_t mode;
- rc = pa->ver_ops->offset(pa, sid, addr, &offset);
+ rc = pa->ver_ops->offset(pa, sid, addr, PMIC_ARB_CHANNEL_RW, &offset);
if (rc)
return rc;
@@ -449,7 +468,8 @@ static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
/* Start the transaction */
pmic_arb_base_write(pa, offset + PMIC_ARB_CMD, cmd);
- rc = pmic_arb_wait_for_done(ctrl, pa->wr_base, sid, addr);
+ rc = pmic_arb_wait_for_done(ctrl, pa->wr_base, sid, addr,
+ PMIC_ARB_CHANNEL_RW);
raw_spin_unlock_irqrestore(&pa->lock, flags);
return rc;
@@ -547,7 +567,6 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
{
struct spmi_pmic_arb *pa = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
- void __iomem *intr = pa->intr;
int first = pa->min_apid >> 5;
int last = pa->max_apid >> 5;
u32 status, enable;
@@ -556,13 +575,13 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
chained_irq_enter(chip, desc);
for (i = first; i <= last; ++i) {
- status = readl_relaxed(intr +
+ status = readl_relaxed(pa->acc_status +
pa->ver_ops->owner_acc_status(pa->ee, i));
while (status) {
id = ffs(status) - 1;
status &= ~BIT(id);
apid = id + i * 32;
- enable = readl_relaxed(intr +
+ enable = readl_relaxed(pa->intr +
pa->ver_ops->acc_enable(apid));
if (enable & SPMI_PIC_ACC_ENABLE_BIT)
periph_interrupt(pa, apid);
@@ -705,11 +724,18 @@ static int qpnpint_irq_domain_dt_translate(struct irq_domain *d,
(intspec[1] << 8), &apid);
if (rc < 0) {
dev_err(&pa->spmic->dev,
- "failed to xlate sid = 0x%x, periph = 0x%x, irq = %x rc = %d\n",
+ "failed to xlate sid = 0x%x, periph = 0x%x, irq = %u rc = %d\n",
intspec[0], intspec[1], intspec[2], rc);
return rc;
}
+ if (pa->apid_data[apid].irq_owner != pa->ee) {
+ dev_err(&pa->spmic->dev, "failed to xlate sid = 0x%x, periph = 0x%x, irq = %u: ee=%u but owner=%u\n",
+ intspec[0], intspec[1], intspec[2], pa->ee,
+ pa->apid_data[apid].irq_owner);
+ return -ENODEV;
+ }
+
/* Keep track of {max,min}_apid for bounding search during interrupt */
if (apid > pa->max_apid)
pa->max_apid = apid;
@@ -795,7 +821,8 @@ static int qpnpint_irq_domain_map(struct irq_domain *d,
/* v1 offset per ee */
static int
-pmic_arb_offset_v1(struct spmi_pmic_arb *pa, u8 sid, u16 addr, u32 *offset)
+pmic_arb_offset_v1(struct spmi_pmic_arb *pa, u8 sid, u16 addr,
+ enum pmic_arb_channel ch_type, u32 *offset)
{
*offset = 0x800 + 0x80 * pa->channel;
return 0;
@@ -814,9 +841,11 @@ static u16 pmic_arb_find_apid(struct spmi_pmic_arb *pa, u16 ppid)
for (apid = pa->last_apid; apid < pa->max_periph; apid++) {
regval = readl_relaxed(pa->cnfg +
SPMI_OWNERSHIP_TABLE_REG(apid));
- pa->apid_data[apid].owner = SPMI_OWNERSHIP_PERIPH2OWNER(regval);
+ pa->apid_data[apid].irq_owner
+ = SPMI_OWNERSHIP_PERIPH2OWNER(regval);
+ pa->apid_data[apid].write_owner = pa->apid_data[apid].irq_owner;
- offset = PMIC_ARB_REG_CHNL(apid);
+ offset = pa->ver_ops->channel_map_offset(apid);
if (offset >= pa->core_size)
break;
@@ -854,27 +883,110 @@ static u16 pmic_arb_find_apid(struct spmi_pmic_arb *pa, u16 ppid)
return 0;
}
+static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pa)
+{
+ u32 regval, offset;
+ u16 apid, prev_apid, ppid;
+ bool valid, is_irq_owner;
+
+ /*
+ * PMIC_ARB_REG_CHNL is a table in HW mapping APID (channel) to PPID.
+ * ppid_to_apid is an in-memory invert of that table. In order to allow
+ * multiple EE's to write to a single PPID in arbiter version 5, there
+ * is more than one APID mapped to each PPID. The owner field for each
+ * of these mappings specifies the EE which is allowed to write to the
+ * APID. The owner of the last (highest) APID for a given PPID will
+ * receive interrupts from the PPID.
+ */
+ for (apid = 0; apid < pa->max_periph; apid++) {
+ offset = pa->ver_ops->channel_map_offset(apid);
+ if (offset >= pa->core_size)
+ break;
+
+ regval = readl_relaxed(pa->core + offset);
+ if (!regval)
+ continue;
+ ppid = (regval >> 8) & PMIC_ARB_PPID_MASK;
+ is_irq_owner = PMIC_ARB_CHAN_IS_IRQ_OWNER(regval);
+
+ regval = readl_relaxed(pa->cnfg +
+ SPMI_OWNERSHIP_TABLE_REG(apid));
+ pa->apid_data[apid].write_owner
+ = SPMI_OWNERSHIP_PERIPH2OWNER(regval);
+
+ pa->apid_data[apid].irq_owner = is_irq_owner ?
+ pa->apid_data[apid].write_owner : INVALID_EE;
+
+ valid = pa->ppid_to_apid[ppid] & PMIC_ARB_CHAN_VALID;
+ prev_apid = pa->ppid_to_apid[ppid] & ~PMIC_ARB_CHAN_VALID;
+
+ if (valid && is_irq_owner &&
+ pa->apid_data[prev_apid].write_owner == pa->ee) {
+ /*
+ * Duplicate PPID mapping after the one for this EE;
+ * override the irq owner
+ */
+ pa->apid_data[prev_apid].irq_owner
+ = pa->apid_data[apid].irq_owner;
+ } else if (!valid || is_irq_owner) {
+ /* First PPID mapping or duplicate for another EE */
+ pa->ppid_to_apid[ppid] = apid | PMIC_ARB_CHAN_VALID;
+ }
+
+ pa->apid_data[apid].ppid = ppid;
+ pa->last_apid = apid;
+ }
+
+ /* Dump the mapping table for debug purposes. */
+ dev_dbg(&pa->spmic->dev, "PPID APID Write-EE IRQ-EE\n");
+ for (ppid = 0; ppid < PMIC_ARB_MAX_PPID; ppid++) {
+ valid = pa->ppid_to_apid[ppid] & PMIC_ARB_CHAN_VALID;
+ apid = pa->ppid_to_apid[ppid] & ~PMIC_ARB_CHAN_VALID;
+
+ if (valid)
+ dev_dbg(&pa->spmic->dev, "0x%03X %3u %2u %2u\n",
+ ppid, apid, pa->apid_data[apid].write_owner,
+ pa->apid_data[apid].irq_owner);
+ }
+
+ return 0;
+}
+
+static int
+pmic_arb_ppid_to_apid_v5(struct spmi_pmic_arb *pa, u8 sid, u16 addr, u16 *apid)
+{
+ u16 ppid = (sid << 8) | (addr >> 8);
+
+ if (!(pa->ppid_to_apid[ppid] & PMIC_ARB_CHAN_VALID))
+ return -ENODEV;
+
+ *apid = pa->ppid_to_apid[ppid] & ~PMIC_ARB_CHAN_VALID;
+
+ return 0;
+}
+
static int
pmic_arb_mode_v2(struct spmi_pmic_arb *pa, u8 sid, u16 addr, mode_t *mode)
{
u16 apid;
int rc;
- rc = pmic_arb_ppid_to_apid_v2(pa, sid, addr, &apid);
+ rc = pa->ver_ops->ppid_to_apid(pa, sid, addr, &apid);
if (rc < 0)
return rc;
*mode = 0;
*mode |= S_IRUSR;
- if (pa->ee == pa->apid_data[apid].owner)
+ if (pa->ee == pa->apid_data[apid].write_owner)
*mode |= S_IWUSR;
return 0;
}
/* v2 offset per ppid and per ee */
static int
-pmic_arb_offset_v2(struct spmi_pmic_arb *pa, u8 sid, u16 addr, u32 *offset)
+pmic_arb_offset_v2(struct spmi_pmic_arb *pa, u8 sid, u16 addr,
+ enum pmic_arb_channel ch_type, u32 *offset)
{
u16 apid;
int rc;
@@ -887,6 +999,27 @@ static u16 pmic_arb_find_apid(struct spmi_pmic_arb *pa, u16 ppid)
return 0;
}
+/*
+ * v5 offset per ee and per apid for observer channels and per apid for
+ * read/write channels.
+ */
+static int
+pmic_arb_offset_v5(struct spmi_pmic_arb *pa, u8 sid, u16 addr,
+ enum pmic_arb_channel ch_type, u32 *offset)
+{
+ u16 apid;
+ int rc;
+
+ rc = pmic_arb_ppid_to_apid_v5(pa, sid, addr, &apid);
+ if (rc < 0)
+ return rc;
+
+ *offset = (ch_type == PMIC_ARB_CHANNEL_OBS)
+ ? 0x10000 * pa->ee + 0x80 * apid
+ : 0x10000 * apid;
+ return 0;
+}
+
static u32 pmic_arb_fmt_cmd_v1(u8 opc, u8 sid, u16 addr, u8 bc)
{
return (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7);
@@ -912,6 +1045,11 @@ static u32 pmic_arb_owner_acc_status_v3(u8 m, u16 n)
return 0x200000 + 0x1000 * m + 0x4 * n;
}
+static u32 pmic_arb_owner_acc_status_v5(u8 m, u16 n)
+{
+ return 0x10000 * m + 0x4 * n;
+}
+
static u32 pmic_arb_acc_enable_v1(u16 n)
{
return 0x200 + 0x4 * n;
@@ -922,6 +1060,11 @@ static u32 pmic_arb_acc_enable_v2(u16 n)
return 0x1000 * n;
}
+static u32 pmic_arb_acc_enable_v5(u16 n)
+{
+ return 0x100 + 0x10000 * n;
+}
+
static u32 pmic_arb_irq_status_v1(u16 n)
{
return 0x600 + 0x4 * n;
@@ -932,6 +1075,11 @@ static u32 pmic_arb_irq_status_v2(u16 n)
return 0x4 + 0x1000 * n;
}
+static u32 pmic_arb_irq_status_v5(u16 n)
+{
+ return 0x104 + 0x10000 * n;
+}
+
static u32 pmic_arb_irq_clear_v1(u16 n)
{
return 0xA00 + 0x4 * n;
@@ -942,6 +1090,21 @@ static u32 pmic_arb_irq_clear_v2(u16 n)
return 0x8 + 0x1000 * n;
}
+static u32 pmic_arb_irq_clear_v5(u16 n)
+{
+ return 0x108 + 0x10000 * n;
+}
+
+static u32 pmic_arb_channel_map_offset_v2(u16 n)
+{
+ return 0x800 + 0x4 * n;
+}
+
+static u32 pmic_arb_channel_map_offset_v5(u16 n)
+{
+ return 0x900 + 0x4 * n;
+}
+
static const struct pmic_arb_ver_ops pmic_arb_v1 = {
.ver_str = "v1",
.ppid_to_apid = pmic_arb_ppid_to_apid_v1,
@@ -953,6 +1116,7 @@ static u32 pmic_arb_irq_clear_v2(u16 n)
.acc_enable = pmic_arb_acc_enable_v1,
.irq_status = pmic_arb_irq_status_v1,
.irq_clear = pmic_arb_irq_clear_v1,
+ .channel_map_offset = pmic_arb_channel_map_offset_v2,
};
static const struct pmic_arb_ver_ops pmic_arb_v2 = {
@@ -966,6 +1130,7 @@ static u32 pmic_arb_irq_clear_v2(u16 n)
.acc_enable = pmic_arb_acc_enable_v2,
.irq_status = pmic_arb_irq_status_v2,
.irq_clear = pmic_arb_irq_clear_v2,
+ .channel_map_offset = pmic_arb_channel_map_offset_v2,
};
static const struct pmic_arb_ver_ops pmic_arb_v3 = {
@@ -979,6 +1144,21 @@ static u32 pmic_arb_irq_clear_v2(u16 n)
.acc_enable = pmic_arb_acc_enable_v2,
.irq_status = pmic_arb_irq_status_v2,
.irq_clear = pmic_arb_irq_clear_v2,
+ .channel_map_offset = pmic_arb_channel_map_offset_v2,
+};
+
+static const struct pmic_arb_ver_ops pmic_arb_v5 = {
+ .ver_str = "v5",
+ .ppid_to_apid = pmic_arb_ppid_to_apid_v5,
+ .mode = pmic_arb_mode_v2,
+ .non_data_cmd = pmic_arb_non_data_cmd_v2,
+ .offset = pmic_arb_offset_v5,
+ .fmt_cmd = pmic_arb_fmt_cmd_v2,
+ .owner_acc_status = pmic_arb_owner_acc_status_v5,
+ .acc_enable = pmic_arb_acc_enable_v5,
+ .irq_status = pmic_arb_irq_status_v5,
+ .irq_clear = pmic_arb_irq_clear_v5,
+ .channel_map_offset = pmic_arb_channel_map_offset_v5,
};
static const struct irq_domain_ops pmic_arb_irq_domain_ops = {
@@ -1033,11 +1213,14 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
if (hw_ver < PMIC_ARB_VERSION_V3_MIN)
pa->ver_ops = &pmic_arb_v2;
- else
+ else if (hw_ver < PMIC_ARB_VERSION_V5_MIN)
pa->ver_ops = &pmic_arb_v3;
+ else
+ pa->ver_ops = &pmic_arb_v5;
- /* the apid to ppid table starts at PMIC_ARB_REG_CHNL(0) */
- pa->max_periph = (pa->core_size - PMIC_ARB_REG_CHNL(0)) / 4;
+ /* the apid to ppid table starts at PMIC_ARB_REG_CHNL0 */
+ pa->max_periph
+ = (pa->core_size - pa->ver_ops->channel_map_offset(0)) / 4;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"obsrvr");
@@ -1074,6 +1257,14 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
err = PTR_ERR(pa->intr);
goto err_put_ctrl;
}
+ pa->acc_status = pa->intr;
+
+ /*
+ * PMIC arbiter v5 groups the IRQ control registers in the same hardware
+ * module as the read/write channels.
+ */
+ if (hw_ver >= PMIC_ARB_VERSION_V5_MIN)
+ pa->intr = pa->wr_base;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cnfg");
pa->cnfg = devm_ioremap_resource(&ctrl->dev, res);
@@ -1136,6 +1327,15 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
ctrl->read_cmd = pmic_arb_read_cmd;
ctrl->write_cmd = pmic_arb_write_cmd;
+ if (hw_ver >= PMIC_ARB_VERSION_V5_MIN) {
+ err = pmic_arb_read_apid_map_v5(pa);
+ if (err) {
+ dev_err(&pdev->dev, "could not read APID->PPID mapping table, rc= %d\n",
+ err);
+ goto err_put_ctrl;
+ }
+ }
+
dev_dbg(&pdev->dev, "adding irq domain\n");
pa->domain = irq_domain_add_tree(pdev->dev.of_node,
&pmic_arb_irq_domain_ops, pa);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
next prev parent reply other threads:[~2017-05-30 12:39 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-30 12:38 [PATCH V1 00/15]: support for spmi_pmic_arb v3/v5 and bug fixes Kiran Gunda
2017-05-30 12:38 ` [PATCH V1 01/15] spmi: pmic_arb: block access of invalid read and writes Kiran Gunda
2017-05-31 0:33 ` Stephen Boyd
2017-06-12 11:26 ` kgunda
2017-06-13 2:09 ` Stephen Boyd
2017-06-14 15:09 ` kgunda
2017-05-30 12:38 ` [PATCH V1 02/15] spmi: pmic-arb: rename spmi_pmic_arb_dev to spmi_pmic_arb Kiran Gunda
2017-05-31 0:46 ` Stephen Boyd
2017-06-01 16:11 ` kgunda
2017-06-02 18:29 ` Stephen Boyd
2017-06-05 6:28 ` kgunda
2017-05-30 12:38 ` [PATCH V1 03/15] spmi: pmic-arb: fix inconsistent use of apid and chan Kiran Gunda
2017-05-31 1:31 ` Stephen Boyd
2017-06-01 16:37 ` kgunda
2017-05-30 12:38 ` [PATCH V1 04/15] spmi: pmic-arb: optimize table lookups Kiran Gunda
2017-05-31 1:44 ` Stephen Boyd
2017-06-01 16:53 ` kgunda
2017-06-02 18:31 ` Stephen Boyd
2017-06-05 6:33 ` kgunda
2017-05-30 12:38 ` [PATCH V1 05/15] spmi: pmic-arb: cleanup unrequested irqs Kiran Gunda
2017-05-31 1:57 ` Stephen Boyd
2017-06-06 10:50 ` kgunda
2017-06-13 2:11 ` Stephen Boyd
2017-06-14 15:04 ` kgunda
2017-05-30 12:38 ` [PATCH V1 06/15] spmi: pmic-arb: fix missing interrupts Kiran Gunda
2017-05-31 2:00 ` Stephen Boyd
2017-06-01 17:06 ` kgunda
2017-05-30 12:38 ` [PATCH V1 07/15] spmi: pmic-arb: clear the latched status of the interrupt Kiran Gunda
2017-05-31 22:03 ` Stephen Boyd
2017-06-06 10:55 ` kgunda
2017-05-30 12:38 ` [PATCH V1 08/15] spmi: pmic_arb: use appropriate flow handler Kiran Gunda
2017-05-31 19:03 ` Stephen Boyd
2017-06-06 10:57 ` kgunda
2017-05-30 12:38 ` [PATCH V1 09/15] spmi: pmic-arb: check apid enabled before calling the handler Kiran Gunda
2017-05-31 20:39 ` Stephen Boyd
2017-06-14 15:38 ` kgunda
2017-06-16 21:11 ` Stephen Boyd
2017-06-21 5:02 ` kgunda
2017-05-30 12:38 ` [PATCH V1 10/15] spmi: pmic_arb: add support for PMIC bus arbiter v3 Kiran Gunda
2017-05-31 22:18 ` Stephen Boyd
2017-06-06 11:10 ` kgunda
2017-05-30 12:38 ` [PATCH V1 11/15] spmi: spmi-pmic-arb: enable the SPMI interrupt as a wakeup source Kiran Gunda
2017-05-31 17:13 ` Stephen Boyd
2017-06-08 11:30 ` kgunda
2017-05-30 12:39 ` [PATCH V1 12/15] spmi-pmic-arb: fix a possible null pointer dereference Kiran Gunda
2017-05-31 17:29 ` Stephen Boyd
2017-06-02 7:13 ` kgunda
2017-05-30 12:39 ` Kiran Gunda [this message]
2017-06-01 6:08 ` [PATCH V1 13/15] spmi: pmic-arb: add support for HW version 5 Stephen Boyd
2017-06-08 11:28 ` kgunda
2017-05-30 12:39 ` [PATCH V1 14/15] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq Kiran Gunda
2017-05-30 22:23 ` kbuild test robot
2017-05-31 17:53 ` Stephen Boyd
2017-06-02 7:26 ` kgunda
2017-06-06 11:27 ` kgunda
2017-06-13 2:10 ` Stephen Boyd
2017-07-18 11:53 ` kgunda
2017-05-30 12:39 ` [PATCH V1 15/15] spmi: pmic-arb: instantiate spmi_devices at arch_initcall Kiran Gunda
2017-05-31 22:07 ` Stephen Boyd
2017-07-18 11:49 ` kgunda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496147943-25822-14-git-send-email-kgunda@codeaurora.org \
--to=kgunda@codeaurora.org \
--cc=adharmap@codeaurora.org \
--cc=adharmap@quicinc.com \
--cc=aghayal@qti.qualcomm.com \
--cc=christophe.jaillet@wanadoo.fr \
--cc=collinsd@codeaurora.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sboyd@codeaurora.org \
--cc=subbaram@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).