From: Jordan Crouse <jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [PATCH 6/8] drm/msm/adreno: Convert the show/crash file format
Date: Thu, 8 Feb 2018 10:31:55 -0700 [thread overview]
Message-ID: <1518111117-7408-7-git-send-email-jcrouse@codeaurora.org> (raw)
In-Reply-To: <1518111117-7408-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Convert the format of the 'show' debugfs file and the crash
dump to a format resembling YAML. This should be easier to
parse and be more flexible for future changes and expansions.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---
Documentation/gpu/drm-msm-crash-dump.txt | 29 +++++++++++++++++++++++++++++
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 23 ++++++++++++++---------
2 files changed, 43 insertions(+), 9 deletions(-)
create mode 100644 Documentation/gpu/drm-msm-crash-dump.txt
diff --git a/Documentation/gpu/drm-msm-crash-dump.txt b/Documentation/gpu/drm-msm-crash-dump.txt
new file mode 100644
index 0000000..ec56640
--- /dev/null
+++ b/Documentation/gpu/drm-msm-crash-dump.txt
@@ -0,0 +1,29 @@
+# drm/msm GPU crash dump format
+#
+# This is a description of the format of the drm/msm GPU crash dump format that
+# can be read from /sys/kernel/dri/X/show or from devcoredump following a GPU
+# hang or fault
+
+---
+kernel: # [string] The kernel version as printed by UTS_RELEASE
+module: # [string] The module that generated the crash dump
+time: # [seconds.microseconds] The kernel time at crash
+comm: # [string] comm string for the binary that generated the fault
+ # (if known)
+cmdline: # [string] the cmdline for the binary that generated the fault
+ # (if known)
+revision: # [ id core.major.minor.patchlevel] The GPU id followed by the
+ # individual components of the id separated by dots
+rbbm-status: # [hex] The current value of RBBM_STATUS which shows what GPU
+ # components were in use at the time of the crash
+ringbuffer: # Ringbuffer data. There will be a sequence for each ringbuffer
+ -id: # [decimal] Ringbuffer identifier (0 based index)
+ last-fence: # [decimal] The last fence issued on the ring
+ retired-fence: # [decimal] THe last fence retired on the ring
+ rptr: # [decimal] The current read pointer (rptr) for the ring
+ wptr: # [decimal] The current write pointer (wptr) for the ring
+registers: # Sets of register values. This section can be used multiple
+ # times for different ranges of registers. Each register will be
+ # on its own line.
+ - [offset, value] # offset: [hex] byte offset of the register
+ # value: [hex] value of the register
diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index e86238ce..920db2e 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -458,23 +458,28 @@ void adreno_show(struct msm_gpu *gpu, struct msm_gpu_state *state,
if (IS_ERR_OR_NULL(state))
return;
- drm_printf(p, "status: %08x\n", state->rbbm_status);
drm_printf(p, "revision: %d (%d.%d.%d.%d)\n",
adreno_gpu->info->revn, adreno_gpu->rev.core,
adreno_gpu->rev.major, adreno_gpu->rev.minor,
adreno_gpu->rev.patchid);
- for (i = 0; i < gpu->nr_rings; i++) {
- drm_printf(p, "rb %d: fence: %d/%d\n", i,
- state->ring[i].fence, state->ring[i].seqno);
+ drm_printf(p, "rbbm-status: 0x%08x\n", state->rbbm_status);
+
+ drm_printf(p, "ringbuffer:\n");
- drm_printf(p, " rptr: %d\n", state->ring[i].rptr);
- drm_printf(p, "rb wptr: %d\n", state->ring[i].wptr);
+ for (i = 0; i < gpu->nr_rings; i++) {
+ drm_printf(p, " - id: %d\n", i);
+ drm_printf(p, " last-fence: %d\n", state->ring[i].seqno);
+ drm_printf(p, " retired-fence: %d\n", state->ring[i].fence);
+ drm_printf(p, " rptr: %d\n", state->ring[i].rptr);
+ drm_printf(p, " wptr: %d\n", state->ring[i].wptr);
}
- drm_printf(p, "IO:region %s 00000000 00020000\n", gpu->name);
- for (i = 0; i < state->nr_registers; i++) {
- drm_printf(p, "IO:R %08x %08x\n",
+ drm_printf(p, "registers:\n");
+ drm_printf(p, " - [offset, value]\n");
+
+ for(i = 0; i < state->nr_registers; i++) {
+ drm_printf(p, " - [0x%04x, 0x%08x]\n",
state->registers[i * 2] << 2,
state->registers[(i * 2) + 1]);
}
--
1.9.1
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno
next prev parent reply other threads:[~2018-02-08 17:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-08 17:31 [RFC v3 0/8] drm/msm: GPU crash state Jordan Crouse
[not found] ` <1518111117-7408-1-git-send-email-jcrouse-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-02-08 17:31 ` [PATCH 1/8] include: Move ascii85 functions from i915 to linux/ascii85.h Jordan Crouse
2018-02-08 17:50 ` Chris Wilson
2018-02-08 17:31 ` [PATCH 3/8] drm/msm/gpu: Capture the state of the GPU Jordan Crouse
2018-02-08 17:31 ` [PATCH 5/8] drm/msm/gpu: Capture the GPU state on a GPU hang Jordan Crouse
2018-02-08 17:31 ` Jordan Crouse [this message]
2018-02-08 17:31 ` [PATCH 8/8] drm/msm/adreno: Add a5xx specific registers for the GPU state Jordan Crouse
2018-02-08 17:31 ` [PATCH 2/8] drm: drm_printer: Add printer for devcoredump Jordan Crouse
2018-02-08 17:31 ` [PATCH 4/8] drm/msm/gpu: Convert the GPU show function to use the GPU state Jordan Crouse
2018-02-08 19:55 ` [Freedreno] " Rob Clark
2018-02-08 17:31 ` [PATCH 7/8] drm/msm/adreno: Add ringbuffer data to " Jordan Crouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1518111117-7408-7-git-send-email-jcrouse@codeaurora.org \
--to=jcrouse-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).