Linux ARM-MSM sub-architecture
 help / color / mirror / Atom feed
From: Vivek Gautam <vivek.gautam@codeaurora.org>
To: kishon@ti.com, linux-kernel@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
	gregkh@linuxfoundation.org,
	Vivek Gautam <vivek.gautam@codeaurora.org>
Subject: [PATCH] phy: qcom-qmp: Fix failure path in phy_init functions
Date: Tue, 20 Jun 2017 11:27:18 +0530	[thread overview]
Message-ID: <1497938238-19101-1-git-send-email-vivek.gautam@codeaurora.org> (raw)

Fixing the clk enable failure path in qcom_qmp_phy_init()
and cleanup the reset control deassertion failure path in
qcom_qmp_phy_com_init().

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")

Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 78ca62897784..7b739571b301 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -654,8 +654,6 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 		if (ret) {
 			dev_err(qmp->dev, "%s reset deassert failed\n",
 				qmp->cfg->reset_list[i]);
-			while (--i >= 0)
-				reset_control_assert(qmp->resets[i]);
 			goto err_rst;
 		}
 	}
@@ -684,7 +682,7 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 		if (ret) {
 			dev_err(qmp->dev,
 				"phy common block init timed-out\n");
-			goto err_com_init;
+			goto err_rst;
 		}
 	}
 
@@ -692,11 +690,11 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp)
 
 	return 0;
 
-err_com_init:
+err_rst:
 	while (--i >= 0)
 		reset_control_assert(qmp->resets[i]);
-err_rst:
 	mutex_unlock(&qmp->phy_mutex);
+
 	return ret;
 }
 
@@ -749,14 +747,13 @@ static int qcom_qmp_phy_init(struct phy *phy)
 		if (ret) {
 			dev_err(qmp->dev, "failed to enable %s clk, err=%d\n",
 				qmp->cfg->clk_list[i], ret);
-			while (--i >= 0)
-				clk_disable_unprepare(qmp->clks[i]);
+			goto err_clk;
 		}
 	}
 
 	ret = qcom_qmp_phy_com_init(qmp);
 	if (ret)
-		goto err_com_init;
+		goto err_clk;
 
 	if (cfg->has_lane_rst) {
 		ret = reset_control_deassert(qphy->lane_rst);
@@ -804,7 +801,7 @@ static int qcom_qmp_phy_init(struct phy *phy)
 		reset_control_assert(qphy->lane_rst);
 err_lane_rst:
 	qcom_qmp_phy_com_exit(qmp);
-err_com_init:
+err_clk:
 	while (--i >= 0)
 		clk_disable_unprepare(qmp->clks[i]);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

             reply	other threads:[~2017-06-20  5:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-20  5:57 Vivek Gautam [this message]
2017-07-31  5:28 ` [PATCH] phy: qcom-qmp: Fix failure path in phy_init functions Vivek Gautam
2017-08-02  5:09   ` Kishon Vijay Abraham I
2017-08-02  5:35     ` Vivek Gautam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1497938238-19101-1-git-send-email-vivek.gautam@codeaurora.org \
    --to=vivek.gautam@codeaurora.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox