Re: [PATCH v2 4/4] PCI: qcom: Replace PERST sleep time with proper macro

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

On 5/6/2025 1:09 PM, Niklas Cassel wrote:
> Replace the PERST sleep time with the proper macro (PCIE_T_PVPERL_MS).
> No functional change.
> 
> Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
> ---
>   drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 01a60d1f372a..fa689e29145f 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -289,7 +289,7 @@ static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
>   static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
>   {
>   	/* Ensure that PERST has been asserted for at least 100 ms */
> -	msleep(100);
> +	msleep(PCIE_T_PVPERL_MS);
>   	gpiod_set_value_cansleep(pcie->reset, 0);
>   	usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
>   }