From: Sinan Kaya <okaya@codeaurora.org>
To: netdev@vger.kernel.org, timur@codeaurora.org, sulrich@codeaurora.org
Cc: linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Sinan Kaya <okaya@codeaurora.org>,
Ariel Elior <ariel.elior@cavium.com>,
everest-linux-l2@cavium.com, linux-kernel@vger.kernel.org
Subject: [PATCH v4 11/17] bnx2x: Eliminate duplicate barriers on weakly-ordered archs
Date: Mon, 19 Mar 2018 22:42:26 -0400 [thread overview]
Message-ID: <1521513753-7325-12-git-send-email-okaya@codeaurora.org> (raw)
In-Reply-To: <1521513753-7325-1-git-send-email-okaya@codeaurora.org>
Code includes wmb() followed by writel(). writel() already has a
barrier on some architectures like arm64.
This ends up CPU observing two barriers back to back before executing
the register write.
Since code already has an explicit barrier call, changing writel() to
writel_relaxed().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 9 ++++++++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 4 ++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 21 +++++++++++----------
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 2 +-
5 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 352beff..ac38db9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -166,6 +166,12 @@ do { \
#define REG_RD8(bp, offset) readb(REG_ADDR(bp, offset))
#define REG_RD16(bp, offset) readw(REG_ADDR(bp, offset))
+#define REG_WR_RELAXED(bp, offset, val) writel_relaxed((u32)val,\
+ REG_ADDR(bp, offset))
+
+#define REG_WR16_RELAXED(bp, offset, val) \
+ writew_relaxed((u16)val, REG_ADDR(bp, offset))
+
#define REG_WR(bp, offset, val) writel((u32)val, REG_ADDR(bp, offset))
#define REG_WR8(bp, offset, val) writeb((u8)val, REG_ADDR(bp, offset))
#define REG_WR16(bp, offset, val) writew((u16)val, REG_ADDR(bp, offset))
@@ -760,7 +766,8 @@ struct bnx2x_fastpath {
#endif
#define DOORBELL(bp, cid, val) \
do { \
- writel((u32)(val), bp->doorbells + (bp->db_size * (cid))); \
+ writel_relaxed((u32)(val),\
+ bp->doorbells + (bp->db_size * (cid))); \
} while (0)
/* TX CSUM helpers */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index a5265e1..a8ce5c5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -522,8 +522,8 @@ static inline void bnx2x_update_rx_prod(struct bnx2x *bp,
wmb();
for (i = 0; i < sizeof(rx_prods)/4; i++)
- REG_WR(bp, fp->ustorm_rx_prods_offset + i*4,
- ((u32 *)&rx_prods)[i]);
+ REG_WR_RELAXED(bp, fp->ustorm_rx_prods_offset + i * 4,
+ ((u32 *)&rx_prods)[i]);
mmiowb(); /* keep prod updates ordered */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 74fc9af..2dea1b6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -1608,8 +1608,8 @@ static void bnx2x_hc_int_enable(struct bnx2x *bp)
} else
val = 0xffff;
- REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
- REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
+ REG_WR_RELAXED(bp, HC_REG_TRAILING_EDGE_0 + port * 8, val);
+ REG_WR_RELAXED(bp, HC_REG_LEADING_EDGE_0 + port * 8, val);
}
/* Make sure that interrupts are indeed enabled from here on */
@@ -1672,8 +1672,8 @@ static void bnx2x_igu_int_enable(struct bnx2x *bp)
} else
val = 0xffff;
- REG_WR(bp, IGU_REG_TRAILING_EDGE_LATCH, val);
- REG_WR(bp, IGU_REG_LEADING_EDGE_LATCH, val);
+ REG_WR_RELAXED(bp, IGU_REG_TRAILING_EDGE_LATCH, val);
+ REG_WR_RELAXED(bp, IGU_REG_LEADING_EDGE_LATCH, val);
/* Make sure that interrupts are indeed enabled from here on */
mmiowb();
@@ -3817,8 +3817,8 @@ static void bnx2x_sp_prod_update(struct bnx2x *bp)
*/
mb();
- REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
- bp->spq_prod_idx);
+ REG_WR16_RELAXED(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
+ bp->spq_prod_idx);
mmiowb();
}
@@ -7761,7 +7761,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, bool is_pf)
barrier();
DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
ctl, igu_addr_ctl);
- REG_WR(bp, igu_addr_ctl, ctl);
+ REG_WR_RELAXED(bp, igu_addr_ctl, ctl);
mmiowb();
barrier();
@@ -9720,13 +9720,14 @@ static void bnx2x_process_kill_chip_reset(struct bnx2x *bp, bool global)
barrier();
mmiowb();
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
- reset_mask2 & (~stay_reset2));
+ REG_WR_RELAXED(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+ reset_mask2 & (~stay_reset2));
barrier();
mmiowb();
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, reset_mask1);
+ REG_WR_RELAXED(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+ reset_mask1);
mmiowb();
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index ffa7959..40e55d8 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -105,7 +105,7 @@ static void bnx2x_vf_igu_ack_sb(struct bnx2x *bp, struct bnx2x_virtf *vf,
DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n",
ctl, igu_addr_ctl);
- REG_WR(bp, igu_addr_ctl, ctl);
+ REG_WR_RELAXED(bp, igu_addr_ctl, ctl);
mmiowb();
barrier();
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 76a4668..3b2f1bd 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -170,7 +170,7 @@ static int bnx2x_send_msg2pf(struct bnx2x *bp, u8 *done, dma_addr_t msg_mapping)
wmb();
/* Trigger the PF FW */
- writeb(1, &zone_data->trigger.vf_pf_channel.addr_valid);
+ writeb_relaxed(1, &zone_data->trigger.vf_pf_channel.addr_valid);
/* Wait for PF to complete */
while ((tout >= 0) && (!*done)) {
--
2.7.4
next prev parent reply other threads:[~2018-03-20 2:42 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-20 2:42 [PATCH v4 00/17] netdev: Eliminate duplicate barriers on weakly-ordered archs Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 01/17] i40e/i40evf: " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 02/17] ixgbe: eliminate " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 03/17] igbvf: " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 04/17] igb: " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 05/17] ixgbevf: keep writel() closer to wmb() Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 06/17] ixgbevf: eliminate duplicate barriers on weakly-ordered archs Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 07/17] fm10k: Eliminate " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 08/17] drivers: net: cxgb: " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 09/17] net: qla3xxx: " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 10/17] qlcnic: " Sinan Kaya
2018-03-20 2:42 ` Sinan Kaya [this message]
2018-03-22 10:10 ` [PATCH v4 11/17] bnx2x: " Kalluru, Sudarsana
2018-03-20 2:42 ` [PATCH v4 12/17] net: cxgb4/cxgb4vf: " Sinan Kaya
2018-03-21 23:03 ` Casey Leedom
2018-03-22 0:00 ` okaya
2018-03-20 2:42 ` [PATCH v4 13/17] net: cxgb3: " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 14/17] net: qlge: " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 15/17] bnxt_en: " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 16/17] qed/qede: " Sinan Kaya
2018-03-20 2:42 ` [PATCH v4 17/17] net: ena: " Sinan Kaya
2018-03-25 12:06 ` Belgazal, Netanel
2018-03-25 13:33 ` okaya
2018-03-21 15:56 ` [PATCH v4 00/17] netdev: " David Miller
2018-03-21 19:06 ` Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521513753-7325-12-git-send-email-okaya@codeaurora.org \
--to=okaya@codeaurora.org \
--cc=ariel.elior@cavium.com \
--cc=everest-linux-l2@cavium.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=sulrich@codeaurora.org \
--cc=timur@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).